DYNAMIC FEATURES OF FUNCTIONING OF THE PLUG MILL OF THE PIPE-ROLLED UNIT
DOI:
https://doi.org/10.14529/met190206Keywords:
working stand, plug mill, pipe, support nodes, vibroactivity, dynamics, mass, rigidity, oscillations, center of mass, mechanical system, fracturingAbstract
The results of the study of the refined mathematical dynamic model of the working stand of the plug mill of the pipe-rolling unit (TPA) are presented. The spatial coordinate system in the center of mass of the working stand is selected and the initial dynamic model of the mechanical system is transformed into a simplified mechanical system of rigid bodies, which are interconnected in a cer-tain way in the supporting nodes by elastic elements. The spatial position of the mechanical system in the process of oscillation of the working stand of the plug mill is represented by the corresponding coordinates in the selected reference system. Taking into account certain initial and boundary condi-tions, the task is presented in the formulation of the problem of the dynamics of a mechanical sys-tem. Assuming that the legs of the bed and the pedestals (tires) that hold the working stand of the plug mill on the support mechanisms are deformed, the kinetic and potential energies of the sys-tem are determined for a simplified mechanical system with four degrees of freedom. The differen-tial equations of the movement of the working stand and the units of the mechanism of holding the bed on the support nodes of the pipe-roled unit were compiled using the Lagrange equation of the second kind. Pictures of the vibroactivity of the elements of the working stand and supporting units of the mechanism for holding the mechanical system with four degrees of freedom are ob-tained. A numerical solution of the system of differential equations is given, and by the example of calculating the dynamics of the working stand of the plug mill TPA-350, the features of the function-ing of the mechanical system with four degrees of freedom are established. The parameters of the dy-namism of the working stand of the plug mill and the mechanism of its retention on the reference planes, affecting the difference wall thickness of the rolled shells, are established. A scheme has been proposed to modernize the mechanism for holding the working stand of an plag mill TPA-350.
References
Soloveychik P.M. Truboprokatnyye agregaty s avtomat-stanom [Pipe-Rolling Units with Plug Mill]. Moscow, Metallurgiya Publ., 1967. 160 p.
Danchenko V.N., Kolikov A.P., Romantsev B.A., Samusev S.V. Tekhnologiya trubnogo proiz-vodstva. [Pipe Production Technology]. Moscow, Intermet Publ., 2002. 640 p.
Ivanchenko F.K., Polukhin P.I., Tylkin M.A., Polukhin V.P. Dinamika i prochnost’ prokatnogo oborudovaniya. [Dynamics and Strength of Rolling Equipment]. Moscow, Metallurgiya Publ., 1970. 486 p.
Adamiya R.Sh. Optimizatsiya nagruzok prokatnykh stanov. [Optimization of Rolling Mill Loads]. Moscow, Metallurgiya Puubl., 1978. 232 p.
Mandel’shtam L.I. Lektsii po teorii kolebaniy. [Lectures on the Vibration Theory]. Moscow, Nauka Publ., 1972. 470 p.
Kozhevnikov S.N. Dinamika nestatsionarnykh protsessov v mashinakh. [Dynamics of Non-Stationary Processes in Machines]. Kiev, Naukova dumka Publ., 1986. 286 p.
Panovko Ya.G. Osnovy prikladnoy teorii uprugikh kolebaniy. [Fundamentals of the Applied Theory of Elastic Vibrations]. Moscow; Leningrad, GNTI Publ., 1957. 546 p.
Vyshinskiy V.T. [Research and Features of Simplifying Dynamic Models of Row Mechanical Chains]. Teoriya i praktika metallurgii [Theory and Practice of Metallurgy], 1999, no. 6, pp. 35–37. (in Russ.)
Kozhevnikov S.N. Dinamika nestatsionarnykh protsessov v mashinakh. [Dynamics of Non-Stationary Processes in Machines]. Kiev, Naukova dumka Publ., 1986. 288 p.
Rakhmanov S.R., Lyubin N.V. [Dynamics of the Working Stand of the Plug Mill Tube-Rolling Unit]. Vibratsiya v tekhnike i tekhnologiyakh [Vibrations in Technics and Technologies], 2016, no. 1 (81), p. 105–112. (in Russ.)
Vyshinskiy V.T., Povorotniy V.V, Mokiyevets A.V. [Dynamic Model of the Working Stand of the Finishing Group of a Continuous Thin-Sheet Mill]. Plasticheskaya deformatsiya metallov. Т. 2 [Plas-tic Deformation of Metals. Vol. 2]. Dnepropetrovsk, Aktsent PP Publ., 2014, pp. 61–66. (in Russ.)
Rakhmanov S.R., Azimov A.A. [Comprehensive Study of the Dynamics of the Plug Mill Tube-Rolling Unit]. Materialy Mezhdunarodnoy nauchno-tekhnicheskoy konferentsii “Intellektual’nyye tekhnologii v mashinostroyenii” [Materials of the International Scientific and Technical Conference “In-telligent Technologies in Mechanical Engineering”]. Baku, 2017, pp. 386–395. (in Russ.)
Rakhmanov S.R., Azimov A.A. [Comprehensive Study of the Dynamics of the Plug Mill Tube-Rolling Unit]. Mashinovedeniye [Machine Science], 2016, vol. 5, no. 2, pp. 39–47. (in Russ.)
Rakhmanov S.R., Khatskelyan I.P., Garmashov D.Yu. [Investigation of the Dynamics of Tran-sients in the Plug Mill Tube-Rolling Unit]. Plasticheskaya deformatsiya metallov [Plastic Deformation of Metals]. Dnepr, 2017, pp. 203–209. (in Russ.)
Tekhnicheskiy otchot monitoringa prostranstvennogo polozheniya kleti v protsesse eksplua¬tatsii s registratsiyey dinamicheskikh smeshcheniy i uglov otkloneniya kleti avtomatstana TPA 350. [Technical Report on the Monitoring of the Spatial Position of the Stand during Operation with the Registration of Dynamic Displacements and Deviations of the Stand of the Plug Mill TPA-350]. Nikopol’, 2018. 287 p.
