Improving performance thread turning cutters with ceramic plates
Keywords:
hardened workpiece, carving, ceramic plate, durability, performanceAbstract
Despite many well-developed processes of high-pressure forming threads on the detailsof mass production, in some cases it is necessary to cut the thread cutter. Such cases include threading on thin-walled workpieces or high hardness, threading an asymmetrical structure.
Leading companies are developing tools and release for these cases special threaded plate and allowed the program to calculate the cutting conditions and cutting allowance scheme depending on the pitch, and the hardness of the workpiece. Usually the threaded insert is made of cemented carbide, often with a hardening coatings. Profile feature of threaded plates is a small radius of curvature peaks associated with a step size of thread cutting. This leads to high mechanical and thermal loads to the top of the threaded plate and forces to provide reasonable resistance to reduce the cutting conditions: speed, speed associated with the workpiece, and the supply infeed per stroke. Recently, a plate of mineral ceramics based on alumina doped refractory metal carbides. These plates have a high heat resistance that allows you to increase the cutting speed. However, in the literature there is practically no information on the use of mineral ceramics plates for threading highly durable blanks. The paper presents the results of experiments on thread cutting with ceramic plates on steel billets of high hardness (HRC 52...55). Shows the effect of a negative rake angle, the values of penetration and cutter infeed into components of the cutting force. It is proved that the optimization of geometrical parameters of plates enables high-performance threaded onto the hardened workpieces made of high-strength materials, which, combined with a lower cost material plates
promises significant economic benefits.
References
Astakhov V.P., Shvets S.V. Interaction Between Deformation and Thermal Waves in Metal Cutting. Int. J. of Advances in Machining and Forming Operations, 2010, vol. 2, рр. 1–18.
Kishawy H.A., Hosseini A., Moetakef-Imani B., Astakhov V.P. An Energy Based Analysis of Broaching Operation: Cutting Forces and Resultant Surface Integrity. CIRP Annals – Manufacturing Technology, 2012, vol. 61, iss. 1, pp. 107–110.
Abushawashi Y., Xiao X., Astakhov V.P. FEM Simulation of Metal Cutting Using a New Approach to Model Chip Formation. Int. J. Advances in Machining and Forming Operations, 2011, vol. 3, pp. 71–92.
Astakhov V.P. Machinability: Existing and Advanced Concepts. Chapter 1: Machinability of Advanced Materials. Ed. by J.P. Davim. Waley, 2014, London, pp. 1–56.
Astakhov V.P. A Treatise on Material Characterization in the Metal Cutting Process. Part 2: Cutting as the Fracture of Workpiece Material. Journal of Materials Processing Technology, 1999, vol. 96 (1–3), pp. 34–41.
Astakhov V.P. On the Inadequacy of the Single-Shear Plane Model of Chip Formation. International Journal of Mechanical Sciences, 2005, vol. 47, pp. 1649–1672.
Atkins A.G. Modelling Metal Cutting Using Modern Ductile Fracture Mechanics: Quantitative Explanations for Some Longstanding Problems. International Journal of Mechanical Science, 2003, vol. 43, рp. 373–396.
Bai Y., Wierzbicki T. A New Model of Metal Plasticity and Fracture with Pressure and Lode Dependence. International Journal of Plasticity, 2008, vol. 24, no. 0749–6419, pp. 1071–1096.
Didjanin L., Kovac P. Fracture Mechanisms in Chip Formation Processes. Materials Science and Technology, 1997, vol. 13, рp. 439–444.
Guo Y.B., Yen D.W. Study of Discontinuous Chip Formation in Had Machining. Journal of Materials Processing Technology, 2004, vol. 155–156, pp. 1350–1356.
Vargus. Catalog Lathe Threading Tool. http://www.its77.ru/katalogi-proizvoditelej/vargusinstrument-rezbona eznoj/vargus.html.
Иванов В.В., Сорокин Е.В., Павлова Е.В. Сравнение режущих свойств керамики различных марок. СТИН. 2007. № 8. С. 39–40. [Ivanov V.V., Sorokin E.V., Pavlova E.V. (Comparison of Cutting Properties of Ceramics of Different Brands). STIN, 2007, no. 8, pp. 39–40. (in Russ.)]
Денисов В.Г., Федин Е.И., Ямников А.С. Влияние геометрии резьбовых резцов с режущей керамикой на точность профиля резьбы и силы резания. Сб. науч. тр. «Исследования в области технологии механической обработки и сборки». Тула, ТПИ, 1985. С. 69–75. [Denisov V.G., Fedin E.I., Yamnikov A.S. (The Influence of the Geometry of the Cutting Tools with Threaded Ceramic Accuracy Thread and Cutting Force). Sb. Scientific. Tr. “Research in the Field of Technology Machining and Assembly”. 1985, Tula, TPI, pp. 69–75. (in Russ.)]
