Development of a Laboratory Unit for Preventing Ice Formation on the Model of Power Lines
DOI:
https://doi.org/10.14529/power200405Keywords:
ice formation on power line cables, icing prevention, magnetic pulse motor, electromechanical converter, induc-tor.Abstract
This article describes the structure of a device to prevent the formation of ice on the cables of power lines using the impulse shock method with the lateral type of fastening. The actuator of the device is a magnetic pulse electromechanical energy converter. It can ensure that the parameters of the impact match the calculated values in a wide range of times and forces. This advantage determined the choice in favor of this type of actuators.
The basic functions of the device are described herein. Based on this, the functional blocks are highlighted and their description is given. The influence of various design parameters of device parts on its performance is described. We also formulated requirements for structural elements. As a result, a reasonable choice was made when designing the device. A laboratory unit was developed to prevent the formation of ice using a scaled-down model of a power transmission line cable. A system for measuring vibrations at several points of a cable is described. The results of an experimental study of wire vibrations are presented. The correspondence of
the calculated and experimental values of the cable deviation is shown, which indirectly confirms the correspondence of the developed device’s parameters to the calculated values.
References
Yur'ev S. [Icy rain: a nightmare for power engineers]. Elektroenergiya. Peredacha i raspredelenie [Electric power. Transmission and distribution], 2011, no. 1 (4), pp. 12–13. (in Russ.)
Ratushnyak V.S., Yur'ev A.V., Il'in E.S., Trukhina I.S., Ratushnyak V.S. Sposob i ustroystvo dlya udaleni-ya naledi s provodov liniy elektroperedachi [Method and device for removing ice from wires of power lines]. Pa-tent RF, no. 2666754, 2018.
Ratushnyak V.S., Ratushnyak V.S., Il'in E.S., Vahrusheva O.Y. [Some aspects of choice of means of fighting with the ice deposit on the power lines]. Izvestiya Transsiba [Journal of Transsib Railway Studies], 2019, vol. 1, no. 37, pp. 102–111. (in Russ.)
Ratushnyak V.S. [Construction of a circuit design of a device for preventing icing of power transmission lines]. Molodaya nauka Sibiri [Young science of Siberia], 2020, no. 2 (8). Available at: http://mnv.irgups.ru/ to-ma/28-20 (accessed 29.05.2020).
Tatmyshevskiy K.V., Kozlov S.A., Grigor'ev A.S. [Magnetic-pulse throwing devices for reproducing in la-boratory conditions high-speed impact]. Pribory i tekhnika eksperimenta [Instruments and experimental tech-nique], 2008, no. 3, pp. 129–136. (in Russ.)
Miroshnikov V.G., Popov V.Ya., Aleksandrov V.D. [Deformation and welding of metals by pulsed magnet-ic field pressure]. Traktory i sel'skokhozyaystvennye mashiny [Tractors and agricultural machinery], 1995, no. 5, pp. 31–33. (in Russ.)
Tyut'kin V.A. [Magnetic-pulse method of destruction of arches and cleaning of technological equipment from adhering materials]. Elektrotekhnika [Electrical technology], 2002, no. 11, pp. 24–28. (in Russ.)
Orlenko A.I., Yur'ev A.V., Il'in E.S., Ratushnyak V.S. [Experience in the application of electric pulse tech-nologies in the interests of the transport industry]. Perspektivy razvitiya servisnogo obsluzhivaniya lokomotivov [Prospects for the development of service for locomotives], 2018, pp. 281–288. (in Russ.)
Habibi H., Cheng L., Zheng H., Kappatos V., Selcuk C., Gan T. A dual de-icing system for wind turbine blades combining high-power ultrasonic guided waves and low-frequency forced vibrations. Renewable Energy, 2015, no. 83, pp. 859–870. DOI: 10.1016/j.renene.2015.05.025
Ratushnyak V.S. [Justification of the need to develop a new method for cleaning power transmission lines from ice deposits]. Innovatsionnye tekhnologii na zheleznodorozhnom transporte: sb. nauch. tr. [Innovative technologies in railway transport: Collected papers]. Krasnoyarsk, KIRT ISTU Publ., 2017, pp. 62–69. (in Russ.)
