ВЛИЯНИЕ ВВЕДЕНИЯ ПЕНОГРАФИТА НА ПРОЧНОСТЬ ЦЕМЕНТНО-ПЕСЧАНОГО РАСТВОРА

R. A. Zhivtsova; B. Ya. Trofimov; R. M. Akhmedyanov; M. S. Zhivtsov

Authors

R. A. Zhivtsova South Ural State University, Chelyabinsk, Russian Federation
B. Ya. Trofimov South Ural State University, Chelyabinsk, Russian Federation
R. M. Akhmedyanov ООО UralNIIstrom, Chelyabinsk, Russian Federation
M. S. Zhivtsov ООО UralNIIstrom, Chelyabinsk, Russian Federation

Keywords:

Portland cement, granulated blast furnace slag, graphite foam, compressive strength.

Abstract

This article considers the main effects from introducing graphite foam additives. Graphite foam, the method of its introducing to the composition of mixtures and the dosage have been se-lected based on low costs but significant efficiency. With the use of graphite foam, high values of physical and mechanical characteristics, when replacing a significant part of Portland cement with waste from metallurgical production, have been achieved. The conducted comparison has revealed an increase in the strength characteristics of the cement stone based on Portland cement, ground granu-lated blast furnace slag and their mixture during storage under normal conditions and as a result of heat and moisture treatment with the introducing of graphite foam. The composition, containing 60% of granulated blast furnace slag by weight of the binder, provides the greatest effect when adding graphite foam. Based on the obtained results, graphite foam proves to be a competitive additive in comparison with other additives, which are popular in the market. In particular, due to the simple procedure of ex-tracting and adding, the additive of graphite foam is not inferior in efficiency to graphene.

References

Кондаков, А.И. Перспективы использова-ния окисленного графена в строительных мате-риалах / А.И. Кондаков, З.А. Михалева // Графен и родственные структуры: синтез, производство и применение: сб. тр. науч.-практ. конф. – Тамбов: ИП Чеснокова А.В., 2015. – С. 55–56.

Булатова, И.М. Графен: свойства, полу-чение, перспективы применения в нанотехнологии и нанокомпозитах / И.М. Булатова // Вестник Ка-занского технологического университета. – 2011. – № 10. – С. 45–48.

A novel cement-based hybrid materiai / A.G. Nasibulin, S.D. Shandakov, L.I. Nasibulina et al. //New Journal of Physics. – 2009. – № 11. – Р. 023013, 2–11.

Preparation and mechanical properties of graphene oxide: cement nanocomposites / Fakhim Babak, Hassani Abolfazl, Rashidi Alimorad, P. Ghod-ousi // Hindawi Publishing Corporation, The Scientif-ic World Journal. – 2014. – Vol. 2014. – P. 1–9.

Федорова, Г.Д. Исследование устойчиво-сти водной структуры оксида графена / Г.Д. Фе-дорова, Г.Н. Александров, С.А. Смагулова // Строительные материалы: сб. тр. конф. – М.: Рекламно-издательская фирма «Стройматериа-лы», 2015. – Вып. 2. – С. 15–24.

Графит, ИГ и ТРГ (краткий обзор). – http://docplayer.ru/26062756-Grafit-ig-i-trg-kratkiy-obzor.html.

Sheka E.F. Molecular theory of graphene oxide / E.F. Sheka, N.A. Popova // Phys Chem. – 2013. – P. 1–22.

Makar, J.M. Carbon nanotube/cement com-posites - early results and potential applications / J.M. Makar, J.C. Margeson, J. Luh // Proceedings of the 3rd International Conference on Construction Materials: Performance, Innovations and Structural Implications, Vancouver, 22–24 August 2005, P. 1–10.

Xia Cuia, Mechanical, thermal and electro-magnetic properties of nanographite platelets mod-ified cementitious composites / Xia Cuia, Shengwei Sunb, Baoguo Hana // Composites Part A: Applied Science and Manufacturing. – 2017. – Vol. 93. – P. 49–58.

Алексенко, А.Г. Графен / А.Г. Алексеенко. – М.: Изд-во «Лаборатория знаний», 2014. – 177 с.

Mechanical properties and microstructure of a graphene oxide-cement composite / Zhu Pan, Li He, Ling Qiu et al. // Cement & Concrete Compo-sites. – 2015. – Vol. 58. – P. 140–147.

Snigdha Sharma, Comparative effects of pristine and ball-milled graphene oxide on physico-chemical characteristics of cement mortar nanocom-

posites / Snigdha Sharma, N.C. Kothiyal // Construc-tion and Building Materials. – 2016. Vol. 115. – P. 256–268.

Carbon nanotubes and carbon nanofibers for enhancing the mechanical properties of nanocomposite cementitious materials / B.M. Tyson, Rashid K. Abu Al-Rub, Ardavan Yazdanbakhsh, Zachary Grasley // Journal of Materials in Civil Engineering. – 2011. – Vol. 23 (7). – P. 1028–1035.

Mechanical properties of nanocomposite cement incorporating surface-treated and untreated carbon nanotubes and carbon nanofibers / Rashid K. Abu Al-Rub, Bryan M. Tyson, Ardavan Yazdanbakhsh, Zachary Grasley // Journal of Nanomechanics and Micromechanics. – 2012. – Vol. 2(1). – P. 1-6.

Ultrahigh electron mobility in suspended graphene / K.I. Bolotin, K.J. Sikes, Z. Jiang, M. Klima et al. // Solid State Commun. – 2008. – Vol. 146. – P. 351–355.

Morozov, S.V. Giant intrinsic carrier mo-bilities in graphene and its bilayer / S.V. Morozov, K.S. Novoselov, M.I. Katsnelson et al. // Phys. Rev. Lett. – 2008. – Vol. 100, 016602.

Measurement of the elastic properties and intrinsic strength of monolayer graphene / C. Lee, X. Wei, J.W. Kysar, J. Hone // Science. – 2008. – Vol. 321. – P. 385–388.

Pershin, V. Improving functional and envi-ronmental performance of Portland cement-based materials by graphene nanostructures / V. Pershin, Ali Mashhadani, Denis Melekhin, A. Osipov // MATEC Web Conf. – 2020. – Vol. 315, 06006. – P. 1–8.

Аль-шиблави, К.А. Модифицирование це-мента малослойным графеном / К.А. Аль-шиблави, В.Ф. Першин, Т.В. Пасько // Вектор науки ТГУ. – 2018. – № 4 (46). – С. 6–11.

ГОСТ 310.4-81 Цементы. Методы опре-деления предела прочности при изгибе и сжатии (с Изменениями № 1, 2). – М.: ИПК Изд-во стан-дартов, 2003. – 17 c.