COMPARING THE EFFICIENCY OF AIR-COOLED HEAT EXCHANGERS FOR BOTTOM ELECTRODES OF DC ARC FURNACES
DOI:
https://doi.org/10.14529/met180415Keywords:
DC arc furnace, bottom electrode, air cooling, heat exchanger, ring fins, straight fins, pin fins, simulation, heat flow, thermal efficiency, recommendationsAbstract
Bottom electrode is a basic component of a DC arc furnace; located on the bottom axis, it supplies electric current to the charge or to the liquid metal. Some designs feature dual bottom electrodes displaced from the bottom axis to improve the efficiency of mixing the melt at the bottom. Bottom electrodes are water-cooled. One of the significant drawbacks of DC arc furnaces is the risk of explosions that may be caused by the interaction of molten metal and water in case of emergency, when metal exits the furnace via the bottom. An alternative option for rod electrodes consists in forced electrode cooling by placing an air-cooled heat exchanger on the copper portion of the electrode; such heat exchanger is a finned surface. The paper dwells upon such designs where bottom electrodes are cooled by ring fins, straight fins, or pin fins. The fin cross-section may be of different profiles: rectangular, trapezoid, hyperbolic, triangular, etc. Computer simulation for each heatexchanger type has produced temperature distribution over the fin vertical, thermal power dissipated by the fin (or pin), fin efficiency and mass as a function of its geometry. Analysis confirms the possibility of altering the design of rod electrodes by switching from water-based cooling to air cooling, which is especially applicable to DC arc furnaces under 10 tons. Comparison of different air-cooled heat-exchanger designs that pin fins and ring fins are advantageous in terms of heat dissipation and material intensity.References
Malinovskiy V.S., Yarnykh L.V., Afonaskin A.V. [New Generation of DC Arc Furnaces for Metallurgical and Foundry Production]. Trudy VII kongressa staleplavil’shchikov [Proceedings of the VII Congress of Steelmakers]. Moscow, Chermetinformatsiya Publ., 2003, pp. 70–77. (in Russ.)
Yachikov I.M., Karandayeva O.I., Larina T.P. Modelirovaniye elektrovikhrevykh techeniy v vanne dugovoy pechi postoyannogo toka [Simulation of the Electrically Vortex Flows in the Bath of a DC Arc Furnace]. Magnitogorsk, MGTU Publ., 2008. 234 p.
Pavlicevic M., Matijasevic B., Della Negra A., Gensini G. DC-EAF: The Anodes Cooling System. Danieli News, 1995, no. 1, pp. 18–29.
Zaytsev V.A., Medovar L.B. [Bottom Electrodes of DC Arc Furnaces]. Elektroshlakovaya tekhnologiya, 2009, no. 2, pp. 3–8. (in Russ.)
Zinurov Yu.I., Tuluyevskiy Yu.N., Lobanov V.S. et al. [Highly Reliable Hearth Electrode for DC Arc Furnaces]. Metallurgist, 1988, no. 6, pp. 48–49.
Malinovskiy V.S. [Energy Technology Capabilities of New-Generation DC Arc Furnaces]. Elektrometallurgiya, 2007, no. 7, pp. 8–14. (in Russ.)
Malinovskiy V.S. Podovyy elektrod elektropechi [Electric Furnace Bottom Electrode]. Patent RF no. 212187.
Pavlicevic M., Matijasevic B., Della Negra A., Gensini G. DC-EAF: The Anodes Cooling System. Danieli News, 1995, no. 1, pp. 18–29.
Tishchenko P.I., Timoshenko S.N., Pasechnik S.Yu. et al. [Bottom Electrode with Liquid Metal Coolant for DC Arc Furnace]. Nauchnyye trudy Donetskogo natsional’nogo tekhnicheskogo universiteta. Seriya: Metallurgiya [Scientific Works of Donetsk National Technical University. Ser. Metallurgy], 2011, iss. 13 (194), pp. 85–91. (in Russ.)
Yachikov I.M., Larina T.P. [Simulation of the Thermal State of the Bottom Electrode of a DC Arc Furnace during the Transition from Water to Air Cooling]. Stal’, 2014, no. 8, pp. 58–64. (in Russ.)
Yachikov M.I., Logunova O.S., Yachikov I.M. [The Use of Annular Ribs in the Design of the Bottom Electrode of a DC Arc Furnace with Air Cooling]. Materialy 71-y nauch.-tekhn. konferentsii “Aktual’nyye problemy sovremennoy nauki, tekhniki i obrazovaniya” [Materials of the 71st Scientific and Technical Conference “Actual Problems of Modern Science, Technology and Education”]. Magnitogorsk, MGTU Publ., 2013, vol. 2, pp. 89–93. (in Russ.)
Mironets I.E., Yachikov I.M. [Comparison of the Efficiency of the Heat Sink Ring and Direct Air Cooling Fins]. Aktual’nyye problemy sovremennoy nauki, tekhniki i obrazovaniya, 2014, vol. 2, no. 1, pp. 181–185. (in Russ.)
Yachikov I.M., Volgin E.L., Vdovin K.N., Feoktistov N.A. [Simulation of the Heat Work of the Spikes in the Form of Spikes in the Design of the Bottom Electrode of a DC Arc Furnace with Air Cooling]. Matematicheskoye i programmnoye obespecheniye sistem v promyshlennoy i sotsial’noy sferakh, 2015, no. 1, pp. 20–26. (in Russ.)
Royzen L.I., Dul’kin I.N.; Fastovskiy V.G. (Ed.) Teplovoy raschet orebrennykh poverkhnostey [Thermal Design of Finned Surfaces]. Moscow, Energiya Publ., 1977. 256 p.
Fangyuan Liu, Junkui Mao, Xingsi Han, and Wei Gu. Heat Transfer of Impinging Jet Arrays on a Ribbed Surface. Journal of Thermophysics and Heat Transfer, 2018, vol. 32, no. 3, pp. 669–679. DOI: 10.2514/1.T5288
Yachikov I.M., Volgin E.L. Raschet teplovykh parametrov radiatora vozdushnogo okhlazhdeniya s rebrami v vide shipov [Calculation of Thermal Parameters of the Air-Cooled Radiator with Spikes in the Form of Spikes]. Patent RF no. 2018615117, 2018.
