Fatigue Tests of Materials and Structures Using Modern Equipment
Keywords:
fatigue tests of materials, fatigue tests of structures, equipment for testingAbstract
Currently, much attention is paid to improving of resource estimate accuracy created andupgraded structures working in conditions of vibration. To this end, methods of calculations
and tests are improving as well as equipment. As part of the development of modern hardware and software for testing, investigations were done for define fatigue properties of materials on the example of aluminum alloy AMg-6 and structures on the example of semirings of indigenous plain bearings of the crankshaft vehicles.
To study of characteristics of the fatigue resistance of materials was designed and manufactured equipment, which allows simultaneous testing of up to six flat samples with a large range of variation of cross-sectional dimensions. For testing of structures was designed special equipment that allows testing of two plain bearings at the same time with the ability to study fatigue characteristics of different sizes of samples.
Conducted special studies to monitor the loading conditions, the purpose of which is to
establish a relationships the movement of the table shaker and the level of stress in the danger zone of the sample. To determine these relationships the stress-strain state of the sample is calculated using the package ANSYS for materials. For bearings, these relationships were obtained experimentally: strain transducers mounted on samples, and conducted a series of calibration experiments under static loading.
Fatigue tests were carried out on an electrodynamic shaker LDS V780. The result is fatigue
characteristics of flat cantilevered alloy samples AMg-6 under bending, as well as halfrings
plain bearings under harmonic loading.
References
Belodedenko S.V. Prediction of damage and survivability elements of structures using models of damage accumulation. Industrial laboratory. Materials diagnostics, 2010, vol. 76, no. 1, pp. 49–52. (in Russ.)
Agamirov L.V., Agamirov V.L., Vestyak V.A. [Algorithm for estimating the parameters of the distribution function of the endurance limit at fatigue tests]. Vestnik moskovskogo aviatsionnogo institute, 2013, vol. 20, no. 5, pp. 105–110. (in Russ.)
Schijve J. Fatigue of Structures and Materials. New Delhi, CBS Publishers, 2009. 623 p.
Xiong J.J., Shenoi R.A. Fatigue and Fracture Reliability Engineering. London, Springer London, 2011. 214 p.
Radaj D., Vormwald M. Advanced Methods of Fatigue Assessment. London, Springer London, 2013. 490 p.
Liu Y., Mahadevan S. Probabilistic Fatigue Life Prediction of Multidirectional Composite Laminates. Composite Structures, 2005, vol. 69, no. 1, pp. 11–19.
Bulgakov A.A., Knoring S.D., Kryzhevich G.B., Shaposhnikov V.M. [Investigation of the fatigue strength of the new aluminum-magnesium alloy brands 1550M and 1565CHM]. Trudy TsNII im. akad. A.N. Krylova, 2014, no. 82, pp. 113–120. (in Russ.)
Semenova I.P., Salimgareeva G.Kh., Latysh V.V., Kunavin S.A., Valiev R.Z. [Investigation of the fatigue resistance of titanium ulta fine-grained structure]. Metallovedenie i termicheskaya obrabotka metallov, 2009, no. 2, pp. 34–39. (in Russ.)
Guo F., Fenga M., Nie D., Xu J., Bhuiyan Md. Sh., Mutoh Y. Fatigue Life Prediction of Sus 630 (H900) Steel under High Cycle Loading. Acta Mechanica Solida Sinica, 2013, vol. 26, no. 6, pp. 584–591.
Wua D., Li S.Q., Hong M., Chen R.S., Han E.H., Ke W. High Cycle Fatigue Behavior of the Forged Mg–7Gd–5Y–1Nd–0.5Zr Alloy. Journal of Magnesium and Alloys, 2014, vol. 2, no. 4, pp. 357–362.
Peng L.M., Fu P.H., Li Z.M., Yue H.Y., Li D.Y., Wang Y.X. High Cycle Fatigue Behaviors of Low Pressure Cast Mg–3Nd–0.2Zn–2Zr Alloys. Materials Science and Engineering: A, 2014, vol. 611, pp. 170–176.
GOST 25.502-79. Raschety i ispytaniya na prochnost' v mashinostroenii. Metody mekhanicheskikh ispytaniy metallov. Metody ispytaniy na ustalost' [State Standard 25.502-79. Strength analysis and testing in machine building. Methods of metals mechanical testing. Methods of fatigue testing].
Moscow, Standartinform Publ., 2005. 39 p.
Erpalov A.V., Uskov P.N., Mahnovich S.V. [The choice of rational parameters of samples for fatigue testing at cantilever bending]. Nauka YuUrGU: Materialy 65-y nauchnoy konferentsii. Sektsii tekhnicheskikh nauk [Science in the South Ural State University: Materials of the 65th Scientific Conference. Sections of Engineering]. Chelyabinsk, South Ural St. Univ. Publ., 2013, vol. 1, pp. 202–205. (in Russ.)
Shkolnik L.M. Metodika ustalostnykh ispytaniy [Methodic of fatigue tests]. Moscow, Metallurgiya Publ., 1978. 304 p.
Shefer L.A. Veroyatnostnye metody rascheta resursa i zapasov prochnosti nesushchikh elementov konstruktsiy transportnykh system [Probabilistic methods of calculation of resources and reserves of
strength bearing structural elements of transport systems]. Chelyabinsk, South Ural St. Univ. Publ., 2000. 250 p.
Faghidian S.A., Jozie A., Sheykhloo M.J., Shamsi A. A Novel Method for Analysis of Fatigue Life Measurements Based on Modified Shepard Method. International Journal of Fatigue, 2014, vol. 68, pp. 144–149.
Zhao Y.X. A Fatigue Reliability Analysis Method Including Super Long Life Regime. International Journal of Fatigue, 2012, vol. 35, no. 1, pp. 79–90.
Sun Q., Dui H.-N., Fan X.-L. A Statistically Consistent Fatigue Damage Model Based on Miner’s Rule. International Journal of Fatigue, 2014, vol. 69, pp. 16–21.
Shefer L.A. Vibroprochnost' konstruktsiy: uchebnoe posobie [Vibration strength of structures: schoolbook]. Chelyabinsk, South Ural St. Univ. Publ., 2009. 95 p.
GOST ISO 7905-4-99. Podshipniki skol'zheniya. Ustalost' podshipnikov skol'zheniya. Ispytaniya poluvkladyshey iz metallicheskogo mnogosloynogo podshipnikovogo materiala [State Standard 7905-4-99. Plain bearings. Bearing fatigue. Tests on haef-bearings of a metallic multilayer bearing material]. Moscow, Standartinform Publ., 1999. 8 p.
