Determination of Shaft Rotation Angle from Accelerations of the Wireless Sensor by the Novel Numerical Method
DOI:
https://doi.org/10.14529/ctcr180315Keywords:
angular acceleration, rotating shaft, wireless sensor, numerical method, regularization method, inverse problemAbstract
The scheduled maintenance allows us to prevent breakdowns and unplanned downtime of equipment but limits the flexibility of manufacturing systems. On the other hand, condition monitoring concept enhances the manufacturing systems flexibility but requires reliable diagnostic information in real-time. Modern technologies, e.g., wireless power and Industrial Internet of Things (IIoT), allow implementing high-sensitivity sensors such as the Wireless Acceleration Sensor (WAS) for condition monitoring. The WAS is mounted on a machinery rotating shaft and the WAS measures angular, linear accelerations and angle of the shaft simultaneously. Moreover, the WAS contains a high-performance microcontroller, which allows processing measured data and estimating machinery condition in real-time. However, the accuracy of the angle measurement by the WAS significantly affects the accuracy of linear accelerations measurement by the WAS. In this paper, the authors propose the novel numerical method which allows us to measure accurately of a rotation angle and linear accelerations of the shaft. The method is based on a regularization technique and application of finite-difference equations. Besides, the study shows the results of simulation at applying the numerical method to calculate the rotation angle of the shaft using measurement data, which contain noise, obtained from the wireless accelerations sensor. The simulation results show that the numerical method effectively determines the rotating angle and the method is robust to noise.
References
Asynchronous Input Gear Damage Diagnosis Using Time Averaging and Wavelet Filtering / M.A. Jafarizadeh, R. Hassannejad, M.M. Ettefagh, S. Chitsaz // Mech. Syst. Signal Process. – 2008. – Vol. 22. – P. 172–201. DOI: 10.1016/j.ymssp.2007.06.006
Feldman, M. Hilbert Transform in Vibration Analysis / M. Feldman // Mech. Syst. Signal Process. – 2011. – Vol. 25 (3). – P. 735–802. DOI: 10.1016/j.ymssp.2010.07.018
Ahamed, N. Spur Gear Tooth Root Crack Detection Using Time Synchronous Averaging under Fluctuating Speed / N. Ahamed, Y. Pandya, A. Parey // Measurement. – 2014. – Vol. 52. – P. 1–11. DOI: 10.1016/j.measurement.2014.02.029
Amarnath, M. Local Fault Detection in Helical Gears via Vibration and Acoustic Signals Using EMD Based Statistical Parameter Analysis / M. Amarnath, I.R. Praveen Krishna // Measurement. – 2014. – Vol. 58. – P. 154–164. DOI: 10.1016/j.measurement.2014.08.015
A Gear Fault Diagnosis Using Hilbert Spectrum Based on MODWPT and a Comparison with EMD Approach / Yang Yu, He Yigang, Cheng Junsheng, Yu Dejie // Measurement. – 2009. – Vol. 42. – P. 542–551. DOI: 10.1016/j.measurement.2008.09.011
A Wireless MEMS-Based Inclinometer Sensor Node for Structural Health Monitoring / D. Ha, H. Park, S. Choi, Y. Kim // Sensors. – 2013. – Vol. 13 (12). – P. 16090–16104. DOI: 10.3390/s131216090
Kavitha, S. High Performance MEMS Accelerometers for Concrete SHM Applications and Comparison with COTS Accelerometers / S. Kavitha, R.J. Daniel, K. Sumangala // Mech. Syst. Signal Process. – 2016. – Vol. 66. – P. 410–424. DOI: 10.1016/j.ymssp.2015.06.005
Wireless Health Monitoring System for Vibration Detection of Induction Motors / S. Korkua, H. Jain, W.J. Lee, C. Kwan // 2010 IEEE Industiral and Commercial Power Systems Technical Conf. – Conf. Record (Tallahassee, FL, USA). – 2010. – P. 1–6. DOI: 10.1109/icps.2010.5489899
An Availability of MEMS-Based Accelerometers and Current Sensors in Machinery Fault Diagnosis / J. Son, B. Ahn, J. Ha, B. Choi // Measurement. – 2016. – Vol. 94. – P. 680–691.
Патент на полезную модель 142934 Российская Федерация, МПК7 G 01 P 15/02, G 01 H 9/00. Устройство измерения виброускорения подвижных элементов машин и механизмов / В.В. Синицин, В.В. Синицин, А.С. Семенов, А.Л. Шестаков; заявитель и патентообладатель ФГБОУ ВПО «ЮУрГУ» (НИУ). – № 2014109714/28; заявл. 12.03.2014; опубл. 10.07.2014, Бюл. № 19.
Chinchalkar, S. Determination of Crack Location in Beams Using Natural Frequencies / S. Chinchalkar // Journal of Sound and Vibration. – 2001. – Vol. 247, iss. 3. – P. 417–429. DOI: 10.1006/jsvi.2001.3748
Vibration-Based Inverse Algorithms for Detection of Delamination in Composites / Z. Zhang, K. Shankar, T. Ray et al. // Composite Structures. – 2013. – Vol. 102. – P. 226–236. DOI: 10.1016/j.compstruct.2013.03.012
Jang, T.S. A New Method for Detecting Non-linear Damping and Restoring Forces in NonLinear Oscillation Systems from Transient Data / T.S. Jang, S. Choi Hang, S.L. Han // International Journal of Non-Linear Mechanics. – 2009. – Vol. 44, iss. 7. – P. 801–808. DOI: 10.1016/j.ijnonlinmec.2009.05.001
A Novel Application of Radial Basis Functions for Solving a Model of First-Order IntegroOrdinary Differential Equation / K. Parand, S. Abbasbandy, S. Kazem, J.A. Rad // Communications in Nonlinear Science and Numerical Simulation. – 2011. – Vol. 16, iss. 11. – P. 4250–4258. DOI: 10.1016/j.cnsns.2011.02.020
Sinitsin, V.V. Wireless Acceleration Sensor of Moving Elements for Condition Monitoring of Mechanisms / V.V. Sinitsin, A.L. Shestakov // Meas. Sci. Technol. – 2017. – Vol. 28, no. 9. – P. 1–8. DOI: 10.1088/1361-6501/aa7ab6
Yaparova, N.M. Method for Temperature Measuring Inside a Cylindrical Body Based on Surface Measurements / N.M. Yaparova, A.L. Shestakov // 14th IMEKO TC10 Workshop Technical Diagnostics, Italy. – 2016. – P. 8–12.
