METHODS OF QUANTITATIVE MODELING FOR THE STRUCTURES OF ALKALINE BOROSILICATE SYSTEMS

Authors

  • Evgeniy A Trofimov Zlatoust branch of the South Ural State University, Russian Federation
  • Vyacheslav E Eremiashev Zlatoust branch of the South Ural State University, Russian Federation
  • Andrey N Anikeev Zlatoust branch of the South Ural State University, Russian Federation
  • Alina Yu Gabova Zlatoust branch of the South Ural State University, Russian Federation
  • Sergey N Alexandrovich Zlatoust branch of the South Ural State University, Russian Federation

Keywords:

borosilicate glass, structure, modeling

Abstract

On the basis of simple initial concepts the model for description of changes in the structure of hardening products for silicate, borate and borosilicate melts, qualitatively corresponding to the experimental data, has been arrived at. The presented set of equations describing the interaction between the structural units and the values of the constants adequately permits designing the structure of solid oxide alloys Na2O–SiO2, Na2O–B2O3; this method can be applied to Na2O–B2O3–SiO2 system description for any ratio [Na2O]/[B2O3].

Author Biographies

Evgeniy A Trofimov, Zlatoust branch of the South Ural State University, Russian Federation

кандидат химических наук, доцент кафедры общей металлургии

Vyacheslav E Eremiashev, Zlatoust branch of the South Ural State University, Russian Federation

доктор химических наук, заведующий кафедрой физики

Andrey N Anikeev, Zlatoust branch of the South Ural State University, Russian Federation

старший преподаватель кафедры общей металлургии

Alina Yu Gabova, Zlatoust branch of the South Ural State University, Russian Federation

студент факультета техники и технологии

Sergey N Alexandrovich, Zlatoust branch of the South Ural State University, Russian Federation

студент факультета техники и технологии

References

Du, L.-S. Solid-state NMR study of metastable immiscibility in alkali borosilicate glasses / L.-S. Du, J.F. J. Stebbins // Non-Cryst. Solids. – 2003. – V. 315. – P. 239–255.

Manara, D. Advances in understanding the structure of borosilicate glasses: A Raman spectroscopy study / D. Manara, A. Grandjean, D.R. Neuville // American Mineralogist. – 2009. – V. 94, № 5–6. – P. 777–784.

Еремяшев, В.Е. Влияние параметров R и K на особенности анионной структуры щелочных боросиликатных стекол / В.Е. Еремяшев, Л.А. Шабунина // Вестник ЮУрГУ. Серия «Химия». – 2011. – № 6 (33). – С. 68–72.

Еремяшев, В.Е. Изучение влияния замещения катиона натрия катионами щелочноземельных металлов на структуру боросиликатных стекол / В.Е. Еремяшев, А.А. Осипов, Л.М. Осипова // Стекло и керамика. – 2011. – № 7. – С. 3–6.

Effects of the Iron Content and Redox State on the Structure of Sodium Borosilicate Glasses: A Raman, Mossbauer and Boron K-Edge XANES Spectroscopy Study / B. Cochain, D.R. Neuville, G.S. Henderson et al. // Journal of the American Ceramic Society. – 2012. – V. 95, № 3. – P. 962–971.

The thermodynamic modelling of glass properties: A practical proposition / N.M. Vedishcheva, B.A. Shakhmatkin, M.M. Shultz et al. // J. Non-Crystalline Solids. – 1996. – V. 196. – P. 239–243.

Malfait, W.J. Quantitative Raman spectroscopy: Speciation of Na-silicate glasses and melts / W.J. Malfait, V.P. Zakaznova-Herzog, W.E. Halter // American Mineralogist. – 2008. – V. 93. – P. 1505–1518.

Structural investigation of sodium borate glasses and melts by Raman spectroscopy. II. Conversion between BO4 and BO2O units at high temperature / Y. Tetsuji, K. Noboru, S. Shuichi et al. // J. Non-Crystalline Solids. – 2003. – V. 321. – P. 147–156.

Published

2013-10-28

Issue

Section

Physical chemistry