Bolyukh V.F. [Ways to improve linear electromechanical pulsed converters]. Elektrotekhnіka і El-ektromekhanіka [Electrical Engineering and Electromechanics], 2006, no. 5, pp. 14–21. (in Russ.)
Usanov K.M., Moshkin V.I., Kargin V.A., Volgin A.V. Lineynye elektromagnitnye dvigateli i privody v impul'snykh protsessakh i tekhnologiyakh [Linear electromagnetic motors and drives in pulsed processes and technologies], Kurgan, KGU Publ., 2015. 202 p.
Bolyukh V.F., Oleksenko S.V., Shchukin I.S. [Efficiency of linear pulse electromechanical converters de-signed to create shock loads and high speeds]. Elektrotekhnіka і Elektromekhanіka [Electrical Engineering and Electromechanics], 2015, no. 3, pp. 31–40. (in Russ.) DOI: 10.20998/2074-272x.2015.3.05
Bondaletov V.N., Ivanov E.N., Petrov S.R., Tyut'kin V.A. [Study of the acceleration efficiency of conduc-tors in a pulsed magnetic field of a solenoid]. Prikladnaya mekhanika i tekhnicheskaya fizika [Applied Mechanics and Technical Physics], 1983, no. 2, pp. 82–86. (in Russ.)
Tyut'kin V.A. [Study of the efficiency of electromechanical energy conversion in induction-dynamic sys-tems with multilayer inductors]. Problemy tekhnicheskoy elektrodinamiki [Problems of technical electrodynam-ics], 1979, pp. 252–253. (in Russ.)
Bolyukh V.F., Oleksenko S.V. [The effect of the number of radial cuts of a ferromagnetic screen on
the performance of a linear induction-dynamic converter]. Vіsnik NTU “KhPІ” [Bulletin of NTU “KhPI”], 2015, no. 13 (1122), pp. 45–60. (in Russ.)
Knopfel' G. Sverkhsil'nye impul'snye magnitnye polya [Super Pulsed Magnetic Fields], Moscow,
Mir Publ., 1972. 391 p.
Kalantarov P.L., Tseytlin L.A. Raschet induktivnostey: spravochnaya kniga [Inductance Calculation:
A Reference Book], Leningrad, Energoatomizdat Publ., 1986. 488 p.
Bondaletov V.N. [Induction acceleration of conductors]. Zhurnal tekhnicheskoy fiziki [Journal of Tech-nical Physics], 1967, vol. 37, iss. 2, pp. 280–287. (in Russ.)
Bolyukh V.F., Oleksenko S.V., Shchukin I.S. [Influence of the shape and location of the anchor on the ef-ficiency of the induction-dynamic motor using a 3D model]. Vіsnik NTU “KhPІ” [Bulletin of NTU “KhPI”], 2013, no. 65 (1038), pp. 63–83. (in Russ.)
Bolyukh V.F., Shchukin I.S. [Circuit design improvements of shock electromechanical transducers of in-duction type]. Elektrotekhnіka і Elektromekhanіka [Electrical Engineering and Electromechanics], 2010, no. 5,
pp. 5–11. (in Russ.)
Livshits A.L., Otto M.A. Impul'snaya elektrotekhnika [Pulse Electrical Engineering], Moscow, Ener-goatomizdat Publ., 1983. 352 p. (in Russ.)
Sedov L.I. Metody podobiya i razmernosti v mekhanike [Similarity and Dimension Methods in Mechan-ics]. Moscow, Nauka Publ., 1977. 440 p.
Ratushnyak V.S., Livshits A.V., Epihina N.O. The Numerical Studies of the Reaction of the Overhead Transmission Lines to a Transverse Impact by Shaking Off Water Droplets. 2020 International Confe¬rence on Industrial Engineering, Applications and Manufacturing (ICIEAM), 2020, pp. 1–6. DOI: 10.1109/ICIEAM48468.2020.9112040
