ALUMINOUS BINDING MATERIALS BASED ON THE SLAG OF ALUMINOTHERMAL PRODUCTION OF FERROTITANIUM AND CELL CONCRETE ON THEIR BASIS
Abstract
The modified aluminous binding material is developed on the basis of aluminous cement, slag of
aluminothermal output of ferrotitanium and superplasticizing admixtures based on polycarboxylic ether.
The peculiarities of hydration of binding materials in the presence of these additives are examined by the
methods of physical and chemical analysis. It’s shown that at the initial stages of hardening (3–7 days) the
speed of hydration of calcium aluminates to different extents is reduced under the influence of superplasticizing
admixtures based on polycarboxylic ether. The additives which at least slow down hardening are
revealed, their optimal doses are specified. The influence of these additives on a binding property is examined.
The modified binding material with increased fire resistance (1520–1550 С) is obtained. It’s
shown that the use of superplasticizing admixtures based on polycarboxylic ether provides the binding
material, which contains the slag of aluminothermal output of ferrotitanium, with high strength properties.
The heat-resistance cell concrete with the operating temperature up to 1300С is produced on the basis of
the developed binding material, fire clay and fireproof aggregates.
Keywords: heat-resistance cell concrete, high-alumina cement, aluminous cement, modified aluminous
binding, slag of aluminothermal production, slag of ferrotitanium, superplasticizing admixtures
based on polycarboxylic ether, heat-resistant properties, fire resistance, hydration of calcium aluminate,
calcium aluminate hydrate
References
Abyzov V.A. [Choice of rational fields of application of industrial waste in the technology of heat-resistant
concrete]. Bulletin of the South Ural State University. Ser. Construction and Architecture, 2008, iss. 7, no.
(125), pp. 37–39.
Abyzov A.N., Rytvin V.M., Abyzov V.A., Perepelitsyn V.A., Grigor'ev V.G. [Heat-resisting and refractory
concretes on the basis of binders and aggregates from slag Ferroalloy production]. Trudy mezhdunarodnogo kongressa
«Fundamental'nye osnovy tekhnologiy pererabotki i utilizatsii tekhnogennykh otkhodov [Proceedings of the
international Congress "Fundamental basis of technologies of processing and recycling of industrial waste]. Ekaterinburg,
OOO UIPTs Publ., 2012, pp. 304–306.
Abyzov A.N., Rytvin V.M., Abyzov V.A., Perepelitsyn V.A., Grigor'ev V.G. Unroasted thermal insulating
refractory materials based on high-alumina cement and phosphate binders. Refractories and Industrial Ceramics,
, no. 52(4), pp. 303–306.
Abyzov V.A., Abyzov A.N., Abramov A.K., Rytvin V.M., Perepelitsyn V.A., Khvatov A.V. [Dry mixtures
for heat-resistant concrete based on the processed high-alumina cements and aggregates aluminothermic production].
Novye ogneupory [New refractories], 2013, no. 3, p. 37.
Abyzov A.N., Perepelytsyn V.A., Rytvin V.M., Ignatenko V.G., Klinov O.A. [Heat-resistant concrete based
on aluminothermic slags of the Klyuchevskii Ferroalloys Plant]. [Refractories and Industrial Ceramics], 2007, vol.
, no. 6, pp. 397–400.
Perepelitsyn V.A., Koroteev V.A., Rytvin V.M., Gil’varg S.I., Grigor’ev V.G., Ignatenko V.G., Abyzov
A.N., Kutalov V.G. [High-alumina technogenic raw material]. [Refractories and Industrial Ceramics], 2011, vol.
, no. 2, pp. 84–94.
Perepelitsyn V.A., Rytvin V.M., Koroteev V.A., Makarov A.B., Grigor'ev V.G., Gil'varg S.I., Abyzov
V.A., Abyzov A.N., Tabulovich F.A. [Technogenic mineral raw materials of the Urals]. Ekaterinburg, RIO UrO
RAN Publ., 2013. 332 p.
Kuznetsova T. V. Tret'yakova N. S. [Development of Compositions for Refractory Material Containing
Aluminomagnesian Spinel]. [Glass and Ceramics], 2004, vol. 61, no. 5–6, pp. 154–156.
Dubrovin A.S., Zaldat G.I., Ignatenko G.F. [Obtaining high-alumina clinker cement from slag from smelting
of chromium and ferro-titanium]. Proizvodstvo ferrosplavov [The production of ferroalloys]. Chelyabinsk,
Yuzhno-Ural'skoe knizhnoe izdatel'stvo Publ., 1972, iss. 1, pp. 60–70.
Abyzov V.A. Chernogorlov S.N., Rechkalov D.A. [Modified calcium aluminate binders based on slag
Ferroalloy production]. Nauka YuUrGU. Materialy 66-y nauchnoy konferentsii (Elektronnyy resurs) [Science
YuUrGU. Materials 66th scientific conference (Electronic resource)]. Chelyabinsk, South Ural St. Univ. Publ.,
, pp. 861–866.
Mel'nik M.T. Ilyukha N.G., Shapoval N.N. Ogneupornye tsementy [Refractory cements]. Kiev,Vishcha
shkola Publ., 1984. 121 p.
Abyzov V.A. [Binders, adhesives and heat-resistant concrete with high-alumina dispersed industrial
waste]. Ogneupory i tekhnicheskaya keramika [Refractories and technical ceramics], 2008, no. 9, pp. 40–44.
Abyzov V.A. Rytvin V.M., Rechkalov D.A., Chernogorlov S.N. [Reactive alumina refractory cements
based on dispersed waste recycling slag carbon-free ferrochromium]. Novye ogneupory [New refractories], 2014,
no. 3, pp. 17–18.
Nekrasov K.D. Liberman I.I. [Heat-resistant concrete on aluminous cement and slag Portland cement with
additions of plasticizers]. Zharostoykie i obychnye betony pri deystvii povyshennykh i vysokikh temperature [Heatresistant
and conventional concrete under the action of elevated and high temperatures.]. Moscow, NIIZhB Publ.,
, pp. 30–37.
Khommer Kh. Vutts K., Zayerl' Y. [The use of polycarboxylate ethers as deflocculants in refractory concretes].
Ogneupory i tekhnicheskaya keramika [Refractories and technical ceramics], 2007, no. 12, pp. 43–47.
Khauk Kh.-G. [High-performance superplasticizers on the basis of ether polycarboxylates. Potential use in
modern concrete technology]. Beton, syr'e, tekhnologii, ekspluatatsiya: sb. nauch. tr. Mezhdunar. nauchno-tekhn.
konf. ConLife-2007 [Concrete, raw materials, technology, operation: collection of scientific works of International
scientific-technical conference ConLife-2007]. St. Petersburg, 2007, pp. 78–84.
Abyzov V.A. [Features of hydration of high-alumina cement from slag aluminothermic production of superplasticizers
additives]. Ogneupory i tekhnicheskaya keramika [Refractories and technical ceramics], 2009,
no. 4–5, pp. 80-84.
