Calculation of residual stresses from burnishing taking repeated deformations into account
Keywords:
Residual stresses, Burnishing, Repeated deformationsAbstract
The article substantiates the necessity of taking repeated deformation into account during the technological operation of burnishing (deforming broaching), and the experimental distributions of the residual stresses during burnishing are presented. In order for designers to have the right to set residual stress requirements on drawings, technologists must be able to form them and, therefore, model them. A simulation of residual stresses in a hollow thick–walled cylinder during burnishing which takes into account secondary deformations and re–deformation is presented and areas with plastic loading and elastic unloading or elastic loading and elastic unloading are examined. Examples of modeling residual stresses and the results of the calculated determination of the circumferential residual stresses in a hollow cylinder according to mathematical models are given; recommendations are given in this connection on the appointment of a number of burnishing rings on the burnishing tool; it is shown that two are sufficient to form the necessary distribution of residual stresses in the surface layer, and a third ring provides roughness. The features of distribution of circumferential compressive residual stresses in the areas of secondary and repeated deformations are considered; repeated deformations appear in the near–surface layer adjacent to the treated surface, i.e. the residual stresses from the repeated deformation are superimposed on the secondary residual stresses. Detailed conclusions on the effect on residual stresses in the near–surface layer of pressure changes (interference) during burnishing, the changes in the wall thickness of the cylinder, and changes in the yield strengthReferences
. Kudryavtsev I.V. Vnutrenniye napryazheniya kak rezerv prochnosti v mashinostroyenii [Internal Stresses as a Safety Margin in Mechanical Engineering]. Moscow, Mashgiz, 1951, 277 p.
Golenkov V.A., Radchenko S.Yu., Dorokhov D.O., Gryadunov I.M. [Analysis of the Types of Hardening Treatment by Plastic Deformation]. Fundamental and Applied Problems of Technics and technology. 2011. no. 1(285). pp. 59–62 (in Russ)
Golenkov V.A., Radchenko S.Yu., Dorokhov D.O., Gryadunov I.M. [On the Issue of Improving the Operational Characteristics of Hollow Axisymmetric Machine Parts by Methods of Intensive Plastic Deformation] Fundamental and Applied Problems of Technics and technology. 2012. no. 6 (296). pp. 71-77. (in Russ)
Karatushin S.I., Spiridonov D.V., Pleshanova Yu.A. [Residual stresses in cylindrical products]. Metal Science and Heat Treatment. 2013. No. 6. Pp. 53–56. (in Russ)
Chernyshev G.N., Popov A.L., Kozintsev V.M., Ponomarev I.I. Ostatochnyye napryazheniya v deformiruyemykh tverdykh telakh [Residual Stresses in Deformable Solids]. Moscow, Science, 1996, 240 p.
Rosenberg O.A., Tsekhanov Yu.A., Sheikin S.E. Tekhnologicheskaya mekhanika deformiruyushchego protyagivaniya [Technological Mechanics of Deforming Pulling]. Voronezh. VGTA Publ., 2001. 203 p.
Kuznetsov V.A., Timofeeva T.D. [Improving the Efficiency of Deforming Pulling due to the Geometry of the Tool]. Materialy mezhdunarodnoy nauchno-tekhnicheskoy konferentsii AAI «Avtomobile- i traktorostroyeniye v Rossii: prioritety razvitiya i podgotovka kadrov», posvyashchennoy 145-letiyu MGTU «MAMI» [Materials of the International Scientific and Technical Conference of the Automobile and Automotive Engineering and Tractor Engineering in Russia: Development Priorities and Personnel Training, dedicated to the 145th anniversary of MSTU MAMI], 2010.
Smirnov-Alyaev G.A., Chikidovsky V.P. Eksperimental'nyye issledovaniya v obrabotke metallov davleniyem [Experimental Studies in the Processing of Metals by Pressure]. Leningrad, Mashinostroyeniye. 1972. Pp. 211–242
Sheikin S.E., Paschenko E.A., Rostotsky I.Yu., Gavrilova V.S., Protsishin V.T. Process Lubricant for Deforming Broaching of Pieces Made of Titanium. Metallurgical and Mining Industry, 2014. vol. 6(2). pp. 56–66
Rozenberg O.A., Novikov N.V., Shejkin S.Ye, Firstov S., Podrezov Yu., Danylenko M. Forming of a Gradient Nanostructure on a Surface of Details by the Method of Plastic Deformation. Metallophysics and Advanced Technologies. 2004. vol. 26. pp. 1493-1500.
