Submission Preparation Checklist

• Typescript requirements.

              The article should have the results of the finished research and its stages; literate presentation, which is consistent in style, the conclusions are proved and logical.

              The author may publish only 2 articles in a volume.

              Printed and electronic versions (Microsoft Word document) of the article are given to Editors, as well as an expert report on the possibility to publish the article, and information about the authors (first name, middle name and last name; degree level, academic title, working place, position, contact details (contact phone number, e-mail)).

              Structure of the article: Universal Decimal Classification, title, the authors, annotation, key words, full text of the article, reference. The title, annotation, key words and information about the authors are given in English on the separate page.

              Format: mirror margins, head margin – 23, bottom margin -23, right margin – 25 mm. Font – Times New Roman, font size – 14. Indention - 0,7 cm, paragraph interval - 0 points, line interval – sesquialteral. Pictures and diagrams should be grouped and have the names.

   

• Reference guidelines for Reference List in Latin.

  If the article with the reference is translated into English and published in the English version, it is necessary to mark the reference to the translated source! You can find a translated source on web-site: http://www.mathnet.ru.

  As a rule bibliographical entry of the articles has the following sequence: authors (transliteration), translation of the title into English, the title of the article (transliteration) in square brackets, name of the source (transliteration in italics), publisher’s imprint in English.

  Pay special attention to the fact that all the words except the articles, conjunctions and prepositions in the title of the articles and names of periodicals are started with capital letters.

  Examples of bibliographical entry of the Russian articles are given below:

  Articles from journals:

  Zagurenko A.G., Korotovskikh V.A., Kolesnikov A.A., Timonov A.V., Kardymon D.V. Techno-economic Optimization of the Design of Hydraulic Fracturing [Tekhniko-ekonomicheskaya optimizatsiya dizaina gidrorazryva plasta]. Neftyanoe khozyaistvo [Oil Industry], 2008, no.11, pp. 54-57.

  Dyachenko V.D., Krivokolysko S.G., Nesterov V.N., Litvinov V.P. Techno-economic Optimization of the Design of Hydraulic Fracturing [Tekhniko-ekonomicheskaya optimizatsiya dizaina gidrorazryva plasta]. Khim. Geterotsikl. Soedin., 1996, vol. 12, no. 9, p. 1243.

  Yefremenkova V.M., Startseva O.B., Chumakova N.F. Quality Criteria of Bibliographic Databases [Kriterii kachestva bibliograficheskikh baz dannykh]. Nauchno-Tech. Inf., Ser. 2, 2009, no. 2, pp. 25–29.

  Articles form electronic journals:

  Swaminathan V., Lepkoswka-White E., Rao B.P. Browsers or Buyers in Cyberspace? An Investigation of Electronic Factors Influencing Electronic Exchange. J. of Computer-Mediated Communication, 1999, vol. 5, no. 2, available at: www.ascusc.org/jcmc/vol5/issue2/

  Conference proceedings:

  Usmanov T.S., Gusmanov A.A., Mullagalin I.Z., Muhametshina R.Ju., Chervyakova A.N., Sveshnikov A.V. Features of the Design of Field Development with the Use of Hydraulic Fracturing [Osobennosti proektirovaniya razrabotki mestorozhdeniy s primeneniem gidrorazryva plasta]. Trudy 6 Mezhdunarodnogo Simpoziuma “Novye resursosberegayushchie tekhnologii nedropol'zovaniya i povysheniya neftegazootdachi” [Proc. 6th Int. Technol. Symp. “New Energy Saving Subsoil Technologies and the Increasing of the Oil and Gas Impact”].Moscow, 2007, pp. 267-272.

    The main point in conference proceedings is the name of the conference which is in the original language (use transliteration if there is no English name) in italics. In brackets there is the translation of the name into English. Publisher’s imprint such as location, place of publication, the number of pages are in English as well.

    Articles in conference proceedings:

  Antina E.V., Berezin M.B., Semeikin A.S., Dudina N.A., Yutanova S.L., Guseva G.B. Abstracts of Papers. XII Molodezhnaya konferentsiya po organicheskoi khimii [XII Youth Conference on Organic Chemistry]. Suzdal, 2009, p. 248.

  Iznairov B.M. Obespechenie ratsional’nykh geometricheskikh parametrov mnogozvennykh soedinenii i rezervirovanie ikh elementov [Rational Geometric Parameters of Multicomponent Joints and Backup of Their Components].Saratov, SGTU, 2008.

  Riabinina A.A., BerezinaE.V., Usol’tseva N.V. Surface Tension and Lyotropic Mesomorphism in Systems Consisting of Nonionogenic Surfactant and Water. Liotropnye zhidkie kristally i nanomaterialy: sbornik statei VII Mezhdunarodnoi nauchnoi konferentsii [Lyotropic Liquid Crystals and Nanomaterials: Proceedings of the Seventh International Conference].Ivanovo, Ivanovskii Gos. Univ., 2009.

  Books (monographs, collected volumes, conference proceedings):

  Belaya kniga po nanotekhnologiyam: issledovaniya v oblasti nanochastits, nanostruktur i nanokompozitov v Rossiiskoi Federatsii (po materialam Pervogo Vserossiiskogo soveshchaniya uchenykh, inzhenerov i proizvoditelei v oblasti nanotekhnologii [White Book in Nanotechnologies: Studies in the Field of Nanoparticles, Nanostructures and Nanocomposites in the Russian Federation: Proceedings of the First All-Russian Conference of Scientists, Engineers and Manufacturers in the Field of Nanotechnology].Moscow, LKI, 2007.

  Nenashev M.F. Poslednee pravitel’stvo SSSR [Last Government of theUSSR].Moscow, Krom Publ., 1993. 221 p.

  From Disaster to Rebirth: the Causes and Consequences of the Destruction of the Soviet Union[Ot katastrofy k vozrozhdeniju: prichiny i posledstvija razrushenija SSSR].Moscow, HSE Publ., 1999. 381 p.

  Kanevskaya R.D. Matematicheskoe modelirovanie gidrodinamicheskikh protsessov razrabotki mestorozhdenii uglevodorodov [Mathematical Modeling of Hydrodynamic Processes of Hydrocarbon Deposit Development].Izhevsk, 2002. 140 p.

  Latyshev V.N., Tribologiya rezaniya. Kn. 1: Friktsionnye protsessy pri rezanie metallov [Tribology of Cutting, Vol. 1: Frictional Processes in Metal Cutting],Ivanovo, Ivanovskii Gos. Univ., 2009.

  Web-site reference:

  APA Style (2011). Available at: http://www.apastyle.org/apa-style-help.aspx (accessed 5 February 2011).

  Pravila Tsitirovaniya Istochnikov [Rules for the Citing of Sources]. Available at: http://www.scribd.com/doc/1034528/ (accessed 7 February 2011).

  The name of the source no matter whether it is a journal, monograph, collected volume or the name of the conference should be in italics as given in the above examples. Additional information, that is translation of the name of the source into English, is given in square brackets in the same font used for all elements of description.

  Rules for transliteration

  On web-site http://www.translit.ru/ one can use the program of the Russian text transliteration into Latin for free. If you select the system Board of Geographic Names (BGN),

• Annotation guidelines.

              Recommended volume of annotation is less than 500 words. It includes the reasons for the selection of the topic and subjects of the article, research methods, results obtained, their novelty, assessment of theoretical and practical importance.