Adaptation of a Mathematical Model of Generalized Heat Exchange in Furnaces
DOI:
https://doi.org/10.14529/power200402Keywords:
heat transfer paradigm, furnace, heat flows, temperature distribution, correctness, recircu¬lation.Abstract
Consideration of the scheme of flows of combustion products in furnaces and flow chambers of combustion within the framework of the heat transfer paradigm made it possible to determine the ratio of the generalized mechanisms of heat transfer – convection and radiation. The transition from uniform distribution of gas flow velocity to uneven distribution in furnaces with a geometrically peculiar fence has been implemented. This made it possible to take into account the use of recirculation gases, dual-light shades, changes in the shape and size of the cross-section of the furnace, and installation of shade surfaces in a furnace. The conditions for the correctness of the mathematical model are considered, and the eigenvalues of the boundary value problem under conditions of an asymmetric temperature field and the function of the gas temperature changing alongthe height of the furnace are obtained. A comparative analysis of the nature of the change in gas temperature with height according to the proposed model with the calculation for a steam boiler with a capacity of 950 t/h according to the standard method showed a satisfactory agreement of the calculated data with an accuracy of +4.87 %.
References
Toropov E.V., Osintsev K.V. Mathematical Model of Generalized Heat Transfer Inside Boiler Unit Furnace – Heat Exchange Paradigm. Bulletin of the South Ural State University. Ser. Power Engineering, 2017, vol. 17, no. 1, pp. 5–12. (in Russ.) DOI: 10.14529/power170101
Alstom. Available at: http://www.alstom.com (accessed: 01.11.2016).
Modeling Software products. ANSYS. Available at: http://www.ansys.com/products (accessed: 01.11.2016)
Shvydky V.S., Spirin N.A., Ladygichev M.G., Yaroshenko Yu.G., Gordon Ya.M. Elementy teorii sistem i chislennyie metody modelirovaniya protsessov teplomassoperenosa [Elements of the Theory of Systems and Numerical Methods of Modeling of Processes of Heat and Mass Transfer]. Moscow, Intermet Engineering Publ., 1999, 520 p.
Konyashkin V.F. Modelirovanie fizicheskikh processov v kol'cevoy topke s pomoshch'yu programmy FLUENT [Modeling of physical processes in a ring furnace using the FLUENT program]. Novosibirsk, House of the Institute of Thermophysics SB RAS Publ., 2006. Ser. Combustion of solid fuel., part 1, pp. 170–178. (in Russ.)
Spaulding D.B. [Computational fluid dynamics (CFD): past, present and future]. Trudy XVI shkoly-seminara molodykh uchenykh i specialistov pod rukovodstvom akad. RAN A.I. Leont'eva [Computational Fluid Dynamics (CFD): Past, Present, and Future. Proceedings of the XVI school-seminar of young scientists and spe-cialists under the leadership of Acad. RAS Leontiev A. I.]. Moscow, MPEI publishing house Publ., 2007, vol. 1, pp. 9–13. (in Russ.)
Verbovetskiy E.Kh., Zhmerik N.G. Metodicheskie ukazaniya po proektirovaniyu topochnykh ustroistv en-ergeticheskikh kotlov [Guidelines for the design of furnace devices of energy boilers]. St. Petersburg, NPO TSKTI-VTI Publ., 1996, 270 p.
Roslyakov P.V. Metody zaschity okruzhayuschey sredy. [Methods of environmental protection]. Moscow, MPEI publishing house Publ., 2007, 336 p.
Kuznetsov N.V., Mitor V.V., Dubrovsky I.E., Karasina E.S. Teplovoy raschet kotelnyikh agregatov. Norma-tivnyiy metod. [Thermal calculation of boiler units. Standard Method]. 2nd ed., reprint. Minsk, EKOLIT Publ., 2011, 296 p.
Korn G., Korn Т. Spravochnik po matematike dlya nauchnykh rabotnikov i inzhenerov: opredeleniya, te-oremy, formuly. [Mathematical Handbook for Scientists and Engineers]. Saint-Petersburg, Lan Publ., 2003, 832 р.
Jeffries G., Swirls B. Metody matematicheskoy fiziki: vyp. 1 [Methods of mathematical physics: issue 1]. Moscow, MIR Publ., 1969, 423 p.
Mitor V.V. and Marshak Yu.L. (Eds.). Proektirovanie topok s tverdym shlakoudaleniem [Designing fur-naces with solid slag removal]. Leningrad, NPO TSKTI-VTI Publ., 1981, 186 p.
Sivukhin D.V. Obshchiy kurs fiziki. V 5 t. T. II: Termodinamika i molekulyarnaya fizika [General physics course. At 5 books. Book II: Thermodynamics and molecular physics]. Moscow, Fizmatlit Publ., 2006, 544 p.
Toropov E.V., Osintsev K.V. Adaptation of Differential Equation of the Energy to Conditions of Furnace Processes in the Boiler Units. Bulletin of the South Ural State University. Ser. Power Engineering, 2015, vol. 15, no. 1, pp. 5–10. (in Russ.) DOI: 10.14529/power150101
Telegin A.S., Shvydky V.S., Jaroshenko Yu.G. Teplomassoperenos [Heat and Mass Transfer]. Moscow, Akademkniga Publ., 2002, 455 p.
Lykov A.V. Teplomassoobmen: spravochnik [Heat And Mass Transfer. Reference book]. Moscow, Ener-giya Publ., 1978, 480 p.
Nesenchuk A.P. (Ed.). Teplo- i massoobmen: ucheb. posobie. V 2 ch. Ch. 1 [Heat and mass transfer: text-book allowance. At 2 parts. Part 1]. Minsk, BNTU Publ., 2007, 606 p.
Osintsev K.V. Toropov E.V. Raschet teploobmena v topke kotel'nogo agregata [Calculation of heat transfer in the furnace of the boiler unit]. Chelyabinsk, SUSU Publishing Center, 2010, 179 p.
