FULL FACTORIAL MODELS OFDIMENSIONAL ACCURACY OF MULTI-TOOL MACHINING ON AUTOMATIC TURNING MACHINES
Keywords:
matrix model of accuracy, full factorial model, plane-parallel displacements, angular displacements, matrices of coordinate ductilities, matrices of angular ductilities, dissipation fieldsAbstract
The paper presents the current development of the design theory of multi-tool machining on automatic turning machines. The existing processing error models take into account only plane-parallel displacements of subsystems of the technological system along the coordinate axes in the Cartesian coordinate system X, Y, Z.
This approach to modeling the formation of machining errors is valid for the parts that have equal-order dimensions in all coordinate directions.
However, there are cases of machining parts with significantly different dimensions.
In these cases, a significant contribution to the machining error can be made by turning the workpiece, especially in the directions of the prevailing dimensions.
Therefore, these models have to take into account the angular movements of the workpiece exposed to the cutting forces. To this end, we developed a full factorial matrix model of distortion and dissipation field of multi-tool dual-carriage dimensioning.
These models take into account a complex characteristic of compliance of the technological system, i.e., apart from the elastic properties (plane-parallel displacements of technological subsystems, their angular displacements around the base points), they also take into account the setup parameters for which its ductility is considered.
Therefore, to form a complex characteristic of the subsystem ductility, we conducted experiments to determine the ductility of the subsystem in the technological system.
Actual matrix characteristics of ductility for a real machine make it possible to evaluate the practical applicability of the developed full-factorial matrix models of machining accuracy.
As a result, it can allow us to identify the degree of influence on the machining accuracy of a complex of technological factors, including the structure of multi-tool set-up, deformation properties of the subsystems in the technological system, and cutting modes.
References
Кошин А.А., Юсубов Н.Д. Элементы матричной теории точности многоинструментной обработки в пространственных наладках. Вестник машиностроения. 2013. №9. С. 13–17.
[Koshin A.A., Yusubov N.D. [Elements of matrix theory of multitool processing accuracy in threedimensional setups.]. Bulletin of Machine-Building, 2013, no. 9, pp. 13–17. (in Russ.)]
Yusubov N.D. Matrix Models of the Accuracy in Multitool Two-Support Setup. Russian Engineering Research, 2009, vol. 29, iss. 3, pp. 268–271. DOI: 10.3103/S1068798X09030125
Pimenov D.Y., Guzeev V.I., Koshin A.A. Elastic displacement of a technological system in face milling with tool wear. Russian Engineering Research, 2011, vol. 31, iss. 11, pp. 1105–1109. DOI:
3103/S1068798X11110219
Guzeev V.I., Pimenov D.Y. Cutting force in face milling with tool wear. Russian Engineering Research, 2011, vol. 31, iss. 10, pp. 989–993. DOI: 10.3103/S1068798X11090139
Pimenov D.Y., Guzeev V.I., Mikolajczyk T., Patra K. A study of the influence of processing parameters and tool wear on elastic displacements of the technological systemunder face milling. The International Journal of Advanced Manufacturing Technology, 2017, vol. 92, iss. 9–12, pp. 4473–4486. DOI: 10.1007/s00170-017-0516-6
Pimenov D.Yu., Guzeev V.I., Krolczyk G., Mia Mozammel, Wojciechowski S. Modeling flatness deviation in face milling considering angular movement of the machine tool system components and tool
flank wear. Precision Engineering, 2018, vol. 54, pp. 327–337. DOI: 10.1016/j.precisioneng.2018.07.001
Hirsch A. Werkzeugmaschinen: Anforderungen, Auslegung, Ausführungsbeispiele. Wiesbaden, Springer Vieweg, 2016. 441 p. DOI: 10.1007/978-3-658-14249-0_2
Brecher C., Epple A., Neues S., Fey M. Optimal process parameters for parallel turning operations on shared cutting surfaces. International Journal of Machine Tools and Manufactur., 2015, vol. 95, pp. 13–19. DOI: 10.1016/j.ijmachtools.2015.05.003
Tyler T.C., Troutman J.R., Schmitz T.L. A coupled dynamics, multiple degree of freedom process damping model, Part 1: Turning. Precision Engineering, 2016, vol. 46, pp. 65–72. DOI:
1016/j.precisioneng.2016.03.017
Budak E., Ozturk E. Dynamics and stability of parallel turning operations. CIRP Ann. Manuf. Technol., 2011, vol. 60, iss.1, pp. 383–386. DOI: 10.1016/j.cirp.2011.03.028
Azvar M., Budak E. Multi-dimensional chatter stability for enhanced productivity in different parallel turning strategies. International Journal of Machine Tools and Manufacture, 2017, vol. 123, рр. 116–128. DOI: 10.1016/j.ijmachtools.2017.08.005
Ozturk E., Comak A., Budak E. Tuning of tool dynamics for increased stability of parallel (simultaneous) turning processes. Journal of Sound and Vibration, 2016, vol. 360, pp. 17–30. DOI: 10.1016/j.jsv.2015.09.009
Ardashev, D.V. Diagnostics of grinding by modal analysis. Russian Engineering Research, 2015, vol. 35, iss. 3, pp. 218–220. DOI: 10.3103/S1068798X15030053
Ардашев Д.В. Динамическая характеристика шлифовального круга. Технология маши-ностроения. 2010. №5. С. 18–20. [Ardashev D.V. [Grinding wheel dynamic performance].Tekhnologiya Mashinostroeniya [Mechanical Engineering Technology], 2010, no. 5, pp. 18–20. (in Russ.)]
