Using the simulation of a hybrid stand heat Center for collective use in energy and energy saving SUSU modes for combination of traditional and alternative energy sources
Keywords:
simulation setting, modeling, thermal-hydraulic conditions, engineering systemsAbstract
The article concerns the description of the simulation setup for imitation of hybrid heating systems which belongs to SUSU Center of collective use. The setup is used for training of specialist in the field of alternative energy and energy saving. As an alternative sources of energy the setup is apply the solar energy, low potential energy of ambient air, and also it has the regenerative system , which recycles energy of deferented air from the room . As an imitation of the traditional sources of thermal energy the setup uses two electric boilers. The setup allows you to imitate different combinations of traditional and alternative sources within existing heat generators worked on renewable energy; determine the contribution of each source of alternative energy in sustaining of heat stress, including heat and hot water ; explore the work of alternative sources of energy in the climatic conditions of the South Urals , and determine the feasibility and advisability of widespread implementation of such systems in Russian conditions.References
Паспорт ENBRA «Учебная автоматизированная имитационная установка полунатурного моделирования теплогидравлических режимов инженерных систем» / ENBRA, Чешская Республика.
Солнечный коллектор «ENBRA» Solar 300. – http://www.enbra.cz/cs/produkty/solarni-systemy.
Насосная группа cолярной системы «Grundfos» Solar 25-60. – http://ru.grundfos.com/documentation/catalogues.html.
Тепловой насос «Rotex HPSU Hitemp». – http://www.rotex-heating.com/products/heat-pump.html.
Бак-аккумулятор косвенного нагрева «Regulus» R2BC 300. – http://www.regulus.eu/ru/r2bc-300-storage-water-heater-300-litres-2-heating-coils.
Бак-аккумулятор «Regulus» RSWF 300. – http://www.regulus.eu/ru/nbc-300-300-l-stainlesssteel-storage-water-heater-with-1-heating-coil.
Установка рекуперации «ELEKTRODESIGN» CADS-DC 16 EH BP D. – http://www.elektrodesign.cz/web/en/product/cads-dc-16-v-bp-heat-recovery-unit.
Паспорт «Honeywell» VC6012MF6000. – http://honeywell.com/Pages/Home.aspx.
Тепловой насос, блок наружный «ROTEX» RRRQ016AY1. – http://www.rotex-heating.com/products/heat-pump.html.
Регулятор солярной системы «Regulator DC22». – http://www.ekotrend.sk/download_subory/dc12_dc22.pdf.






