INFLUENCE OF THE CONDITIONS OF THE CONTINUOUS CAPTURE OF THE SLEEVES ON THE TECHNOLOGICAL PARAMETERS OF THE PROCESS
DOI:
https://doi.org/10.14529/met200107Keywords:
continuous rolling, pipes, experimental research, kinematics, rolling force, metal broadening, mandrel wrap angleAbstract
The development of pipe production has led to the widespread use of continuous mills with a holding mandrel and 3-roll passes for rolling sleeves. This required a refinement of a number of theoretical principles related to a change in the process kinematics. A methodology for determining the energy-power process parameters based on the energy theory has been developed. In order to identify influence patterns of the rolling process parameters on the angle of the mandrel coverage and the broadening magnitude of the roll conducted an experimental study. The average pressure values at the contact with the work rolls and the mandrel are determined by compiling the equation of equilibrium of the force projections on the longitudinal axis. The developed mathematical models and the algorithm for calculating the energy-power parameters of the rolling process of the sleeves in a continuous mill. This model made it possible to determine the efforts of rolling pipes in a continuous mill with sufficient accuracy. The obtained dependences can be used both for research purposes and for calculating the rolling tables on tube rolling units with continuous rolling mills.References
Vydrin A.V., Struin D.O., Chernyh I.N., Shkuratov E.A., Bunjashin M.V. [Theoretical and practical problems of rolling process on modern liners continuous mill]. St. Petersburg, Polytechnic University Publ., 2015, pp. 72–82. (in Russ.)
Shkuratov E.A. Optimizatsiya protsessa nepreryvnoy raskatki gil’z s tsel’yu povysheniya tochnosti goryachekatanykh besshovnykh trub: dis. kand. tekhn. nauk [Optimization of continuous rolling shell casings with a view to improving the accuracy of hot-rolled seamless pipes. Cand. sci. diss.]. Chelyabinsk, 2017. 166 p.
Struin D.O. Sovershenstvovaniye tekhnologii prodol’noy prokatki trub na osnove sozdaniya i ispol’zovaniya novykh nauchno obosnovannykh tekhnicheskikh resheniy: dis. kand. tekhn. nauk [Improved technology based on pipe lengthwise-rolled sections for the creation and use of new science-based technical solutions. Cand. sci. diss.]. Chelyabinsk, 2017. 170 p.
Ku H., Xiao G., Chang Y., Zhang P. Development of Structure of 3-roll Mandrel Pipe Mills and Relevant Comparative Analysis. Steel Pipe, 2015, vol. 44, no. 3, pp. 59–62.
Wang X., Yang W., Hu F., Xia K., Bai C. Optimization of process Equipment and production Practice of ø460 mm PQF Plant. Steel Pipe, 2014, vol. 43, no. 3, pp. 49–54.
Wu J. Characteristics of the Manufacturing Process and Equipment of ø 508 mm 3 roll Pipe Mandrel PQF Mill. Steel Pipe, 2013, vol. 42, no. 3, pp. 44–50.
Li X., Bai Q., Zhou X., Yin X. Optimized Design and Application of Rolls of ø258 mm Mandrel PQF Mill. Steel Pipe, 2012, vol. 41, no. 1, pp. 64–68.
Sun Sh., Guan X., Ding H., Ma Sh. Development of technology of process for PQF rolling Heavy-wall, extra sort-tube. Steel Pipe, 2016, vol. 45, no. 4, pp. 42–45.
Fan Q. Advanced technologies and equipment applied to ø159 FQM 3-roll mandrel mill plant. Sichuan Metallurgy, 2015, vol. 29, no. 1, pp. 19–22.
Potapov I.N., Kolikov A.P., Druyan V.M. Teoriya trubnogo proizvodstva [Theory tube production]. Moscow, Metallurgiya Publ., 1991. 424 p.
Vydrin A.V., Shirokov V.V. [Computer modeling speed continuous rolling of pipes]. Steel, 2011, no. 2, pp. 56–58. (in Russ.)
Osadchiy V.J., Vavilin A.S., Zimovec V.G., Kolikov A.P. Tekhnologiya i oborudovaniye trubnogo proizvodstva [Pipe production technology and equipment]. Moscow, Intermet Engineering Publ., 2007. 560 p.
Vydrin A.V., Fedosienko A.S., Krainov V.I. Protsess nepreryvnoy prokatki [Process of continuous rolling]. Moscow, Metallurgiya Publ., 1970. 456 p.
Vydrin A.V., Al-Jumaili M.J.M., Shkuratov E.A. [Algorithm for calculating the energy parameters of the process of rolling hollow billets on a continuous mill]. Bulletin of Nosov Magnitogorsk State Technical University, 2019, vol. 17, no. 2, pp. 32–37. (in Russ.) DOI: 10.18503/1995-2732-2019-17-2-32-37
Kolikov A.P., Romantsev B.A. Teoriya obrabotki metallov davleniyem [Theory of metal forming]. Moscow, MISIS Publ., 2015. 451 p. (in Russ.)
