No. 15 (2012): Issue 18

The Journal’s Scope

• Processes of Strength Formation of Molding and Core Sand Mixtures

  E. G. Antoshkina, V. A. Smolko

  • PDF (Русский)

• On Formation of Adhesive Contacts in Synthetic Sand Mixtures

  V. A. Smolko, E. G. Antoshkina

  • PDF (Русский)

• Analysis of Physical and Chemical processes of Structure Formation of Liquid Glass Molding and Core Mixtures in Dispensable Mold Casting

  V. G. Gurlev

  • PDF (Русский)

• Porosity in Metal Deposited by Brkmts3-1 Open Arc Wire

  A. M. Osipov, P. A. Norin

  • PDF (Русский)

• Probabilistic-Statistical Model of Defect-Free Welded Joint

  A. K. Tingaev, R. G. Gubaidulin, P. A. Norin

  • PDF (Русский)

• Problems of the Avalanche Destructions of Welded Pipelines and Methods of Their Prevention

  V. A. Lupin, Yu. I. Pashkov, M. A. Ivanov

  • PDF (Русский)

• Residual Welding Stresses and Ways to Reduce Stress-Corrosive Destruction of Trunk Gas Pipelines

  Yu. I. Pashkov, M. A. Ivanov, R. G. Gubaidulin

  • PDF (Русский)

• Stressed State of Welded Joints of Tubular Units Without Gusset Plate

  R. G. Gubaidulin, A. K. Tingaev, V. A. Lupin

  • PDF (Русский)

• Development of Classifier of Defects for Welded Pipes

  Yu. I. Pashkov, V. A. Lupin, M. A. Ivanov

  • PDF (Русский)

• Theoretical Basics of Computer-Assisted Engineering of High-Temperature Nickel Casting Alloys

  A. A. Ganeev, E. F. Shaikhutdinova, B. A. Kulakov, A. I. Mezentseva

  • PDF (Русский)

• Thermodynamic Properties of Vanadium Nitride

  V. I. Shishkov, V. M. Zhikharev

  • PDF (Русский)

• Thermodynamic Analysis of the Iron–Chromium–Nickel–Nitrogen System

  B. I. Leonovich, Yu. S. Kuznetsov, E. A. Trofimov

  • PDF (Русский)

• System Analysis of Iron Oxide Reduction in Water Gas Atmosphere in the Presence of Carbon

  G. P. Vyatkin, G. G. Mikhailov, Yu. S. Kuznetsov, O. I. Kachurina

  • PDF (Русский)

• Thermodynamic Analysis of Phase Equilibria in Chromium Steels Deoxidized with Manganese and Zirconium

  L. A. Makrovets, G. G. Mikhailov, D. A. Vydrin

  • PDF (Русский)

• Thermodynamic Analysis of Phase Equilibria in the NI–AL–С–O and NI–CA–С–O Systems Under the Condition of Existence of Nickel Melt

  E. A. Trofimov

  • PDF (Русский)

• Analysis of Phase Equilibria in the NI–SI–O and NI–SI–С–O Systems Under the Condition of Existence of Nickel Melt

  E. A. Trofimov

  • PDF (Русский)

• Research and Development of a Program for Thermodynamic Calculation of Chromium Reduction in ore-Thermal Furnace

  K. K. Kaskin

  • PDF (Русский)

• Continuous Remelting of Metallized Iron Ore Pellets in an Ore-Thermal Furnace For Obtaining The Semi-Product Material

  K. K. Kaskin

  • PDF (Русский)

• Gas Formation in Aluminothermal Smelting of Ferrotungsten

  I. Yu. Pashkeev, K. Yu. Pashkeev

  • PDF (Русский)

• Investigations of Sulfatizing Roasting Process of Rough Copper Concentrate from Pure Ore Of The Annensk Deposit

  K. Zh. Zhumashev, L. M. Karimova, A. B. Yun, T. E. Tokbulatov, E. T. Kairalapov, D. M. Zhiembaeva

  • PDF (Русский)

• Phase Transformations During Oxidizing Roasting of Copper Sulphide Smelting Slag

  A. A. Lykasov, A. N. Matonin, I. G. Verty, A. A. Kimyashov

  • PDF (Русский)

• Improving the Technology of Smelting Nickel-Based Heat-Resistant Alloys in an Open Arc Furnace Using Alloy Wastes

  B. V. Oschepkov, T. A. Zhiltsova

  • PDF (Русский)

• Influence of Tin Addition on the Cutting Process of Structural Steels

  M. S. Nikitin, A. V. Ryabov

  • PDF (Русский)

• Creep of Ultralight Magnesium Alloys at Low Temperatures

  S. I. Ilyin, Yu. D. Koryagin, I. V. Lapina

  • PDF (Русский)

• Softening of Cold-Worked Al–6%Mg Alloy by Fast Heating in the 100…300 °C Temperature Range

  Yu. D. Koryagin

  • PDF (Русский)

• Internal Stresses During Cooling of Large Forgings

  D. A. Mirzaev, A. D. Shaburov

  • PDF (Русский)

• Nucleation Site Saturation аnd Kinetic Parameters of Austenite-Ferrite Transformation in Fe–9%Cr Alloys

  K. Yu. Okishev

  • PDF (Русский)

• Mathematical Modeling of the Pressing Process of Pipes of Varying Section

  A. V. Vydrin, Ya. I. Kosmatsky, B. V. Barichko

  • PDF (Русский)

• Modeling of the Strain-Stress Distribution During High Stripe Sinking (Bilateral Metal Flow)

  A. V. Vydrin, A. V. Zinchenko, B. V. Barichko

  • PDF (Русский)

• Test Mill of Step-by-Step Rolling SShr-82.5

  G. I. Koval, V. G. Dremin

  • PDF (Русский)

• Experimental Research of the Step-By-Step Rolling in Forward and Reverse Motion

  G. I. Koval

  • PDF (Русский)

• The System Approach in Designing and Management of Roll Stock of Section Mills

  F. S. Dubinsky, A. V. Vydrin, I. N. Chernykh

  • PDF (Русский)