CONTROL SYSTEM OF TEMPERATURE MUFFLE FURNACE WITH ADAPTIVE TEMPERATURE CONTROLLER
DOI:
https://doi.org/10.14529/met190110Keywords:
adjustment, emulator, adaptation, electric furnace resistance, temperatureAbstract
The article presents a model of the adaptive temperature control system of the muffle electric resistance furnace (ERF) of the MP-2UM type, implemented in the MATLAB software environment. The basis of the system model is the electric furnace unit, developed using data obtained from the experiment conducted on the operating semi-industrial ERF type MP2-UM, as well as using linear models of objects and discrete active identification. The model includes input of the initial data of the heat treatment process and the processed metal using the temperature control unit of the furnace, calculation of the temperature of the heated metal using the readings of the effective temperature of the furnace determined by the thermocouple and the temperature of the pyrometer, simulation
of graphs of the temperature change inside the furnace chamber and the graph of the change of
the transmission coefficient of the PID controller settings, thereby solving the problem of optimal control of the thermal modes of the electric furnace according to the selected criteria and the problem of information support., allowing the technologist to more accurately carry out the heat treatment process, providing him with additional information that is not available for direct measurement. The work of the created model of the system is considered on the example of annealing a rod of technical titanium alloy grade VT0-1, widely used in the manufacture of various products that meet the stringent performance requirements. This model can also be used to train personnel of enterprises of the industrial metallurgical complex in order to improve their skills and level of professional training, as well as in the educational process for higher education institutions.
References
Lisienko V.G., Volkov V.V., Goncharov A.L. Matematicheskoye modelirovaniye teploobmena v pechakh i agregatakh [Mathematical Modeling of Heat Exchange in Furnaces and Units]. Kiev, Naukova dumka Publ., 1984. 232 p.
Karpov K. A. Osobennosti primeneniya trenazherov i komp’yuternogo modelirovaniya na pred-priyatiyakh neftegazokhimicheskogo kompleksa [Features of Application of Simulators and Computer Simulation at the Enterprises of Petrochemical Complex]. St. Petersburg, Publishing House of St. Petersburg State Economic University, 2013. 75 p.
Vorontsov E.Y., Lisienko V.G., Ponomarev N.N. Ustroystvo adaptatsii regulyatora temperatury elektricheskoy pechi soprotivleniya [Adaption Device of Electric Resistance Furnace Temperature Con-troller]. Patent RF, no. 121606, 2012.
Dyakonov V., Kruglov V. Analiz, identifikatsiya i modelirovaniye sistem [Analysis, Identification and Modelling of Systems]. St. Petersburg, Piter Publ., 2002. 448 p.
Dyakonov V.P. [Simulink: Tutorial]. Moscow, DMK Press Publ., 2013. 784 p.
Dyakonov V.P. Spravochnik po primeneniyu sistemy PC MatLAB [Guide to Application of the System PC MatLAB]. Moscow, Fizmatlit Publ., 1993. 112 p.
Alekseev E.P., Chesnokova O.V. Resheniye zadach vychislitel’noy matematiki v paketakh Math-cad 12, MATLAB 7, Maple 9 [The Solution of Problems of Computational Mathematics Packages Such as Mathcad 12, MATLAB 7, Maple 9]. Moscow, NT Press Publ., 2006. 496 p.
Abkowitz S., Burke J., Hiltz R. Titanium in Industry: Technology of Structural Titanium. Van Nostrand, 1955.
Chesnokov Yu.N., Gusev, O.A., Mukhanov V.V. (Ed.) [Design of Regulatory Systems to the PC]. Ekaterinburg, USTU Publ., 1999. 108 p.
Samokhotskiy A.I., Parfenovskaya N.G. Tekhnologiya termicheskoy obrabotki metallov [The Technology of Thermal Treatment of Metals]. 2th ed. Moscow, Mashinostroyeniye Publ. 1976.
Krivandin V.A., Belousov V.V., Sborshchikov G. S., et al. Teplotekhnika metallurgicheskogo proizvodstva. V 2 t. T. 2: Konstruktsiya i rabota pechey [Heat Engineering of Metallurgical Production. Vol. 2: Construction and Operation of Furnaces]. Moscow, MISIS Publ., 2001. 736 p.
Guillermo J. Silva, Aniruddha Datta, S.P. Bhattacharyya. PID Controllers for Time-Delay Sys-tems. Boston, 2005. DOI: 10.1007/b138796
Lisienko V.G., Volkov V.V., Malikov K.Y. Uluchsheniye toplivoispol’zovaniya i upravleniye teploobmenom v metallurgicheskikh pechakh [Improvement of Fuel Consumption and Management of Heat Transfer in Metallurgical Furnaces]. Moscow, Metallurgy Publ., 1988. 231 p.
Smetana A.Z. [Automatic and Automated Tuning of Controllers of Thermal Power Processes]. Heat Power Engineering, 2004, no. 11, pp. 47–52. (in Russ.)
O’Dwyer A. PID Compensation of Time Delayed Processes 1998–2002: a Survey. Procee¬dings of the American Control Conference, 4–6 June 2003. Vol. 2, pp. 1494–1499. DOI: 10.1109/ACC.2003.1239802
