Mathematical model of the working process of cone-shaped roller
Keywords:
sealing materials, compaction, deep compaction, cone-shaped roller, precessing shaftAbstract
The choice of the design type of sealing machines depends on many factors: the type of compacted material (soil, crushed stone, gravel, slag, rock coarse soils, asphalt concrete, concrete); the state of the soil (optimal humidity, waterlogged, watering, bulk, subsidence); the thickness of the compacted layers (layer-by-layer compaction thin layers, compaction immediately to the entire thickness of the filling to the design mark) and the working conditions of the machine (cramped working conditions, a wide range of works). The article presents the design of the unit for deep soil compaction developed by the specialists of the Institute of hydrodynamics “Siberian branch of the Russian Academy of Sciences” (SB RAS) and its design and technological branch. Based on the assessment of the advantages and disadvantages of the unit for deep compaction of the soil, a new technical solution based on a cone roller is proposed, which provides more favorable conditions for removing air from the massif of the compaction material. A mathematical model of the cone roller using the method of decomposition of the periodic function in the Fourier series, which determined the constant force and the sum of harmonic forces in the operation of the cone working body. The main working body of cone-shaped rolling machines for soil bases of roads are rollers with variable diameter in height. When rolling, the working body acts onthe sealing surface in a narrow zone. The compressive force will be maximum in the center and decrease to zero at the edges of the sealing zone. The study considers the design of a physical model of a cone-shaped roller in the form of a single roller and a self-centering working body with several rollers
References
Дорожные катки: развитие, конструкция, расчет: учеб. пособие / под общ. ред. В.И. Баловнева, С.Н. Иванченко. – Хабаровск: ТОГУ, 2016. – 215 с.
Минаев, О.П. Основы и методы уплотнения грунтов оснований для возведения зданий и сооружений / О.П. Минаев. – СПб., 2014. – 295 с.
Луцкий, С.Я. Интенсивная технология упрочнения слабых оснований земляного полотна / С.Я. Луцкий, А.Б. Сакун // Транспортное строительство. – 2015. – № 08. – С. 18–22.
Method of increasing the roughness of the existing road / O. Skrypchenko, K. Katerina, K. Tetiana, A. Bieliatynskyi // 15th International scientific conference “Underground Urbanisation as a Prerequisite for Sustainable Development”. – 2016. – No. 165. – P. 1766–1770. DOI: 10.1016/j.proeng.2016.11.920
Dynamic soil compaction – recent methods and research tools for innovative heavy equipment approache / P. Holger, B. Marco, K. Alexander et al. // The 5th International Conference of Euro Asia Civil Engineering Forum (EACEF-5). – 2015. – No. 125. – P. 390–396. DOI: 10.1016/j.proeng.2015.11.096
Minaev, O.P. Russian methods and equipment for spatial vibrocompaction foundations and structures / O.P. Minaev // 15th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, ARC 2015: New Innovations and Sustainability. – 2015. – P. 2747–2750. DOI: 10.3208/jgssp.TC305-11
Methodology of ensuring road traffic safety with respect to road-building materials compaction efficiency factor / N. Sergei, K. Viktor, R. Sergei, M. Sergei // 12th International Conference “Organization and Traffic Safety Management in Large Cities”, SPbOTSIC-2016. – 2016. – P. 28–30. DOI: 10.1016/j.trpro.2017.01.073
Massarsch, K.R. Deep vibratory compaction of granular soils / K.R. Massarsch, B.H. Fellenius // Chapter 19 in Ground Improvement-Case Histories, Elsevier publishers, 2005. – P. 633–658.
Evaluation of the dynamic cone penetrometer to detect compaction in ripped soils / C.T.S. Beckett, S. Bewsher, A.L. Guzzomi et al. // Soil and Tillage Research. – 2018. – No. 175. – P. 150–157. DOI: 10.1016/j.still.2017.09.009
Барац, Н.И. Механика грунтов: учеб. пособие / Н.И. Барац. – Омск: Изд-во СибАДИ, 2008. – 106 с.
Криворотов, А.П. Эффективность уплотнения слабых грунтов методом раскатки скважин / А.П. Криворотов, А.В. Лубягин // Изв. вузов. Строительство. – 2006. – № 5. – С. 59–65.
Технология и оборудование для глубокого трамбованные грунта / В.С. Миронов, П.Я. Фадеев, В.Я. Фадеев, М.С. Мандрик // Строительные и дорожные машины. – 2015. – № 8. – С. 2–4.
Пат. № 161212 Российская Федерация. Устройство для раскатки котлованов / Е.И. Кромский, Д.Р. Каюпов, А.С. Гладченко. – № 2015141387; заявл. 29.09.2015; опубл. 10.04.2016, Бюл. № 10. – 5 с.
Блехман, И.И. Что может вибрация? О «вибрационной механике» и вибрационной технике / И.И. Блехман. – М.: Наука, 1988. – 208 с.
Evaluation of a machine to determine maximum bulk density of soils using the vibratory method / L. Lynessa, I. E. Edwin, T. Anika, B. Robert // Biosystems Engineering. – 2019. – Vol. 178. – P. 109–117. DOI: 10.1016/j.biosystemseng.2018.11.006
Advances in numerical modelling of different ground improvement techniques / E. Heins, K.-F. Seitz, A. Chmelnizkij et al. // Geotechnical Engineering. – 2017. – No. 48 (3). – P. 87–94.
Болдырев, Г.Г. Методы определения механических свойств грунтов. Состояние вопроса: моногр. / Г.Г. Болдырев. – Пенза: ПГУАС, 2008. – 696 с.
Baidya, D.K. Investigation of Resonant Frequency and Amplitude of Vibrating Footing Resting on a Layered Soil System / D.K. Baidya, Krishna, G. Murali // Geotechnical Testing Journal. – 2001. – Vol. 24, No. 4. – P. 409–417.
Triantafyllidis, Th. A simplified model for vibro compaction of granular soils / Th. Triantafyllidis, I. Kimmig // Soil Dynamics and Earthquake Engineering. – 2019. – Vol. 122. – P. 261–273. DOI: 10.1016/j.soildyn.2018.12.008
Новое сменное оборудование гидравлического экскаватора / Е.И. Кромский, С.В. Кондаков, К.З. Тиллоев, Х.И. Кадырова // Политехн. вестник. Серия «Инженерные исследования». – 2018. – № 3 (43). – С. 50–54.
