Computer technology of medical implants by layer laser sintering

Authors

  • Mikhail Mikhailovich Tverskoy South Ural State University
  • Lina Nikolaevna Petrova South Ural State University
  • Alexander Sergeevich Aladin Chelyabinsk Regional Clinic Oncologic Dispensary
  • Elena Yurievna Sulatskaya South Ural State University
  • Anna Sergeevna Zharinova South Ural State University

Keywords:

implants, computed tomography, virtual model, prototyping, SLS-technique, selective laser sintering, reconstructive and plastic surgery

Abstract

The technology of computer-aided manufacturing of figurine-shaped implants using individual topographic anatomic data of the patient and the further production of powders of titanium implants by selective laser sintering process under computer control are described in the article.

Author Biographies

Mikhail Mikhailovich Tverskoy, South Ural State University

Doctor of Science (Engineering), Professor, Honored Worker of Science and Technology of the Russian Federation, Head of Mechanical Assembly Production Automation Department

Lina Nikolaevna Petrova, South Ural State University

enior lecturer of Mechanical Assembly Production Automation Department

Alexander Sergeevich Aladin, Chelyabinsk Regional Clinic Oncologic Dispensary

Candidate of Science (Medicine), Head of Oncology Department IV (head and neck tumors)

Elena Yurievna Sulatskaya, South Ural State University

engineer of Mechanical Assembly Production Automation Department

Anna Sergeevna Zharinova, South Ural State University

post-graduate student of Mechanical Assembly Production Automation Department

References

Реконструктивные операции при опухолях головы и шеи / под ред. проф. Е.Г. Матякина. – М.: Изд-во «Вердана», 2009. – 224 с.

www.conmet.ru

Зленко, М. Технология быстрого прототипирования – послойный синтез физической копии на основе 3D-CAD-модели / М. Зленко // CAD/CAM/CAE Observer. – 2003. – № 2 (11). – С. 2–9.

www.laser.ru/science/scien21_01.html

Компьютерное биомоделирование и лазерная стереолитография / А.В. Евсеев, С.В. Камаев, Е.В. Коцюба и др. // Современные лазерно-информационные и лазерные технологии: сб. тр. ИПЛИТ РАН. – М.: Интерконтакт Наука, 2005. – С. 119–130.

Закономерности взаимодействия пористых имплантатов из никелида титана с биологическими тканями / А.Н. Вусик, В.Н. Ходоренко, Г.Ц. Дамбаев, И.В. Суходоло // Биосовместимые материалы и имплантаты с памятью формы. – Northampton; Томск: STT, 2001. – С. 171–175.

Downloads

Published

2014-03-18

Issue

№23 (282), issue 16

Section

The main