FORMATION OF GEARINGS FROMINVOLUTE-BEVEL GEARS
Keywords:
involute bevel gear, gears, drivescarsAbstract
When designing modern machine drives based on traditional gears, in some cases there are problems associated with the complexity of the rational layout of the drive, and its load capacity. These problems can be solved using gears with involute bevel wheels. The involute bevel gear (IBG) is the most common case of gearwheel with an involute tooth profile. In IBG, when teeth are formed, the tool displacement coefficient varies linearly along the width of the gear rim.
The geometry of the IBG and the gears made up of them was developed at the Department of Technical Mechanics, a branch of SUSU in Zlatoust. The article presents the main dependencies necessary for determining the size of the IBG and possible schemes for the formation of gears with the IBG. Gearings on the base can be formed at any position of the axles of the gears in space. This paper presents schemes for the formation of spatial (on intersecting axes), bevel (on intersecting axes), cylindrical (on parallel axes) transmissions with IBG. The advantages of gears with IBG (layout, operational, load) in relation to gears from traditional cylindrical and bevel wheels are shown. Thus, transmissions from the IBG on intersecting axes make it possible to transmit rotation at arbitrarily small distancesbetween the axles of the wheels with the required contact localization, up to obtaining a linearcontact in gearing of the teeth. Bevel gears
with IBG are less sensitive to errors and can be formed at small interaxial angles, which is problematic for traditional bevel gears. Cylindrical gears with IBG differ from traditional ones in increased load capacity and smooth operation. In addition, they can be used as backlashless and single-sided gears. Thus, gears with IBG due totheir versatility and advantages over traditional gears can be successfully used in modern drives(aviation, space, automobile, etc.) with any arrangement of gear axles in space.
References
Gavrilenko V.A. Osnovy teorii evol'ventnyh zubchatyh peredach[Fundamentals of the Theory of Involute Gearings]. 2nd ed., revised. Moscow, Engineering Publ., 1969. 431 p.
Bolotovskogo I.A. (Ed.) Spravochnik po geometricheskomu raschetu evol'ventnyh zubchatyh i chervyachnyh peredach[Handbook for the Geometric Calculation of Involute Gears and Worm Gears]
Moscow, Engineering Publ., 1986. 448 p.
Litvin F.L. A Fuentes Gear Geometry and Applied Theory, 2nd ed. Cambridge University Press, Cambridge, 2004. 795 p.
Lopatin B.A., Cukanov O.N. Cilindro-konicheskie zubchatye peredachi: monografiya [HelicalBevel Gearings: monograph]. Chelyabinsk: South Ural St. Univ. Publ., 2005. 200 p.
Kapelevich A.L. Direct gear design for asymmetric tooth gears. Mechanisms and Machine Science, 2016, pp. 117–143.
Cukanov O.N. [Helical-Bevel Gears in Machine Drives]. Engineering Bulletin, 2003, no. 8, pp. 7–9. (in Russ.)
Cukanov O.N., Poluektov E.A. [Electromechanical Drive for Angular Mechanisms Turning Objects of Space Technology]. Engineering Bulletin, 2009, no. 2, pp. 14–16.
Khaustov S.A. Involute Helical-Bevel Gearing. Procedia Engineering Ser. International Conference on Industrial Engineering, ICIE 2015, 2015, pp. 891–895.
Brown F.W., Davidson S.R., Hanes D.B., Weires D.J., Kapelevich A.L. Analysis and Testing of Gears with Asymmetric Involute Tooth Form and Optimized Fillet Form for Potential Application in Helicopter Main Drives. American Gear Manufacturers Association Fall Technical Meeting, 2010, pp. 172–186.
Novikov A.S., Paikin A.G., Dorofeyev V.L., Ananiev V.M., Kapelevich A.L. Application of Gears with Asymmetric Teeth in Turboprop Engine Gearbox. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007, 2007, pp. 327–334.
Eremin V.P., Eremin N.V., Kirillin A.N. et al. Sozdanie elektromekhanicheskih privodov novogo pokaleniya transformirovannyh kosmicheskih system[Creation of Electromechanical Drives of
a New Generation of Transformed Space Systems]. Samara, 2011.
Syzrantsev V., Syzrantseva K., Pazyak A., Milanovic M. Research on Geometrical Characteristics of Straight Bevel Gears with a Small Shaft Angle with a Non-Generated Gear and Generated Pinion. FME Transactions, 2017, vol. 45 (4), pp. 661–669.
Syzrantsev V., Syzrantseva K., Milanovic M., Pazyak A. Determination of Geometrical Parameters for Semi-Rolling Bevel PrecessionalGears with Straight Teeth. IOP Conference Series: Materials Science
and Engineering, 2016, vol. 142 (1), Article number 012086. DOI: 10.1088/1757-899X/142/1/012086
Lopatin B.A., Plotnikova S.V.Helical-Bevel Gearing withSmall Wheel Axles Angles. Procedia Engineering Ser. International Conference on Industrial Engineering, ICIE 2017, 2017, pp. 1189–1194.
Bruzhas V.V. Development of Solid-State Models for the Gears of Different Geometry. Procedia Engineering, 2015, vol. 129, pp. 369–373.
Kapelevich A.L., Taye E. Self-locking gears: Design and potential applications. American Gear Manufacturers Association Fall Technical Meeting, 2010, pp. 212–219.
Vasin G.G., Bezrukov V.I., Pozhbelko V.I. Mekhanizm svobodnogo hoda[Freewheel Mechanism]. Patent USSR, no. 901682, 1982.
Bezrukov V.I., Kazartcev D.N., Rublev V.M. et al. Bezzazornaya zubchataya peredacha [Gearless Gearing]. Patent USSR, no. 1634896, 1991.
Lopatin B.A., Plotnikova S.V. Finishing of the Helical-bevel Gear Teeth Flanks. Procedia Engineering Ser. International Conference on Industrial Engineering, ICIE 2015, 2016, pp. 889–893.
Storchak M. Simulation of the Teeth Profile Shaping During the Finishing of Gears. Mechanisms and Machine Science, 2020, vol. 81, pp. 365–384.
