CONSOLIDATION MODEL OF POWDER MAGNETIC MATERIALS

Authors

  • L. A. Barkov South Ural State University, Chelyabinsk
  • M. N. Samodurova South Ural State University, Chelyabinsk
  • Yu. S. Latfulina South Ural State University, Chelyabinsk

DOI:

https://doi.org/10.14529/met180106

Keywords:

powder, magnetic materials, mathematical model, die, density, velocity, equation of motion

Abstract

Known models of deformation processes of powder materials in a die compaction are based on a decision of partial differential equilibrium equations. This paper presents the mathematical model of the die powder compaction process which is based on the decision of partial differential equations of motion. The equations for an elastic-plastic isotropic powder hardening material are used as rheological ones. A quasi-continuous powder medium has an irreversible volumetric and shear deformation. Numerical calculations of the die compaction are fulfilled for ferrite, Sm–Co, Nd–Fe–B magnets using Lagrange’s method by means of the difference scheme of continuous calculation of Wilkins’ type. Boundary conditions are assigned by a friction low on lateral surfaces of the die. Pressed articles have the form of rings.

References

Nikolaevskiy V.N., Basniev K.S., Gorbunov A.T., Zotov G.A. Mekhanika nasyshchennykh poristykh sred [Saturated Porous Material Mechanics]. Moskow, Nedra Publ., 1970. 339 p.

Lyakhov G.M. Volny v gruntakh i poristykh mnogokomponentnykh sredakh [Waves in Grounds and Porous Multi Component Mediums]. Moscow, Nauka Publ., 1982. 286 p.

Shtern M.B., Serdyuk G.G., Maksimenko L.A. et al. Fenomenologicheskie teorii pressovaniya poroshkov [Phenomenological Theories of Pressing Powders]. Kiev, Naukova Dumka, 1982. 139 p.

Shima S., Oyane M. Plasticity theory for porous metals. International Journal of Mechanical Sciences, 1976, vol. 18, iss. 6, pp. 285–291. DOI: 10.1016/0020-7403(76)90030-8

Sokolov L.N., Laptev D.N., Malyuskiy V.L. [Theory of Plasticity of Porous Bodies and Its Application to Calculations of Hydrostatic Treatment of Powders and Sintered Materials]. Fizika i tekhnika vysokikh davleniy [Physics and Engineering for High Pressures], 1983, iss. 11, pp. 38–41.

Wilkins M.L. Calculations of Elastic-Plastic Flow. Methods in Computational Physics. Vol. 3. Numerical Methods in Hydrodynamics. Alder B., Fernbach S., Rotenberg M. (Eds.). New York and London, Academic Press, 1964, pp. 211–264.

Published

2018-05-22

Issue

Section

Physical Chemistry and Physics of Metallurgical Systems