Optimization of wells operation modes by means of electrical submersible pumping unit at the present stage of oil production

Authors

  • M. I. Korabel'nikov Tyumen State Oil and Gas University, Nizhnevartovsk Branch,Nizhnevartovsk

DOI:

https://doi.org/10.14529/power170104

Keywords:

ESP (Electrical Submersible Pumping Unit), oil well, technological mode of wells, wellhead choke, frequency converter

Abstract

The history of creation of the Electrical Submersible Pump (ESP) in the United States, which celebrated its 100th anniversary and the beginning of implementation of the ESP in the Soviet Union in the middle of the last century are considered. It is noted that in Russia the rate of oil extraction from the oil fields has been increasing during the past two decades, mainly due to the use of Electrical Submersible Pumps. There are hundreds of standard sizes in the park of submersible rigs for oil production today. ESPs are designed with the outside diameter ranging from 69 to 185 mm, with the capacity of 15–2000 m3/day. In this regard, to optimize “the layer – the well – the pump” system and to improve the efficiency of oil production it is necessary not only to reasonably select the particular size of the pump, but also to skillfully control the operation of wells equipped with ESPs for a long time (for 1.5–2 years). The reason for the continuous monitoring of ESPs operating modes is the presence of a large number of geological and technological factors affecting the formation fluid influx into the well, including the effect of seasonality and weather conditions. The regulation methods of sampling from wells (productivity) by ESP with the wellhead choke and frequency converter are examined. The basic formulas for calculating the choke nozzle diameter, as compared to the use of a frequency converter are shown.

Author Biography

M. I. Korabel'nikov, Tyumen State Oil and Gas University, Nizhnevartovsk Branch,Nizhnevartovsk

-

References

Prikaz Ministra neftyanoy promyshlennosti “Ob organizatsii proizvodstva glubinnykh besshtangovykh nasosov i vnedreniya ikh v neftyanuyu promyshlennost'”, № 1338 ot 27 sentyabrya 1950 g. [The Order of the Minister of Oil Industry “On Industrial Engineering of Rodless Deep-Well Pumpsand Their Implementation in the Oil Industry”, no. 1338 from September 27, 1950].

Rasporyazhenie Pravitel'stva RF ot 13 noyabrya 2009 g. № 1715 “Ob energeticheskoy strategii Rossii na period do 2030 goda” [Decree of the Russian Government d.d. November 13, 2009. No. 1715 “On the Energy Strategy of Russia for the Period till 2030”].

Katalog oborudovaniya “Borets”, 2012 g. [The Equipment Catalogue “The Fighter”, 2012].

Katalog oborudovaniya GK “Novomet-Perm'”, 2009 g. [The Company Group Equipment Catalog “Novomet Perm”, 2009].

Gvozdev B.P., Grigoraschenko A.I., Kornilov A.E. Ekspluatatsiya gazovykh i gazokondensatnykh mestorozhdeniy: spravochnoe posobie [Exploitation of Gas and Gas Condensate Fields: a Reference Guide]. Moscow, Nedra Publ., 1988. 575 p.

Published

2017-08-02

Issue

Section

Electric power engineering