About calculation of parameters of two-mass thermodynamic model of induction motor
Keywords:
induction motor, heating, thermodynamic model, cycle diagram, calculation of thermal conductivitiesAbstract
The article substantiates a practical need for simple two-mass thermodynamic models of induction drive motors at evaluation of thermal state of the stator windings and their application at the thermal protection devices. It provides the mathematical description of the thermodynamic model in which the stator winding is designed as a separate (the first) assembly, whilst the other motor portion is the second one. Based on this description, the system of equations that establishes the relationship between parameters of a two-mass thermodynamic model was formed. The performed analysis of this equation system established relationship between its parameters. For the totally enclosed induction motors, the ratio of the average value of steady-state temperature rise of the second assembly to that of the stator winding ranges within 0.75 to 0.85 under nominal operation conditions. This analysis enabled solving the problem of obtaining simple analytical relations to calculate the thermal conductivities of a two-mass thermodynamic model of the totally enclosed induction motors with minimum data on internal motor parameters.
References
Kopylov I.P., Klokov B.K. (Ed.) Spravochnik po Elektricheskim Mashinam [Handbook of Electric Ma-chines]: In 2 vol. Vol. 1. Moscow, Energoatomizdat Publ., 1988. 456 p.
Venkataraman B., Godsey B., Premerlani W., Shulman E. et al. Fundamentals of a Motor Thermal Model and its Applications in Motor Protection. Proceedings of 58th Annual Conference “Protective Relay Engineers”, Black & Veatch Corporation, Kansas City, USA, 2005, pp. 127–144.
Grundulis A.O. Zashchita Elektrodvigatelei v Selskom Khozyaistve [Electric Motor Protection in Agricul-ture]. Moscow, Kolos Publ., 1982. 140 p.
Polkovnichenko D.V. [Post-maintenance Technical Evaluation of Squirrel-cage Induction Motors]. Nauch-nye Zhurnaly NTU “KhPI”: Elektrotekhnika i Elektromekhanika [Scientific Journals of NTU “KPI”: Electrical Engineering and Electromechanics], 2005, no. 1, pp. 59–62. (in Russ.)
Ponomarev V.A., Suvorov I.F. [An Integrated Method for Diagnosis of Induction Motors Based on the Use of Artificial Neural Networks]. Novosti elektrotekhniki [Electrical Engineering News], 2011, no. 2 (68). (in Russ.)
Engelmann R.H., Middendorf W.H. Handbook of Electric Motors, Marcel Dekker, New York, 1995. 801 p.
Kotelenets N.F., Kuznetsov N.L. Ispytaniya i Nadezhnost' Elektricheskikh Mashin [Testing and Reliability of Electrical Machines]. Moscow, Vysshaya Shkola Publ., 1988. 232 p.
Metelkov V.P. [Estimation of a Resource of Induction Motors Stator Winding Insulation in Cyclic Opera-tion], Bulletin of the South Ural State University. Ser. Power Engineering, 2013, vol. 13, no. 2, pp. 96–101.
(in Russ.)
Boglietti A., Cavagnino A., Staton D.A. TEFC Induction Motors Thermal Models: A Parameter Sensitivity Analysis, IEEE Transactions on Industry Applications, vol. 41, iss. 3, May–June 2005, pp. 756–763.
Chin, Y.K., Staton, D.A. Transient Thermal Analysis Using Both Lumped-Circuit Approach and Finite Element Method of a Permanent Magnet Traction Motor, IEEE Africon, Gaborone, Botswana, September 2004, pp. 1027–1035.
Boglietti A., Cavagnino A., Staton D., Shanel M., Mueller M., Mejuto C. Evolution and Modern Ap-proaches for Thermal Analysis of electrical machines. IEEE Transactions on Industrial Electronics, vol. 56, no. 3, March 2009, pp. 871–882.
Tang W.H., Wu Q.H., Richardson Z.J. A Simplified Transformer Thermal Model Based on Thermal-Electric Analogy, IEEE Transactions on Power Delivery, vol. 19, no. 3, July 2004, pp. 1112–1119.
Zyuzev A.M., Metelkov V.P. [The Use of Thermodynamic Models for Checking an Induction Motor on the Heating]. Trudy Mezhdunarodnoy Pyatnadtsatoy Nauchno-tekhnicheskoy Konferentsii “Elektroprivody Peremennogo Toka” [Proc. of the Fifteenth International Scientific-Technical Conference Trudy “Alternating Cur-rent Electrical Drives”]. Ekaterinburg, URFU, 2012, pp. 183–186. (in Russ.)
Zyuzev A.M., Metelkov V.P. Thermodynamic Models for Asynchronous Motor Heating Tests. Russian Electrical Engineering, 2012, vol. 83, no. 9, pp. 512–515.
Bugaev G.A., Leontev A.N., Erokhin E.Yu., Pavlova D.V. [Mathematical Models of Heating and Cooling for the Microprocessor Thermal Relay]. Russian Electrical Engineering, 2001, no. 2, pp. 51–54. (in Russ.)
Egorov E.G., Genin V.S., Mikhailov N.M., Yakovlev S.K. [Microprocessor Relay for Thermal Protection of Asynchronous Motors with Squirrel-cage Rotor]. Russian Electrical Engineering, 1997, no. 1, pp. 53–55.
(in Russ.)
Fedorov M.M. [Dynamic Models of Thermal Units of Electrical Machines]. Electrical Machinery and Electrical Equipment: Collection of Scientific Papers, K. Tekhnika Publ., 1999, Iss. 53, pp. 70–73.
Fedorov M.M. [Simulation of Thermal State Units of Electrical Machines in Various Modes]. Collection of Scientific Papers DonDTU, Donetsk, DonDTU Publ., 1999, Iss. 10, pp. 90–95.
Fedorov M.M. [Features of Thermal Transients in The Induction Motor Units under Different Operating Conditions]. Electrical Machinery and Electrical Equipment: Collection of Scientific Papers, K. Tekhnika Publ., 2000, Issue 54, pp. 71–75.
Varenik E.A., Fedorov M.M., Mikhailov V.E. [Thermal Transients in Structural Elements of Induction Motors with a Fixed Rotor]. Explosion-proof Electrical Equipment: Collection of Scientific Papers UkrNIIVE, Donetsk, 2009, pp. 146–154.
Gurevich E.I., Rybin Yu.L. Perekhodnye Teplovye Protsessy v Elektricheskikh Mashinakh [Transient Thermal Processes in Electrical Machines]. Leningrad, Energoatomizdat Publ., 1983. 216 p.
