ABOUT STRUCTURE AND PROPERTIES OF SOME HEAT-RESISTANT NICKEL ALLOYS

Authors

  • G. V. Tyagunov Ural Federal University named after the first President of Russia B.N.Yeltsin, Ekaterinburg
  • E. E. Baryshev Ural Federal University named after the first President of Russia B.N.Yeltsin, Ekaterinburg
  • A. G. Tyagunov Ural Federal University named after the first President of Russia B.N.Yeltsin, Ekaterinburg
  • I. V. Vandysheva Ural Federal University named after the first President of Russia B.N.Yeltsin, Ekaterinburg
  • N. A. Zaytseva Ural Federal University named after the first President of Russia B.N.Yeltsin, Ekaterinburg
  • V. S. Mushnikov Ural Federal University named after the first President of Russia B.N.Yeltsin, Ekaterinburg

DOI:

https://doi.org/10.14529/met200206

Keywords:

liquid metal, high-resistant alloy, structure, claster, intercluster space, properties

Abstract

Various models of metal melts structure are considered. According to modern research, the structure of the liquid is complex and consists of various atomic associations. They are clusters and intercluster space. There are no clear boundaries between the individual structural components. Intercluster ruptures are gaps about 0.1 nanometers wide that are opened and closed when clusters diverge and convergence during thermal oscillations. Thermodynamic calculations allow to determine the number of clusters and atoms in the cluster and some other characteristics of structural parameters of liquid metal, as well as to find their temperature dependence. The proposed approach to the analysis of structure and properties leads to new information about the state of metal melts. In particular, it is known that properties such as kinematic viscosity, density and surface tension are significantly dependent on the size and number of clusters, as well as the characteristics of intercluster space. In addition, the polytherms of calculated parameters adequately reflect the nature of temperature dependencies of properties. The work examined samples of pure nickel and four heatresistant alloys. Characteristics of the structure of the researched heat-resistant alloys were close in size and type of temperature dependence. The data on liquid nickel are described by a similar temperature dependence and slightly different from heat-resistant nickel alloys. The type of temperature dependencies of the properties of heat-resistant nickel alloys differs significantly from the patterns characteristic of pure metal. Polytherms of kinematic viscosity, density and surface tension of heatresistant nickel alloys change illegally and are characterized by hysteresis, i.e. a mismatch of the magnitude of properties received by heating and cooling. Polythers of specific resistivity of heatresistant nickel alloys in the temperature interval “solidus-liquividus” varies by 3–4 % almost in a leap. The use of various existing models of metal liquids structure allows to expand the possibility of discussing the structure and properties of the studied object and revealing its significant features.

References

Mott N.F. Electrons in Disordering Structures]Advances in Physics (Phil. Mag. Suppl.), 1967, vol. 16, no 61, p. 49.

Elanskiy G.N., Elanskiy D.G. Stroenie i svoystva rasplavov [Structure and Properties of the Melts]. Moscow, MGVMI Publ., 2006. 228 p.

Tsepelev V.S., Konashkov V.V., Baum B.A. et al. Svoystva metallicheskikh rasplavov [Properties of Metal Melts]. Ekaterinburg, UGTU-UPI Publ., 2008, vol. 1. 358 p., vol. 2, 383 p.

Stewart G.W. [X-ray diffraction in liquids] Reviews of Modern Physics, 1930, vol. 2, no. 1, pp. 0116–0122.

Benz C.A., Stewart G.W. The cybotactic condition of isopentane in the region of the critical point Physical Review, 1934, vol. 46, no. 8, pp. 0703–0706.

Kirkwood J.G. Statistical mechanics of fluid mixtures. Journal of Chemical Physics, 1935, vol. 3, no. 5, pp. 300–313.

Kirkwood J.G. Statistical mechanics of liquid solutions. Chemical Reviews, 1936, vol. 19, no. 3, pp. 275–307.

Bernal J.D. An attempt at a molecular theory of liquid structure. Transaction of the Faraday Society, 1937, vol. 33, no. 1, pp. 0002–0007.

Bernal J.D. Geometry of the structure of monoatomic liquids. Nature, 1960, vol. 185, no. 4706, pp. 68–70.

Gingrich N.S. The diffraction of x-rays by liquid elements. Review of Modern Physics. 1943, vol. 15, no. 1, pp. 0090–0110.

Danilov V.I. Stroenie i kristallizatsiya zhidkostey [Structure and Crystallization of Liquids]. Kiev, AN USSR Publ., 1937. 392 p.

Danilov V.I., Radchenko A.V. Rentgenostrukturnye issledovaniya zhidkikh metallov [X-ray investigation of liquid metals]. Solid State Physics, 1937, no. 12, pp.756.

Vilson D.R. Struktura zhidkikh metallov [Structure of Liquid Metals]. Moscow, Metallurgiya Publ., 1973. 221 p.

Ubbelohde A.R. Rasplavlennoe sostojanie veshhestva [The Molten State of Matter]. Moscow, Metallurgiya. Publ., 1982. 376 p.

Vertman A.V., Samarin A.M. Svoystva rasplavov zheleza [Properties of Iron Melts]. Moscow, Nauka. Publ., 1969. 255 p.

