THE EQUIVALENT CIRCUIT PARAMETERS CALCULATION OF INDUCTION MOTORS WITH RING WINDINGS
DOI:
https://doi.org/10.14529/power220103Keywords:
induction motor, electromagnetic torque, equivalent circuit, inductances, ANSYS MaxwellAbstract
Induction motors with ring windings (IMRW) are designed for the processing of nuclear waste. The stator winding coils are covered with ceramic insulation to allow for long-term operation in conditions of increased radiation. The stator coils are ring shaped, in order to reduce the bend angle. The stator has a specific design consisting of tooth tips located around the axis of rotation and tooth cores placed over the tooth tips in a spiral. The first IMRW prototype was manufactured by UrFU together with “Uralelectromash”. It was designed to the same diameters as an induction motor of a classical design with a power P = 2.2 kW, with a synchronous rotation speed n = 1000 rpm. The fundamentally new armature design involves the search for new solutions for determining machine parameters, such as inductances, electromagnetic torques. The article discusses a method of equivalent circuit parameter calculation for IMRW using the “ANSYS Maxwell” in 3D mode. In order to determine stator winding leakage inductances, a static analysis of the model with the rotor removed was used. Mutual inductance is defined as the difference between stator winding phase impedance and leakage inductance. The active resistance of the magnetizing circuit and the impedance of the motor can be determined using the IMRW no-load and short-circuit characteristics obtained in ANSYS Maxwell. The paper also provides an example of calculating the mechanical characteristics of a motor using the analytical method (AM).This involves the use of equivalent circuit parameters, and the finite element method (FEM). The use of FEM for calculating the mechanical characteristics implies the analysis of IMRW in a dynamic mode. This allows the electromagnetic torque to be determined at a user-specified rotor speed. In conclusion, a comparative analysis of the parameters of a classic engine and IMRW engine, of the same size, is given. Recommendations are given for further improvement of the design of IMRW engines.
References
High temperature nanocomposite insulation for high power density machines / W. Yin, R. Flanagan, R. Zhao et al. Текст: электронный // 2016 IEEE International Conference on Dielectrics (ICD). Montpellier, France, 2016. DOI: 10.1109/ICD.2016.7547620
Nanostructured-coated XPLE showing improved electrical properties: Partial discharge resistance and space charge accumulation / D. Fabiani, G. Montanari, A. Cavallini et al. Текст: электронный // Proceedings of 2011 International Conference on Electrical Insulating Materials (ISEIM). Kyoto, Japan, 2011. DOI: 10.1109/ISEIM.2011.6826265
Nanostructured hybrid sheets for electrotechnical high-power insulating applications: The sol-goal route / L. Banet, G. Camino, J. Castellon et al. Текст: электронный // 2012 Annual Report Conference on Electrical Insula-tion and Dielectric Phenomena (CEIDP). Monreal, QC, Canada, 2012. DOI: 10.1109/ CEIDP.2012.6378931
Ильин А.Н. Полимерцемент как электроизоляционный материал для электротехнических систем // Электротехнические системы и комплексы. 2015. № 1 (26). С. 25–27.
Нанооксидные материалы для повышения эксплуатационных характеристик машин переменного тока / М.В. Баранов, А.Р. Бекетов, В.И. Денисенко и др. // Труды Свердловского научно-исследова-тельского института химического машиностроения. Серия: Оборудование для оснащения технологиче-ских производств. 2012. Вып. 20 (84). С. 68–76.
Патент 2121207 Российская Федерация, МПК6 H02K 1/16. Якорь многофазной электрической ма-шины / А.Т. Пластун; заявитель А.Т. Пластун. № 96111144/09; заявл. 09.06.1996; опубл. 27.10.1998; Бюл. № 30. 10 с.
Патент 2684898 Российская Федерация, МПК6 H02K 1/16, Н02К 3/238. Якорь многофазной элек-трической машины / А.С. Бердичевский, А.Т. Пластун, О.В. Тихонова и др.; заявитель УрФУ им. первого Президента России Б.Н. Ельцина. № 2018111892; заявл. 02.04.2018; опубл. 16.04.2019; Бюл. № 11. 38 с.
Optimal design of Axial-Flux Induction Motors based on an improved analytical model / S. Kahourzade,
A. Mahmoudi, E. Roshandel, Z. Cao. Текст: электронный // Energy. 2021. DOI: 10.1016/j.energy.2021.121552
Boughrara K., Dubas F., Ibtiouen R. 2-D analytical prediction of eddy currents, circuit model parameters, and steady-state performances in solid rotor induction motors // IEEE Transactions on Magnetics. 2014. DOI: 10.1109/TMAG.2014.2342666
Hong C., Huang W., Hu Z. Design and analysis of a high-speed dual stator slotted solid-rotor axial-flux induction motor // IEEE Transactions on Transportation Electrification. 2019. P. 71–79. DOI: 10.1109/TTE.2018.2880301
Dianati B., Kahourzade S., Mahmoudi A. Analytical design of axial-flux induction motors // 2019 IEEE Vehicle Power and Propulsion Conference. DOI: 10.1109/VPPC46532.2019.8952172
Eremochkin S., Dorokhov D. Analysis of Methods for Calculating Parameters of the Equivalent Circuit of a Squirrel Cage Induction Motor // 2021 XVIII International Scientific Technical Conference Alternating Current Electric Drives (ACED). 2021. DOI: 10.1109/ACED50605.2021.9462297
Efficient Approach Based on Equivalent Electric Circuit Model to Determine Rotor Bar Currents of Squir-rel Cage Induction Machines / J. Marault, A. Tounzi, F. Gillon, M. Hecquet. Текст: электронный // IEEE Tran-sactions on Magnetics. 2021. DOI: 10.1109/TMAG.2020.3011612
Simulation Calculation of Loss of Induction Traction Motor / N. Duan, X. Ma, S. Lu, S. Wang // Lecture Notes in Electrical Engineering. 2020. P. 599–606. DOI: 10.1007/978-981-33-6609-1_54
An Analytical-Numerical Approach to Model and Analyse Squirrel Cage Induction Motors / A. Marfoli, L. Papini, P. Bolognesi, C. Gerada // IEEE Transactions on Energy Conversion. 2021. P. 421–430. DOI: 10.1109/TEC.2020.3007385
Analytical Calculations of Magnetic Fields Induced by MMF Spatial Harmonics in Multiphase Cage Ro-tor Induction Motors / H. Chen, J. Zhang, J. Zhao et al. // IEEE Transactions on Magnetics. 2021. DOI: 10.1109/TMAG.2021.3103643
