DEWATERING OF SLUDGE FORMED DURING THE REAGENT DECOMPOSITION OF WASTE EMULSION FLUIDS
Abstract
The article presents the results of studies on mechanical dewatering of sludge formed during
the decomposition of waste emulsion fluids by a solid-phase reagent based on modified bentonite
clay and flocculants. The sludge on the basis of emulsion fluids, produced in metallurgical and mechanical
engineering enterprises, in the liquid form are discharged into the “dirty” recycling of water
supply in industrial companies. It’s inadmissible, as it leads to their accumulation in the solid state.
This work presents the results of laboratory experiments on dehydration of the sludge by filtering
under gravitational conditions, vacuum and extra pressure, with the use of flocculants of various actions.
The simulation of the manufacturing equipment operation is made in accordance with well
known techniques. The best results are obtained by sludge filtration on the models of a drum vacuum
filter and a chamber filter press. The article presents main technological parameters of industrial
equipment for dehydration, specified according to the results of laboratory experiments and
recommendations for choosing the technology of mechanical dewatering of the considered sediment.
These data can be used when designing facilities for treatment of waste water in metallurgical
and mechanical engineering companies.
Keywords: waste emulsion fluid, modified bentonite clay, flocculants, sludge, dewatering.
References
Dolmatov A.P. [Test soluble of Henkel continuous five-stand mill 2030 of endless rolling]. Metallurg
[Metallurg], 2014, no. 9, pp. 80–86 (in Russ).
Abe H., Nomura T., Kubota Y. [Lubrication of tube in cold pilgering]. [Journal of material processing
technology], 2014, vol. 214, no. 8, pp. 16271637.
Flynn D.J. [The Nalco water handbook]. New York, McGraw-Hill Professional Publ., 2009. 1280 p.
Sviridov V.V., Nikiforov A.F. [Regulation of the wettability of particulate materials by using organic
modifiers]. Izvestija Cheljabinskogo nauchnogo centra UrO RAN, 2004, no. 1, pp. 153–159 (in Russ).
Driker B.N., Obozhin A.N. [New saving technology]. TehNadzor, 2009, no. 12, pp. 52–53 (in Russ).
Yuan S., Tong M., Wu G. [Destabilization of emulsion by natural minerals]. Journal of hazardous materials,
, vol. 192, pp. 1882–1885.
Galkin Yu.A., Ulasovets E.A., Selitskiy G.A., Klimenkov E.V., Mustafin A.R., Popov Yu.G. [Cleaning
emulsion wastewater]. Vodoochistka. Moscow, Prosveshhenie Publ., 2008, no. 5, pp. 45–48 (in Russ.).
Galkin Ju.A., Drobnyj D.O., Drobnyj O.F. [Development of technology for the decomposition of the
waste of Metalworking fluids rolling mills-rolling LPC-5 OAO "Magnitogorsk iron and steel works"]. Aktual'nye
problemy sovremennoj nauki, tehniki i obrazovanija: materialy 71-oj mezhdunarodnoj nauchno-tehnicheskoj konferencii
[Actual problems of modern science, technology and education: proceedings of the 71st international
scientific-technical conference]. Magnitogorsk, Magnitogorskij gosudarstvennyj tehnicheskij universitet im. G. I.
Nosova Publ., 2014, vol. 1, pp. 195– 99 (in Russ.).
Tarleton E.S., Wakeman R.J. [Solid/liquid separation: equipment selection and process design]. Amsterdam,
Boston, Butterworth-Heinemann Publ., 2007, 1st ed, 448 p.
Turovskij I.S. Osadki stochnyh vod. Obezvozhivanie i obezzarazhivanie [Sewage sludge. Dehydration and
decontamination]. Moscow, DeLi print Publ., 2008. 376 p.
GOST 26095-84. Tkani polijefirnye tehnicheskie fil'troval'nye. Tehnicheskie uslovija (s Izmeneniem № 1)
[State Standart 26095-84. Fabric postelyer technical filter. Technical specifications (amendment no. 1)]. Moscow,
Standartinform Publ., 1984. 14 p.
Zhuzhikov V.A. Fil'trovanie: teorija i praktika razdelenija suspenzij [Filtration: theory and practice of
separation of suspensions.]. Moscow, Himija Publ., 1980. 400 p.
Aksenov V.I., Aksenov E.V., Galkin Yu.A., Ladygichev M.G., Nikulin V.A. Vodnoe hozjajstvo promyshlennyh
predprijatij [Water management of industrial enterprises]. Moscow, Teplotehnik Publ., 2005. 432 p.
