ANALYSIS OF TEMPERATURE CONDITIONS IN THE AREA OF TRANSLUCENT CLADDING AT SPACE HEATING
Abstract
Computational simulation in SolidWorks Flow Simulation software system for the process ofheat emission from heating units with the nominal and specified heating surface area is performed.
Thermograms of temperature distribution in a heated space and on the surface of a window are built.
The assessment of temperature conditions of the surface of translucent structures is performed in
terms of moisture condensation. The problem of the areas with low temperature on the surface of
window embrasures is stated at individual regulation of heating capacity of heating units and overestimated
nominal surface area.
Keywords: SolidWorks Flow Simulation, heat flux from the heater, moisture condensation on
the surface of translucent structures.
References
Alyamovskiy A.A. Inzhenernye raschety v SolidWorks Simulation [Engineering calculations in Solid-
Works Simulation]. Moscow, DMK Press Publ., 2010. 464 p.
Skanavi A.N., Mahov L.M. Otoplenie [Heating]. Moscow, ABC Publ., 2002. 576 p.
SP 60.13330.2012. Otoplenie, ventilyatsiya i konditsionirovanie vozdukha [Heating, Ventilation and Air
Conditioning]. Moscow, Russian Ministry of Regional Development Publ., 2012. 81 p.
SP 131.13330.2012. Stroitel'naya klimatologiya [Building Climatology]. Moscow, Russian Ministry of
Regional Development Publ., 2012. 113 p.
GOST 30494–96. Zdaniya zhilye i obshchestvennye. parametry mikroklimata v pomeshcheniya [Residential
and public buildings. Microclimate parameters in the room]. Moscow, Russian State Building Publ., 1999. 7 p.
Nagornaja A.N., Denisjuk E.V. [CFD modeling of the thermal and air mode of movie theater]. Bulletin
of the South Ural State University. Ser. Construction and Architecture, 2013, vol. 13, no. 2, pp. 61–63 (in Russ.).
