Flat grinding of big bearing races end with the demanded quality of a surface
Keywords:
bearing race, quality of surface, axial deformation, admittance of flatness, grindingAbstract
Upon heat treatment, bearing races acquire a flatness deviation and a curvature at the end
face surfaces under the effect of residual temperature stresses. The curvature of the end faces
considerably complicates the grinding process, because the race is additionally deformed
under the effect of the magnetic field on the machine table.
The flat grinding with the periphery of a straight wheel of standards from steel of SHkh15
is probed.
Mathematical models resulted to the width of standard of constituents of cutting force,
g-ratio and roughness of the treated surface (parameter of Ra) got the method of complete
factor experiment of type 24, where 4 is a number of factors.
Algorithms and mathematical models are presented for determination of axial deformation
at grinding of big bearings races with initial deviations from flatness of end faces.
The shape of the end surfaces of the nonrigid races was analyzed with the example of the
outer races of a conical single-row roller bearing from ShKh15 steel.
The theory of small curvature bars is used for determination of maximal axial elastic deformations at the bending of race. Maximal axial elastic deformation of race at the bending of race is determined the method of More. The statistical uncertainty is expanded with the method of forces. The terms of providing of the required flatness tolerance of end surface are determined for bearing race, taking into account axial deformation of the race under the magnetic field effect on the machine table and the radial component of the grinding force.
Algorithm and method is presented for determination of optimum terms grinding of end
surface of bearing races, providing the receipt of the set requirements to quality of the treated surface (Ra, admittance of flatness, absence of grinder burns) at the maximum cutting efficiency of process.
References
Korotkov B.I., Korotkov S.B., Tyshkevich V.N., Orlov S.V. Issledovanie protsessov shlifovaniya vnutrennikh i naruzhnykh konusov detaley klassa kolets [Research of Processes of Grinding of Internal and External Cones of Details of a Class of Rings]. Volgograd, Volgograd St. Technical Univ.
Publ., 2007. 133 p.
Soler Y.I., Kazimirov D.Y. [The Strategy of the Flat Grinding of a Variable Rigidite]. Metalloobrabotka [Metal Working], 2006, no. 1, pp. 2–7. (in Russ.)
Kosilova A.G., Meshcheryakov R.K. (Eds.) Spravochnik tekhnologa-mashinostroitelya. Moscow, Mashinostroenie Publ., 1985, vol. 2, 496 p.
Nosenko V.A., Tyshkevich V.N., Orlov S.V. [Determination of the Allowed Values of the Vertical Making Force of Flat Grinding of Bearing Rings of Small Axial Rigidity]. Spravochnik. Inzhenernyy zhurnal, 2008, no. 4, pp. 24–32. (in Russ.)
Nosenko V.A., Tyshkevich V.N., Orlov S.V., Svetlichnaya V.B. [The Determination of Axial Displacements During Bearing End Face Grinding]. Problemy mashinostroeniya i nadezhnosti mashin, 2010, no. 2, pp. 70–74. (in Russ.)
Kopetskii A.A., Nosenko V.A., Tyshkevich V.N., Orlov S.V. [Influence of Elastic Deformations on Error of Form at Fixing and Treatment of Rings of Bearings]. Fundamental'nye i prikladnye problemy tekhniki i tekhnologii, 2012, no. 2/3 (292), pp. 103–107. (in Russ.)
Nosenko V.A., Tyshkevich V.N., Orlov S.V., Svetlichnaya V.B. The Determination of Axial Displacements During Bearing End Face Grinding. Journal of Machinery Manufacture and Reliability, 2010, vol. 39, issue 3, pp. 157–160.
Kopetskii A.A, Nosenko V.A., Tyshkevich V.N. Influence of Shift of Clamping Forces on Elastic Deformations of the Bearing Ring in a Jaw Gripper. Journal of Machinery Manufacture and Reliability, 2014, vol. 43, no. 1, pp. 55–59.
Nosenko V.A., Orlov S.V., Krutikova A.A. [Influence of the Modes of Processing and Hardness of the Circle on the Making Forces of Grinding of Bearing Steel]. Fundamental'nye i prikladnye problemy tekhniki i tekhnologii, 2011, no. 4/3 (288), pp. 94–99. (in Russ.)
Nosenko V.A., Orlov S.V., Krutikova A.A. [Development of Regression Mathematical Models of Components of Force of Grinding of ShH15 Steel]. Mashinostroenie i tekhnosfera XXI veka: sb. tr. XVIII mezhdunar. nauch.-tekhn. konf. (Sevastopol, 12–17 sept. 2011). Donetsk, 2011, vol. 2. pp. 255–259. (in Russ.)
Nosenko V.A., Orlov S.V., Krutikova A.A. [Influence of an Operating Time, Hardness of a Circle and the Modes on Radial and the Tangential Making Grinding Forces]. Tekhnologiya – 2011: sb. nauch. tr. XIV mezhdunar. nauch.-tekhn. konf. (Orel, 5–7 okt. 2011). Orel, Tekhnologicheskiy institut
im. N.N. Polikarpova FGBOU VPO “Gosuniversitet – UNPK” Publ., 2011, pp. 56–58. (in Russ.)
Orlov S.V., Tyshkevich V.N., Korotkov B.I., Nosenko V.A. [Method to Eliminate Incurving of Ring-Type Part Faces by Grinding]. Patent RF 2370354. no. 2008110458/02. decl. 18.03.08; publ. 20.10.09, Bul. no. 29. 3 р.
