Automatic System of Synchronous Connection of Backup Power Supply Source in Power Systems with Motor Load
DOI:
https://doi.org/10.14529/power200404Keywords:
synchronous connection, continuous technological process, motor load, power switching, automatic transfer switch.Abstract
We developed an automatic system of synchronous connection of a backup power supply source in power systems with synchronous and asynchronous motors in case of power loss from the main source. Here, we propose performing continuous monitoring of the instantaneous voltage values of the main and backup power sources and determining the angle between them. The time to send the command to turn the backup power switch on is determined on the basis of the results of approximating the dependence of the angle between
the voltages of the main and backup power sources on time. The proposed algorithm can be used in microprocessor fast-acting automatic transfer switch devices to ensure acceptable levels of currents of stators and electromagnetic moments of electric motors in self-starting modes and to maintain a complex continuous technological process at industrial enterprises. The effectiveness of the developed automatic system of synchronous connection of a backup power supply source has been confirmed using mathematical modeling methods and laboratory tests at an experimental stand.
References
Sivokobylenko V.F., Kostenko V.I. [Influence of starting modes and non-synchronous reclosing on insula-tion service life]. Elektricheskie stantsii [Power Technology and Engineering], 1975, no. 7, pp. 67–71. (in Russ.)
Sivokobylenko V.F., Lebedev V.K., Kukuy K.A. [Improvement scheme incorporating redundant power asynchronous motors with regard to their group coasting]. Nauchnye trudy DonGTU. Seriya “Vychislitel'naya tekhnika i avtomatizatsiya” [Scientific works of DonGTU. Series: Computer Engineering and Automation”], 2002, no. 38, pp. 97–102. (in Russ.)
High Speed Transfer Device and System SUE 3000 Product Description. ABB Power and productivity for a better world. ABB, 2010. 49 с.
Zhukov V.A., Pupin V.M., Gamazin S.I., Kulikov A.I., Cyruk S.A. [Fast-Acting ATS Device with a One-time Principle for Determining a Violation of Normal Power Supply of Consumers]. Elektrooborudovanie: ekspluataci-ya i remont [Electric equipment: operation and repair], 2011, no. 9, pp. 11–18. (in Russ.)
Kireeva E., Pupin V., Gumirov D. [Modern devices for high-speed ATS]. Glavnyy energetik [Chief Power Engineer], 2005, no. 11, pp. 23–25. (in Russ.)
Tarlochan S. Sidhu, Vinayagam Balamourougan, Manish Thakur, and Bogdan Kasztenny. A Modern
Automatic Bus Transfer Scheme, International Journal of Control, Automation, and Systems, 2005, vol. 3, no. 2 (special edition), pp. 376–385.
Jon Gardell, Chairman Dale Fredrickson, Vice Chairman. J9 Working Group Report to the Rotating Ma-chinery Protection Subcommittee of the IEEE-Power System Relay Committee, May 2012.
Nikulov I., Zhukov V., Pupin V. [The complex FATS Performance increases the reliability of power supply]. Novosti elektrotekhniki [Electrical News], 2012, no. 4, pp. 2–4. (in Russ.)
Sivokobylenko V.F., Derkachyov S.V. [Analysis of Transients Processes in Motor Load at Switching on to Reserve Power Supply Source]. Izvestiya vysshikh uchebnykh zavedenij. Elektromehanika [Russian Electro-mechanics], 2016, no. 5, pp. 69–74. (in Russ.)
Sivokobylenko V.F., Derkachev S.V. [A mathematical model of a multi-machine system for analyzing
the behavior of electric motors in FATS modes]. Nauchnye trudy DonNTU. Seriya “Elektrotekhnika i energetika” [Scientific works of DonNTU. Series “Electrical Engineering and Energy”], 2014, no. 1 (16), pp. 17–178.
(in Russ.)
Oyrekh Ya.A., Sivokobylenko V.F. Rezhimy samozapuska asinkhronnykh elektrodvigateley [Self-starting modes of induction motors]. Мoscow, Energiya Publ., 1974. 96 p.
