The dynamics of changes in the shape of the surface during abrasive finishing of the precision planes
Keywords:
abrasive lapping, energy model, the hypothesis of Preston, force pressing, the transition processAbstract
This article describes the process of a flat abrasive lapping. Considered signs characterizingfinishing operation lapping flat surfaces. The processes occurring during lapping, such
as mechanical phenomena (microcutting, plastic deformation) and chemical phenomena
(formation of oxide films and adsorbed layers). Provides an overview of the most common
schemes surfaces forming in the process of lapping. The schemes are considered impulse
model, geometric model and energy model of surfaces forming. Based on the energy model and hypotheses Preston found rational law changes downforce during processing, which allows to stabilize the contact pressure and increase productivity. An exponential dependence of the
contour area for lapping various planes of the original form macrorelief. An experimental
verification of the assumptions and hypotheses Preston at abrasive lapping of samples bronze
brand O5С5S5 on flat circles CBN 40/28 50 M2-01 on machine “Raster 220”. It is found that
when the efforts change exponentially (similar to the law change the contour of the contact area with the abrasive lapping), process productivity increases of 2.5–3 times. Demonstrated that the change of the standard deviation σ of the roughness parameter Ra of the treated surface during lapping at a constant pressing force, at the beginning of processing (at time t = 1 min), almost two times higher than the standard deviation of the roughness at the same time at a variable force pressing.
References
Chistoserdov P.S. Otdelochno-abrazivnye metody obrabotki [Abrasive Finishing and Processing Methods]. Minsk, Vysshaya shkola Publ., 1983. 128 p.
Reznikov A.N. Abrazivnaya i almaznaya obrabotka materialov [Abrasive and Diamond Material Processing]. Moscow, Mashinostroenie Publ., 1977. 391 p.
Shal'nov V.A. Shlifovanie i polirovanie vysokoprochnykh materialov [Grinding and Polishing of High-Strength Materials]. Moscow, Mashinostroenie Publ., 1972. 272 p.
Chestnov A.L. Voprosy otdelochnoy obrabotki metallov [Questions of Finishing Processing of Metals]. Moscow, Akademiya nauk SSSR Publ., 1961. 111 p.
Kosmachev I.G., Dugin V.N., Nemtsev B.A. Otdelochnye operatsii v mashinostroenii [Finishing Operations in Mechanical Engineering]. Leningrad, Lenizdat Publ., 1985. 248 p.
Sanchez L.E.A., Jun N.Z.X., Fiocchi A.A. Surface Finishing of Flat Pieces When Submitted to Lapping Kinematics on Abrasive Disc Dressed under Several Overlap Factors. Precision Engineering, 2011, vol. 35, no. 2, pp. 355–363.
Tam H.Y., Cheng H.B., Wang Y.W. Removal Rate and Surface Roughness in the Lapping and Polishing of RB-SiC Optical Components. Journal of Materials Processing Technology, 2007, vol. 192–193, pp. 276–280.
Kremen' Z.I, Yur'ev V.G., Baboshkin A.F. Tekhnologiya shlifovaniya v mashinostroenii [Grinding Technology in Mechanical Engineering]. Sankt-Peterburg, Politekhnika Publ., 2007. 424 p.
Nekrasov V.P. Issledovanie protsessa rastrovoy dovodki i zakonomernostey formirovaniya ploskikh poverkhnostey. Dis. kand. tekhn. nauk [Research the Process of Scanning and Finishing Laws Governing the Formation of Flat Surfaces. Cand. Sci. Diss.]. Perm’, 1971. 178 p.
Zaytsev G.F. Analiz lineynykh impul'snykh sistem avtomaticheskogo regulirovaniya i upravleniya [The Analysis of Linear Impulsive Systems of Automatic Regulation and Control]. Kiev, Tekhnika Publ., 1967. 163 p.
Tikhonov V.I., Khimenko V.I. Vybrosy traektoriy sluchaynykh protsessov [The Emissions Trajectories of Random Processes]. Moscow, Nauka Publ., 1987. 304 p.
D'yachenko A.N., Aksel'rud I.D., Mel'nik V.P. [On the Development of a Mathematical Model of the Process of Finishing Holes Loose Abrasive]. Trudy TsNITA [Proceedings of the CNIT], 1980, no.16, pp. 58–64. (in Russ.).
Orlov P.N. Tekhnologicheskoe obespechenie kachestva detaley metodami dovodki [Technological Security of Quality Parts by Polishing]. Moscow, Mashinostroenie Publ., 1988. 384 p.
Kuznetsov S.M., Shevel'kova L.I. [Stabilized the Process of Forming a Flat Surface]. Formoobrazovanie opticheskikh poverkhnostey. Moscow, Oborongiz Publ., 1962, pp. 195–214. (in Russ.)
Zubakov V.G., Semibratov M.N., Shtandel' S.K. Tekhnologiya opticheskikh detaley [The Technology of Optical Components]. Moscow, Mashinostroenie Publ., 1978. 415 p.
Tsesnek L.S. Mekhanika i mikrofizika istiraniya poverkhnostey [Mechanics and Microphysics Wear Surfaces]. Moscow, Mashinostroenie Publ., 1979. 264 p.
Antsiferov V.N., Khanov A.M., Muratov K.R., Muratov R.A., Pepelyshev A.V. [Raster Processing Method Precision Surfaces]. Izvestiya Samarskogo nauchnogo tsentra Rossiyskoy akademii nauk, 2011, vol. 13. no. 1, pp. 512–519. (in Russ.)
Khanov A.M., Muratov R.A., Muratov K.R., Gashev E.A. Nanoroughness Produced by Systems with Raster Kinematics on Surfaces of Constant Curvature. Russian Engineering Research, 2010, vol. 30, no 5, pp. 528–529.
Khanov A.M., Muratov K.R., Gashev E.A., Muratov R.A. Kinematic potential of honing machines. Russian Engineering Research, 2011, vol. 31, no 6, pp. 607–609.
