Analysis of Structural Changes in the Parts Surface after Electrical Discharge Machining
Keywords:
electrical discharge machining, surface layer, microstructure, quality, electrode-tool.Abstract
In modern engineering EDM technology finds wide application. It was found that theprocesses accompanying electrical discharge machining, determined by physics of interaction of the material with concentrated energy flux initiated by spark discharge. Due to the fact that the surface layer of the workpiece material is subjected to intense thermal stresses on its surface to form secondary structures. Currently not fully explored the formation of secondary structures in materials with different physical and mechanical properties on the surface hardening by means of laser welding and hardening. Relevant is the question of conservation and hardened surface layers deposited their properties after processing them by wire-wire electric discharge cutting. It is proved that when machining hardened and weld surfaces is first necessary to ensure a minimum temperature heating parts. Excessive temperatures can reduce the received physical and mechanical properties of the hardened surface layer, which is not acceptable. The aim is to study the influence of modes PVEEO the occurrence of changes in the surface layer of machined parts. In this paper an experimental study of the processing of materials with different mechanical and physical properties. The features of the formation of the modified layer on the machined parts, depending on the cutting conditions. It is established that during the wire-wire electric discharge machining test specimens with increasing current on the treated surface is altered increasing the thickness of the surface layer, wherein the microhardness of the layer is not changed. It is shown that the formed layer does not affect the performance of the treated parts.
References
Ablyaz T., Khanov A., Hurmatullin O. Sovremennye podkhody k tekhnologii elektroerozionnoy obrabotki materialov [Modern Approaches to the Technology of Electrical Discharge Machining of Materials]. Perm, Perm National Research Polytechnic University Publ., 2012. 112 p.
Artamonov B., Volkov Y. Analiz modeley protsessov elektrokhimicheskoy i elektroerozionnoy obrabotki. Ch. 2: Modeli protsessov elektroerozionnoy obrabotki. Provolochnaya vyrezka [Analysis of Models of Processes of Electrochemical and Electrical Machining. Ch. 2: Models of Processes of EDM. Wire Cutting]. Moscow, 1991. 144 p.
Jurin A. Metody rascheta tekhnologicheskikh parametrov i elektrodov-instrumentov pri elektroerozionnoy obrabotke [Methods of Calculation of Technological Parameters and Tool Electrode in EDM Process. Diss. Kand. (Tech.)]. Tula, 2005. 132 p.
Kabaldin G., Sarilov M., Bilenko S. Povyshenie ustoychivosti protsessa elektroerozionnoy obrabotki i kachestva obrabotannoy poverkhnosti na osnove podkhodov iskusstvennogo intellekta [Improving the Sustainability of the Process of Electrical Discharge Machining and Quality of Treated Surface Based on Artificial Intelligence Approaches]. Komsomolsk-on-Amur, 2007. 191 p.
Losev V. Mnogofaktornoe planirovanie eksperimenta [Multi-Factorial Experiment Planning]. Perm, 1985. 28 p.
Serebrenitsky P. Sovremennye elektroerozionnye tekhnologii i oborudovanie [Electro-Technology and Modern Equipment]. St. Petersburg, Baltic State Technical University, 2007. 228 p.
Solomentsev Y., Mitrofanov V. Adaptivnoe upravlenie tekhnologicheskimi protsessami [Adaptive Control of Technological Processes]. Moscow, Mashinostroenie Publ., 1980. 536 p.
Skhirtladze A., Yarushin S. Tekhnologicheskie protsessy v mashinostroenii [Technological Processes in Mechanical Engineering]. Perm, Perm State Technical University, 2006. 496 p.
Syanov S. Tekhnologicheskoe obespechenie kachestva poverkhnostnogo sloya detaley pri elektroerozionnoy
obrabotke [Technological Support of Surface Layer Quality of Parts at EDM Processing. Diss. Kand. (Tech.)]. Bryansk, 2002. 166 p.
Foteev N. [Quality Control of Technological Surface Tooling at Electro Erosion Processing]. Electron material processing, 1994, no. 2, pp. 5–7. (in Russ.)
Dauw D., Sthioul H., Delpretti R., Tricarico C. Wire Analysis and Control for Precision EDM Cutting. Ann. CIRP, 1989, no. 38, iss. 1, pp. 191–194. DOI: 10.1016/S0007-8506(07)62682-1
Gibson I., Rosen D., Stucker B. Additive Manufacturing Technologies: Rapid Prototype into Direct Digital Manufacturing. New York: Springer. 2010. Ch. 9. DOI: 10.1007/978-1-4419-1120-9_14
Justin D., Stucker B. Improving Implants Using Laser-Based Metal Deposition Technologies. BONEZone. Spring, 2006, pp. 22–25.
Kinoshita N., Fukui M., Kimura Y. Study on Wire-EDM: in Process Measurement of Mechanical Behavior of Electrode-Wire. Ann. CIRP. 1984, no. 33, iss. 1, pp. 89–92. DOI: 10.1016/0007-8506(07)61386-9
Kunieda M., Takeshita S., Okumiya K. Study on Wire Electrode Temperature in WEDM. Proceedings of international Symposium for Electromachining – ISEM XII, 1998, pp. 151–161.
Liao Y., Huang J., Su H. A Study on the Machining-Parameters Optimization of Wire Electrical Discharge Machining. J. Mater. Process. Technol., 1997, vol. 71, pp. 487–493. DOI:
1016/S0924-0136(97)00117-9
Rajurkar K., Wang W. Thermal Modeling and On-Line Monitoring of Wire-EDM. J. Mater. Process. Technol., 1993, vol. 1–2, iss. 38, pp. 417–430. DOI: 10.1016/0924-0136(93)90214-Q
Scott D., Boyina S., Rajurkar K. Analysis and Optimization of Parameter Combination in Wire Electrical Discharge Machining. Int. J. Prod. Res., 1991, vol. 29, iss. 11, pp. 2189–2207. DOI:
1080/00207549108948078
Spedding T., Wang Z. Parametric Optimization and Surface Characterization of Wire Electrical Discharge Machining Process. Precis. Eng., 1997, vol. 20, iss. 1, pp. 5–15. DOI:
1016/S0141-6359(97)00003-2
Tarng Y., Ma S., Chung L. Determination of Optimal Cutting Parameters in Wire Electrical Discharge Machining. Int. J. Mach. Tools Manuf., 1995, vol. 35, iss. 129, pp. 1693–1701. DOI:
1016/0890-6955(95)00019-T