A.A. Dyakonov, A.Kh. Nurkenov, I.V. Shmidt, A.S. Degtyareva, A.S. Ovsienko, A.D. Kazanskii. Static rigidity of numerically controlled lathes. Russian Engineering Research, 2017, vol. 37, iss. 7, pp. 622–625. DOI: 10.3103/S1068798X17070103
Sopeltzev A.V., Dyakonov A.A., Patra K. Dynamic model of material deforming under microgrinding. Procedia Engineering, 2015, vol. 129, pp. 127–133. DOI: 10.1016/j.proeng.2015.12.020
Nguyen H.T., Wang H., Hu S.J. High-definition metrology enabled surface variation control by reducing cutter-spindle deflection. 9th ASME International Manufacturing Science and Engineering
Conference (MSEC2014), Univ. Detroit, Michigan: Amer SOC Mechanical Engineers, 2014, Article Number: V001T04A038. DOI: 10.1115/MSEC2014-4017
Takasugi K., Morimoto Y., Kaneko Y., SuzukiN., Asakawa N. Improvement of machining accuracy for 3D surface machining with CNC lathe. Journal of Advanced Mechanical Design Systems and Manufacturing, 2018, vol. 12, iss. 4. DOI: 10.1299/jamdsm.2018yamdsm0089
Yang J.X., Asian D., Altintas Y. A feedrate scheduling algorithm to constrain tool tip position and tool orientation errors of five-axis CNC machining under cutting load disturbances. CIRP journal of Manufacturing Science and Technology, 2018, vol. 23, pp. 78–90. DOI: 10.1016/j.cirpj.2018.08.005
Takasugi K., Morimoto Y., Nakagaki K., Kaneko Y. Development of CAM system for 3D surface machining with CNC lathe. Journal of Advanced Mechanical Design Systems and Manufacturing, 2014, vol. 8, iss. 4, SI, Article Number: 14-00098. DOI: 10.1299/jamdsm.2014jamdsm0059
Chang Z.Y., Chen Z.Z.C., Wan N., Sun H.B. A new mathematical method of modeling parts in virtual CNC lathing and its application on accurate tool path generation. International Journal of Advanced Manufacturing Technology, 2018, vol. 95, iss. 1–4, pp. 243–256. DOI: 10.1007/s00170-017-1202-4
Yang J.X., Altintas Y. A generalized on-line estimation and control of five-axis contouring errors of CNC machine tools. International Journal of Machine Tools and Manufacture, 2015, vol. 88, pp. 9–23. DOI: 10.1016/j.ijmachtools.2014.08.0034
Zeqiri F., Alkan M., Kaya B., Toros S. Experimental Research and Mathematical Modeling of Parameters Effecting on Cutting Force and SurfaceRoughness in CNC Turning Process.9th International
Conference on Tribology (Balkantrib’ 17). IOP Conference Series-MaterialsScience and Engineering. Turkey, IOP Publishing LTD., 2018, vol. 295, UNSP 012011. DOI: 10.1088/1757-899X/295/1/012011
