Expert Option and Assessment of an Innovation Project in the Technology Park

J. F. Mammadov, N. Talibov, T. Tagiyeva

Abstract


On the basis of application of the step-by-step scheme for solving the problem, an algorithm for managing innovative projects in the scientific-manufacture center of the technology park at a higher educational institution is proposed. For expert analysis, search and selection of the best innovative project, mathematical support is offered. With the help of the algorithmic and mathematical model, a program of automated analysis, selection and assessment of an innovative project for its further manufacture release in the technological park has been developed.


Keywords


innovation; project; management; manufacture center; software

References


Кунву Ли. Основы САПР CAD/CAM/CAE / Кунву Ли. – СПб.: Питер, 2004. – 560 c.

Мамедов, Дж.Ф. Разработка структуры интерфейса программного обеспечения комплексного автоматизированного проектирования технических систем / Дж.Ф. Мамедов // Вестник компьютерных и информационных технологий. – 2013. – № 5 (107). – С. 18–21.

Хализаев, В.Н. Математическая модель принятия решений системного интегрирования в условиях множественного выбора альтернатив / В.Н. Хализаев, Д.В. Угрюмов // Политематический сетевой электронный научный журнал Кубанского государственного аграрного университета. – 2015. – № 112. – С. 24–31.

Урсаки, В.К. Модели выбора инвестиционных проектов в условиях неопределенности и риска / В.К. Урсаки // Вестник Новгородского государственного университета им. Ярослава Мудрого. – 2013. – № 74, т. 1. – С. 66–69.




DOI: http://dx.doi.org/10.14529/ctcr170418

Refbacks

  • There are currently no refbacks.