Decrease in the dynamic moment in the main line of a rolling stand of a plate mill
Keywords:
plate rolling mill, roll, movement, reversing stand, spindle connection, dynamic loads, electric drive, speed, control, method, development, modeling, experiment, recommendationsAbstract
On the example of electromechanical systems of a plate mill 5000, the problem of reducing dynamic loads in the shaft ducts of the stand during the capture of metal by rolls is considered.It is noted that the amplitude of the dynamic moment largely depends on the ratio of the speed of the metal along the roller table and the linear speed of the rolls of the reversing stand.
The mechanism of occurrence of shock loads when closing the angular gap in spindle joints is considered. Experimental confirmation of the oscillatory nature of the moments during capture
is given. A method of limiting dynamic loads due to the preliminary acceleration of the electric drive before the capture and its subsequent braking with a given negative acceleration is considered. It is noted that the disadvantage of this method is the dependence of dynamic loads on
the accuracy of determining the position of the “head” of the roll relative to the stand. An improved method for controlling the speed of metal along the rolling table is proposed, which ensures the invariance of dynamic processes to the accuracy of determining the position of the metal. Tachograms of the stand electric drive are considered, explaining the essence of the developed method. The results of mathematical modeling and experimental studies performed on the mill 5000 are presented. The effectiveness of the proposed technical solution is confirmed. Recommendations are given on its implementation on rolling mills working with impact loading.
References
Примеры инновационных разработок фирмы VAI в области технологии горячей прокатки / Т. Нийхьюс, А. Сейлингер, Т. Кирнер и др. // Черные металлы. – 2005, № 7–8. – С. 129–135.
Bass, G.V. Minimum tension control in finishing train of hot strip mills / G.V. Bass // Iron and steel Engineer. – 1987. – № 11. – P. 48–52.
Bhowal, P. Modeling and Simulation of Hidraulic Gap Control System in a Hot Strip Mill / P. Bhowal, S.K. Mukherjee // ISIJ International. – 1996. – Vol. 36, № 5. – P. 553–562.
Tanimoto, S. New tension measurement and control system in hot strip finishing mill / S. Tanimoto, Y. Hayashi, M. Saito // Meas. And Contr. Instrum. Iron and Steel Ind. Prod 5-th Process Technical Congress, Detroit. Werrendale, Pa. – 1985. – P. 147–154.
Hamada, K. Finishing mill tension control system in the Mizushima hot strip mill / K. Hamada, S. Ueki, M. Shitomi // Kawasaki steel technical report. – 1985. – № 11. – P. 35–43.
Wright, J. Mill drive system to minimize torque amplification / J. Wright // Iron and Steel Engineer. – 1976, July. – Р. 56–60.
Мещеряков, В.Н. Разработка способа снижения динамических нагрузок электропривода прокатной клети стана холодной прокатки / В.Н. Мещеряков, В.М. Толчеев // Электротехнические системы и комплексы. – 2015. – № 3. – С. 14–19.
Мещеряков, В.Н. Регулирование натяжения полосы в чистовой группе непрерывного широкополосного стана горячей прокатки по косвенному принципу / В.Н. Мещеряков, Е.Е. Диденко // Электротехнические системы и комплексы. – 2014. – № 1 (22). – С. 40–43.
Мещеряков, В.Н. Математическое описание механической системы двух смежных клетей чистовой группы непрерывного стана горячей прокатки / В.Н. Мещеряков, Е.Е. Диденко // Электротехнические комплексы и системы управления. – 2010. – № 3. – С. 8–13.
