Формообразование отверстий под резьбу вращающимся пуансоном в тонколистовых заготовках с принудительной подачей
Аннотация
Ключевые слова
Полный текст:
PDFЛитература
GOST 16093–2004 Osnovnye normy vzaimozamenyaemosti. Rez'ba metricheskaya. Dopuski. Posadki s zazorom [State Standard 16093–2004. Basic rules of interchangeability. Metric thread. Tolerances. Landing with a Backlash]. Moscow, Standartinform, 2005. 39 p.
Ivanov M.N. Detali mashin: Uchebnik dlya vuzov [Machine Parts: Textbook for High Schools]. Moscow Vysshaja shkola Publ., 2000. 382 p.
Shalamov P.V. [Manufacturing of the Hole Made by Rotating Tool in Sheet Blank]. Bulletin of the South Ural State University. Ser. Mechanical Engineering Industry, 2011, iss. 18, no. 31 (248), pp. 81–84. (in Russ.)
Shalamov P.V. Formoobrazovanie otverstiy pod rez'bu vrashchayushchimsya puansonom v tonkolistovykh zagotovkakh. Dis. kand. tekhn. nauk [Manufacturing of The Hole Made by Rotating Tool in Thin Sheet Blank. Cand. Sci. Diss.]. Chelyabinsk, 2012. 153 p.
Verbindungs Buchsen Durch Neuartige Fließlochtechnik. Metallhandwerk + Techn., 1980, no. № 3 (82).
Hrenov K.K. Svarka, rezka i payka metallov [Welding, Cutting and Soldering Metals]. Moscow, Mashinostroenie Publ., 1994. 405 p.
Moshchenok V.I., Lalazarova N.A., Timchenko O.N. [Microhadness Testing with Nanoaccurance], Bulletin of Kharkov National Automobile and Highway University, 2008, iss. 42, no. 9 (45), pp. 35–37. (in Russ.)
Guzeev V.I., Shalamov P.V., Shul'tc E.E. [Calculation Geometry of Heading Made by Technical Welding in thin Sheet Metal]. Progressivnye tehnologii v mashinostroenii: sb. nauch. tr. [Progressiv Tehnology in Engineering: Collected Papers]. Cheljabinsk, South Ural St. Univ. Publ., 2006. pp. 175–178.
(in Russ.)
FormDrill. Available at: http://formdrill.com/english/formdrill.htm (accessed 23.06.2014).
Centerdrill. Available at: http://www.centerdrill.de/ (accessed 16.06.2014).
Nanyang Technological University, School of Mechanical and Aerospace Engineering, on the Influence of Workpiece Material on Friction in Microforming and Lubricant Effectiveness. Journal of Materials Processing Technology, April, 2014. pp. 998–1007.
Ссылки
- На текущий момент ссылки отсутствуют.