Arkharov V.I., Novokhatskiy I.A. Mikrogeterogennoe stroenie zhidkikh metallov [Microheterogeneous structure of liquid metals]. Report of AN SSSR. Publ., 1969, 188, № 5, P. 1069.

Baum B.A. Metallicheskie zhidkosti – problemy i gipotezy [Metal Liquids – Problems and Hypotheses]. Moscow, Nauka, 1979. 120 p.

Baum B.A., Khasin G.A., Tyagunov G.V. et al. Zhidkaya stal' [Liquid Steel]. Moscow, Metallurgiya, 1984. 208 p.

Popel' P.S. Metastable Micro-geterogeneity of Melts in Systems with Eutectic and Monotectic and its Effect on the Alloy Structure after Solidification. Melts, 2005, no. 1. pp.22-48.

Popel' P.S., Sidorov V.E., Brodova I.G., Kal'vo-Dal'berg M., Dal'berg U. Vliyanie termicheskoy obrabotki iskhodnogo rasplava na strukturu i svoystva kristallicheskikh slitkov ili otlivok [Influence of Heat Treatment of Initial Melt on Structure and Properties of Crystal Ingots and Castings]. Melts, 2020. no. 1. Pp. 1–34.

Gavrilin I.V. Osnovy modeli mikroneodnorodnogo stroeniya zhidkikh metallov [Base of model of microgeterogeneous structure of liquid metals]. Povyshenie kachestva otlivok i slitkov [Increasing of Alloys and Ingots Quality]. Gorky, GPI Publ., 1979, no. 2, p. 5.

Gavrilin I.V. Plavlenie i kristallizatsiya metallov i splavov [Melting and Crystallization of Metals and Alloys]. Vladimir, VGU Publ., 2000. 260 p.

Tyagunov G.V., Baryshev E.E., Vandysheva I.V., Zaytseva N.A., Khomenko A.O. Struktura i svoystva zhidkogo zheleza [Structure and Properties of Liquid Iron]. Bulletin of the South Ural State University. Series «Metallurgy», 2019, vol. 19, no. 3, pp. 13–23.

Rassolov S.G., Sviridova E.A., Maksimov V.V. et al. Thermal Stability, Kinetics, and Mechanism of Decomposition of Nanocomposite Structure in Alloys Base on Aluminium. Metallofizika i Noveishie Tekhnologii. 2015, vol. 37, no. 8, pp. 1089–1111.

Baryshev E.E., Tyagunov A.G., Stepanova N.N. Vliyanie struktury rasplava na svoystva zharoprochnykh nikelevykh splavov v tverdom sostoyanii [Influence of Melt Structure on Properties of Heat resistant Nickel Alloys in Solid State]. Ekaterinburg, UrO RAN Publ., 2010. 199 p.

Tyagunov G.V., Baryshev E.E., Tsepelev V.S. et al. Metallicheskie zhidkosti. Stali i splavy [Metal Liquids. Steels and Alloys]. Ekaterinburg, UrFU Publ., 2016. 358 p.

Tyagunov G.V. et al. Sposob otsenki ravnovesnosti metallicheskikh rasplavov [The way to estimation of equilibrium of metal melts]. Patent RF, no. 2680984, 2019.

Valiev, R.Z., Korznikov, A.V., Mulyukov, R.R. Structure and properties of metallic materials with submicrocrystalline structure. Physics of Metals and Metallography, 1992, vol. 73, no. 4, pp. 70–86.

Nazarov A.A., Romanov A.E., Valiev R.Z. On the nature of high internal stresses in ultrafine grained materials. Nanostruct. Mater., 1994, vol. 4, no. 1, pp. 93–102.

Gertsman V.Yu., Birringer R., Valiev R.Z., Gleiter H. On the structure and strength of ultrafinegrained copper produced by severe plastic deformation. Scripta Metall. Mater., 1994, vol. 30, no. 2, pp. 229–234.

Neiman G.V., Weertman J.R., Siegel R.W. Mechanical behaviour of nanocristalline Cu and Pd. J. Mater. Res., 1991, vol. 6, no. 5, pp. 1012–1027.

Alexandrov I.V., Valiev R.Z. X-ray pattern simulation in textured nanostructured copper. Nanostruct. Mater., 1995, vol. 6, no. 5–8, pp. 763–766.

Gusev A.I. Nanomaterialy, nanostruktury, nanotekhnologii [Nanomaterials, nanostructures, nanotechnologies]. Moscow, Fizmatlit Publ., 2009. 416 p.

Christian J.W. Teoriya prevrashcheniy v metallakh i splavakh [Theory of Transformations in Metals and Alloys.]. Moscow, Mir, 1978. 806 p.

Mudry S., Kulyk Y., Kotur B., Kovbuz M., Hertsyk O. Themperatures changes of structure in Al18Ni8Y5 amorphous alloy. Archives of Materials Science, 2004. vol. 25, no. 4, pp. 373–378.

Shubnikov A.V. Kak rastut kristally [How Crystals Grow]. Moscow; Leningrad : AN SSSR Publ., 1935. 175 p.

Johnson R.A. Empirical potentials and their use in calculation of point defects in metals. J. Phys. F. : Metall. Phys. 1973, vol. 3, no. 32, pp. 295–321.

Downloads

Published

2020-11-21

Issue

Vol. 20 No. 2 (2020)

Section

Physical Metallurgy and Heat Treatment