Birger I.A. Ostatochnyye napryazheniya [Residual stresses]. Moscow. Mashgiz, 1983. 232 p.
Pozdnyakova I.V. [Wear resistance and residual stresses during burnishing]. Trudy soveshchaniya po uprochneniyu detaley mashin. Moskva. Nauka [Proceedings of the meeting on hardening machine parts. Moscow. The Science], 1965. Pp.142–150.
Proskuryakov Yu.G. Dornovaniye otverstiy [Hole Burning]. Moscow. Mashgiz, 1961. 192 p.
Tovpenets E.S., Sakharov P.S. Ostatochnyye tangentsial'nyye napryazheniya v polykh stal'nykh tsilindrakh, naklepannykh iznutri [Residual Tangential Stresses in Hollow Steel Cylinders Riveted from the Inside]. Metallurgy, 1936, no. 2. pp. 36–42.
Proskuryakov Yu.G., Pozdnyakova I.V. [Residual Stresses in Burnished Parts]. Sovremennyye sposoby i tekhnologii obrabotki detaley uprochnyayushcheye-kalibruyushchimi instrumentami. Chelyabinsk. CHPI [Modern Methods and Technologies for Processing Parts Reinforcing-Calibrating Tools. Chelyabinsk. CPI], 1961. Pp. 37–48.
Proskuryakov Yu.G. [Residual Stresses and Accuracy of Burnished Parts]. Bulletin of mechanical engineering.1973. No. 7. Pp. 58–60. (in Russ)
Mazein P.G. Modelirovaniye formirovaniya ostatochnykh napryazheniy i deformatsiy pri poverkhnostnom plasticheskom deformirovanii stal'nykh detaley dissertatsiya na soiskaniye uchenoy stepeni doktora tekhnicheskikh nauk. [Modeling of the Formation of Residual Stresses and Strains During Surface Plastic Deformation of Steel Parts the Dissertation for the Degree of Doctor of Technical Sciences] Chelyabinsk. ChPI, 1994. 413 p.
Moskvitin V.V. Uprugo–plasticheskaya deformatsiya tel pri povtornykh nagruzheniyakh avtoreferat dis. na soiskaniye uchenoy stepeni doktora fiziko-matematicheskikh nauk [Elastic-Plastic Deformation of Bodies Under Repeated Loading Abstract for the Degree of Doctor of Physical and Mathematical Sciences]. Moscow. Institute of Mechanics Acad. USSR sciences, 1960. 15 p.
Moskvitin V.V. Plastichnost' pri peremennykh nagruzheniyakh [Plasticity under Variable Loads]. Moscow State University Publ. 1965. 263 p.
Klink U., Flores G. Honen von Kleinstbohrungen. Werkzeug–Technologie.
, vol.37, no. l, pp. 26–32.
Okhotin I., Skvortsov V. Burnishing of Deep Holes of Small Diameter with Large Strains. LAP Lambert Academic Publishing, 2011, 180 p.
De Swardt R. R. Finite Element Simulation of the Sachs Boring Method of
Measuring Residual Stresses In Thick–Walled Cylinders. Journal of pressure vessel technology. 2003, vol. 125, no. 3, pp. 274–276.
Ekmekci B., Tekkaya A. E., Erden A. A Semi–Empirical Approach for Residual Stresses in Electric Discharge Machining (EDM). International Journal of Machine Tools and Manufacture.2006, vol 46, no. 7, pp. 858–868.
Koc M., Culp J., Altan T. Prediction of Residual Stresses in Quenched Aluminum Blocks and Their Reduction Through Cold Working Processes. Journal of Materials Processing Technology. 2006, vol. 174, no. 1, pp. 342–354.
Lai M.O., He Z. Residual Stress Field of Ballised Holes. Journal of Mechanical Science and Technology. 2012, vol. 26, no 5, pp. 1555– 1565. DOI: 10.1007/s12206-012-0326-6
Parker, A. P. A Critical Examination of Sachs’ Material–Removal Method for Determination of Residual Stress. Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2003, pp. 1–4.
Rossini N.S., Dassisti M., Benyounis K.Y., Olabi A.G. Methods of Measuring Residual Stresses in Components. Materials & Design. 2012, vol.35, pp. 572–588.