Duan C.Z., Dou T., Wang M. Research on Influence of Material Hardness and Cutting Conditions on Serrated Chip Formation Process during High Speed Machining of AISI 1045 Hardened Steel. Computer Engineering and Technology (ICCET), AMAE Int. J. on Production and Industrial Engineering,
June 2011, vol. 02, no. 01, 2nd. рр. 321–324.
Hill R. The Mechanics of Machining: a New Approach. Journal of the Mechanics and Physics of Solids, 1954, vol. 3, pp. 47–53.
Astakhov V.P., Xiao X. A Methodology for Practical Cutting Force Evaluation Based on the Energy Spent in the Cutting System. Machining Science and Technology, 2008, vol. 12, pp. 325–347.
Elices M., Guinea G.V., Gomez J., Planas J. The Cohesive Zone Model: Advantages, Limitations and Challenges. Engineering Fracture Mechanics, 2002, vol. 69, pp. 137–163.
Merchant M.E. Mechanics of the Metal Cutting Process. II. Plasticity Conditions in Orthogonal Cutting. Journal of Applied Physics, 1945, vol. 16, pp. 318–324.
Бобров В.Ф. Многопроходное нарезание крепежных резьб резцом. М., Машиностроение, 1982. 104 с. [Bobrov V.F. Multipass Cutting Mounting Thread Cutter. Moscow, Mashinostroenie, 1982. 104 p. (in Russ.)]
Ye G.G., Xue S.F., Ma W., Jiang M.Q., Ling Z., Tong X.H., Dai L.H. Cutting AISI 1045 Steel at Very High Speeds. International Journal of Machine Tools and Manufacture, 2012, vol. 56, pp. 1–9.
Abukhshim N.A., Mativenga P.T., Sheikh M.A. Heat Generation and Temperature Prediction in Metal Cutting: A Review and Implications for High Speed Machining. International Journal of Machine Tools and Manufacture, 2006, vol. 46, no. 0890–6955, pp. 782–800.
Huq M.Z., Celis J.P. Expressing Wear Rate in Sliding Contacts Based on Dissipated Energy. Wear, 2002, vol. 252, pp. 375–383.
Ivanov V.V., Chuprikov A.O. Improving Accuracy of Turning Thin-Walled Parts. Bulletin of Engineering, 2012, № 6, рр. 60–61.
Nabhani F. Wear Mechanisms of Ultra-Hard Cutting Tools Materials. Journal of Materials Processing Technology, 2001, vol. 115, no 3, рp. 402–412.
Luo S.Y., Liao Y.S., Tsai Y.Y. Wear Characteristics in Turning High Hardness Alloy Steel by Ceramic and CBN Tools. Journal of Materials Processing Technology, 1999, vol. 88, pp. 114–121.
D'Errico G.E., Bugliosi S., Calzavarini R., Cuppini D. Wear of Advanced Ceramics for Tool Materials. Wear, 1999, vol. 225–229, рp. 267–272.
Schulz H., Reuter U. Wear Mechanism for the High Speed Machining of CGI. Production Engineering, 2000, vol. VII/1, рр. 3–16.
Zhao J., Zhang J., Ai X. Relationship Between the Thermal Shock Behavior and Cutting Performance of a Functionally Gradient Ceramic Tool. Journal of Materials Processing Technology, 2002, vol. 129, iss.1–3, рp. 161–166.
Шарова Т.В., Гарасев Э.Ю., Шаров С.И. Анализ путей повышения эффективности лезвийной обработки деталей. Вестник Рыбинского гос. авиац. техн. ун-та им. П.А. Соловьева. 2014. № 2 (29). С. 57–64. [Sharova T.V., Garassev E.Y., Sharov S.I. Analysis of Approaches for Details Edge
Cutting Machining Effectiveness Enhancement. Bulletin of the Rybinsk State Aviation Technical University, P.A. Solovyov, 2014, no. 2 (29), рр. 57–64 (in Russ.)]
Волков Д.И., Проскуряков С.Л., Тарасов С.С. Применение инструмента из минералокерамики для окончательной высокоскоростной токарной обработки деталей из жаропрочных литейных сплавов. Вестник Рыбинского гос. авиац. техн. ун-та им. П.А. Соловьева. 2013. № 3 (26). С. 59–65. [Volkov D.I., Proskuriakov S.L., Tarasov S.S. Application Tool from High Mineral Ceramics for Final Turning Parts of Heat-Resistant Casting Alloys. Bulletin of the Rybinsk State Aviation Technical University, P.A. Solovyov, 2013, no. (26), рр. 59–65. (in Russ.)]
