Porosity in Metal Deposited by Brkmts3-1 Open Arc Wire

Authors

  • A. M. Osipov South Ural State University
  • P. A. Norin South Ural State University

Keywords:

porosity, surfacing, open arc

Abstract

The paper presents data on formation of pores in metal during surfacing by manual and mechanized open arc welding with the BrKMts3-1 grade wire. Dependence of preheating of parts on the quantity of pores in weld metal is determined. It is established that formation of pores in welding of copper and its alloys is connected with hydrogen and oxygen. Equilibrium concentrations of oxygen and hydrogen in liquid metal (bronze) at temperature Т = 1473 K are defined.

References

Гуревич, С.М. Справочник по сварке цветных металлов / С.М. Гуревич. – Киев: Наукова думка, 1981. – 508 с.

Теоретические основы сварки / под ред. В.В. Фролова. – М.: Высш. шк., 1967. – 598 с.

Фром, Е. Газы и углерод в металлах / Е. Фром, Т.Е. Гебхард. – М.: Металлургия, 1980. – 230 с

Downloads

Issue

No. 15 (2012): Issue 18

Section

The Journal’s Scope