Theoretical basis of the study of the workpiece deformation process without changing shape and size
DOI:
https://doi.org/10.14529/met150413Keywords:
equal channel angular pressing, slip lines, damage, fracture, rational deformation regimes, Deform-3D, recrystallization, polygonization, ultrafine microstructureAbstract
An important task of modern metal production is the development and introduction of new technological processes of pressure working, combining a slight change in shape and dimensions of the workpiece with intensive deformation. These requirements are met by the process of equal channel angular pressing (ECAP). The analysis was made of the impact of technological regimes of equal channel angular pressing on the shape of the deformation zone, strain rate intensity, the degree of accumulated deformation, indicators of stress and damage in metal with ideal plastic properties and power-law hardening. Mechanics of equal channel angular pressing is examined by the use of methods of slip lines and the upper estimate, and damage calculation is based on the of ductile fracture mechanics in plastic metal working. Regularities of the ECAP process management and rational modes of deformation are found. The facts obtained were confirmed by the results achieved in the ECAP simulation process in the software package Deform-3D. The work shows new areas of the research of equal channel angular pressing, related to grain refinement and the study of the process of metal destruction. In particular, adjusting the strain rate of the process and controlling the temperature, it is possible to provide conditions under which the workpiece material is fully polygonized, new centers of recrystallization are formed, recrystallization processes of the unprepared metal structure (primary recrystallisation) are suppressed and conditions for grain refinement and obtaining the ultrafine metal structure are generated. The computer experiment carried out with the help of the software package Deform-3D confirms with sufficient accuracy the theoretical study of the ECAP.
References
Пластическая обработка металлов простым сдвигом / В.М. Сегал, В.И. Резников, А.Е. Дробышевский, В.И. Копылов // Металлы. – 1981. – № 1. – С. 115–123.
Логинов, Ю.Н. Оценка неравномерности деформаций и давлений при угловом прессовании / Ю.Н. Логинов, С.П. Буркин // Кузнечно-штамповочное производство. Обработка материалов давлением. – 2001. – № 3. – С. 29–34.
Valiev, R.Z. Principles of Equal Channel Angular Pressing As a Processing Tool for Grain Refinement / R.Z. Valiev, T.G. Langdon // Progress in Materials Science. – 2006. – Vol. 51, iss. 7. – P. 881–981.
Рааб, Г.И. Равноканальное угловое прессование длинномерных заготовок / Г.И. Рааб, Р.З. Валиев // Цветная металлургия. – 2000. – № 5. – С. 50–53.
Nagasekgar, A.V. Analysis of T-Shaped Equal Channel Angular Pressing Using the Finite Element Method / A.V. Nagasekgar, H.S. Kim // Metals and Materials International. – 2008. – Vol. 14, no. 5. – P. 565–568.
Son, I.H. Finite Element Investigations of Friction Condition in Equal Channel Angular Extrusion / I.H. Son, Y.G. Jin, Y.T. Im // Journal of Achievements in Materials and Manufacturing Engineering. – 2006. – Vol. 17, no. 1–2. – P. 285–288.
Rusz, S. Increasing SPD Effectiveness by Changing Deformation Process in the First Pass Through the ECAP Die / S. Rusz, K. Malanik, M. Klos // Journal of Achievements in Materials and Manufacturing Engineering. – 2007. – Vol. 23, no. 2. – P. 79–82.
Maciejewski, J. Finite Element Analysis of Strain Non-Uniformity in Two Processes of Severe Plastic Deformation / J. Maciejewski, H. Kopeć, H. Petryk // Engineering Transactions. – 2007. – Vol. 55, no. 3. – P. 197–216.
Kim, H.S. Prediction of Temperature Rise in Equal Channel Angular Pressing / H.S. Kim // Material Transactions. – 2001. – Vol. 42, no. 3. – P. 536–538.
Process Modelling of Equal Channel Angular Pressing for Ultrafine Grained Material / H.S. Kim, P. Quang, M.H. Seo et al. // Materials Transactions. – 2004. – Vol. 45, no. 7. – P. 2172–2176.
Процессы пластического и структурообразования металлов / В.М. Сегал, В.И. Резников, В.И. Копылов [и др.]. – Минск: Наука и техника, 1994. – 232 с.
Богатов, А.А. Механические свойства и методы разрушения металлов: учеб. пособие для вузов / А.А. Богатов. – Екатеринбург: ГОУ ВПО УГТУ – УПИ, 2002. – 329 с.
Вайнблат, Ю.М. Диаграммы структурных состояний и карты структур алюминиевых сплавов / Ю.М. Вайнблат // Металлы. – 1982. – № 2. – С. 82–88.
Вайнблат, Ю.М. Диаграммы структурных состояний и рекристаллизации горячедеформированного сплава АК4-1 / Ю.М. Вайнблат, С.Ю. Клепачевская, П.Ш. Ланцман // Физика металлов и металловедение. – 1977. – Т. 44, вып. 4. – 834 с.
Колмогоров, В.Л. Напряжения, деформации, разрушение / В.Л. Колмогоров. – М.: Металлургия, 1970. – 229 с.
Богатов, А.А. Механика деформирования и разрушения металла при равноканальном угловом прессовании в условиях плоской деформации / А.А. Богатов, И.В. Лещев // Технология производства металлов и вторичных материалов. – Темиртау, 2011.
Богатов, А.А. Ресурс пластичности при обработке металлов давлением / А.А. Богатов, О.И. Мижирицкий, С.В. Смирнов. – М.: Металлургия, 1984. – 102 с.