Speed and Load Modes of Rolling Hollow Billet at the Wide-Strip Rolling Mill / A.A. Radionov, A.S. Karandaev, V.R. Khramshin et al. // Proceedings of 2014 International Conference on Mechanical Engineering, Automation and Control Systems (MEACS). – 2014. DOI: 10.1109/MEACS.2014.6986841
System for Speed Mode Control of the Electric Drives of the Continuous Train of the Hot-Rolling Mill / V.R. Khramshin, A.S. Evdokimov, G.P. Kornilov et al. // Proceedings of the 2015 International Siberian Conference on Control and Communications (SIBCON–2015). – Omsk: Omsk State Technical University. – 2015. DOI 10.1109/SIBCON.2015.7147264
Algorithm of No-Pull Control in the Continuous Mill Train / V.R. Khramshin, S.A. Evdokimov, А.S. Karandaev, I.Yu. Andryushin, A.G. Shubin // Proceedings of the 2015 International Siberian Conference on Control and Communications (SIBCON–2015). – Omsk: Omsk State Technical University. – 2015. DOI 10.1109/SIBCON.2015.7147263
Hot strip mill nonlinear torsional vibration with multi-stand coupling/ Xiaobin Fan, Yong Zang, Feng Wang, Ke Jin // Jve International Ltd. Journal Of Vibroengineering. – 2015. – Vol. 17. – P. 1623–1633.
Mackel, Jerry Maintenance and quality related monitoring of rolling mill main drives / Jerry Mackel, Martin Fieweger, Andreas Asch – Vanderbijlpark, South-Africa: Saruc, 2002. – 14 p.
Asch, A. The influence of main drive design on economical operation of a wide hot strip mill / A. Asch, C. Aigner // Proceedings of the SEAISI Singapore Conference. – 2001.
Reduction of the Dynamic Loads in the Universal Stands of a Rolling Mill / V.R. Khramshin, A.S. Karandaev, S.A. Evdokimov et al. // Metallurgist. – 2015. – Vol. 59. № 3-4. – P. 315–323. DOI: 10.1007/s11015-015-0103-8. 15
Constraining the Dynamic Torque of a Rolling Mill Stand Drive / V.R. Khramshin, V.R. Gasiyarov, A.S. Karandaev et al. // Вестник ЮУрГУ. Серия «Энергетика». – 2018. – Vol. 18, № 1. – P. 101–111. DOI: 10.14529/power180109
Krot, P.V. Hot rolling mill drive train dynamics: torsional vibration control and backlash diagnostics / P.V. Krot // Millennium Steel China. Annual Issue. – 2009. – P. 91–95.
Krot, P. Nonlinear vibrations and backlashes diagnostics in the rolling mills drive trains / P. Krot // Proceedings of the 6th EUROMECH Nonlinear Dynamics Conference (ENOC '08). Saint Petersburg – 2008. – P. 26–30.
Progress in Equipment Diagnosis Techniques at Kawasaki Steel Corporation / Akira Ichihara, Satoshi Kasai, Hiromasa Yamamoto and others // Kawasaki Steel Giho. – 1990. – № 22. – P. 69–73.
Gudehus, H. Measurement and calculation of rolling torque in the biting phase for hot rolling / H. Gudehus // Stahl und Eisen. – 1983. – № 15/16. – P. 15–24.
Артюх, В.Г. Основы защиты металлургических машин от поломок / В.Г. Артюх. – Мариуполь: Издат. группа «Университет», 2015. – 288 с.
Салганик, В.М. Современные технологии производства листового проката / В.М. Салганик // Инновационные технологии в металлургии и машиностроении: материалы 6-й международной молодежной научно-практической конференции «Инновационные технологии в металлургии и машиностроении. Уральская научно-педагогическая школа имени профессора А.Ф. Головина». – Екатеринбург: Изд-во Урал. ун-та, 2012. – С. 353–358.
Mathematical Modeling of Mechatronics System “Hydraulic Screwdown Mechanism – Electric Drive of Rolling Mill Stand” / A.A. Radionov, V.R. Gasiyarov, S.N. Baskov et al. // 9th International Conference on Mechatronics and Manufacturing (ICMM 2018). IOP Conf. Series: Materials Science and Engineering. – 2018. – Vol. 361. – № 012020. DOI: 10.1088/1757-899X/361/1/012020
