Electric AC Machines Temperature Control and Overheating Protection

Authors

  • I. V. Bryakin Institute of Automation and Information Technologies, National Academy of Sciences of the Kyrgyz Republic, Bishkek
  • I. V. Bochkarev Kyrgyz State Technical University after I. Razzakov, Bishkek
  • H. G. Bagiyev Kyrgyz State Technical University after I. Razzakov, Bishkek
  • K. K. Kelebaev Bishkek Technical College, Bishkek

DOI:

https://doi.org/10.14529/power190109

Keywords:

electric AC machines, thermal control, winding temperature control methods, thermal sensor, amplitude detector, phase detector, analog multiplier of two signals, analog divider of two signals

Abstract

The paper reviews and analyzes basic methods of alternating current electric machines (EM) windings temperature control, such as thermometer methods, resistance and embedded thermocouples set out by GOST 11828–86. It also reviews indirect control methods based on the direct measurement of other physical quantities functionally related to the desired value, and computational control methods, based on mathematical modeling of the unit heating process using thermal equivalent circuits. The paper shows that the most appropria­te EM winding temperature control method is the resistance method based on the principle of the conductor resistance – temperature dependence, which uses the EM winding as a thermal sensor. However, the EM windings thermal control problem has not been fully resolved and requires new principles for the construction of operational heating control systems. The paper suggests new method of the in-operation EM windings heating control, which does not require disconnecting from the network or disrupt the normal mode of operation.
The method is based on the use of phase relationships between measured values as an additional informative parameter. The physical effects underlying this method are analyzed, the necessary operational implementation procedure is described. It is shown that the proposed temperature control method may serve as a convenient basis to build a thermal protection system, which can be in use both in the EM shutdown and in the control signaling modes. The paper also presents the results of the experimental test of the device based on the suggested method.

Author Biographies

I. V. Bryakin, Institute of Automation and Information Technologies, National Academy of Sciences of the Kyrgyz Republic, Bishkek

-

I. V. Bochkarev, Kyrgyz State Technical University after I. Razzakov, Bishkek

-

H. G. Bagiyev, Kyrgyz State Technical University after I. Razzakov, Bishkek

-

K. K. Kelebaev, Bishkek Technical College, Bishkek

-

References

GOST 11828–86. Mashiny elektricheskiye vrashchayushchiyesya. Obshchiye metody ispytaniy [State Standard 11828–86. Rotary Electric Machines. General Test Methods]. Moscow, Standartinform Publ., 2003. 31 p.

GOST 27222–91. Mashiny elektricheskiye vrashchayushchiyesya. Izmereniye soprotivleniya obmotok mashin peremennogo toka bez otklyucheniya ot seti [State Standard 27222–91. Rotary Electric Machines. Measuring

the Resistance of Windings of AC Machines without Disconnecting from the Network]. Moscow, Standartin-form Publ., 1991. 20 p.

Dostov L.I. [The State and Prospects of Development of Measuring the Temperature of Windings of Electrical Machines in Operating Modes]. Electrotechnical industry. Ser. 01. Electr. Machines: Overview. Inform, 1990, vol. 30. 44 p. (in Russ.)

Nosyrev D.Ya., Makhalov A.V. Ustroystvo dlya izmereniya prevysheniya temperatury obmotok el-ektricheskoy mashiny peremennogo toka pod nagruzkoy [Device for Measuring the Temperature Rise of

the Windings of an AC Electrical Machine under Load]. Patent RF 2035706, no. 5000585/10; decl. 09.07.1991; publ. 20.05.1995, Bul. no. 13. 3 p.

Bochkarev I.V., Ashmarin A.V. Ustroystvo dlya izmereniya temperatury obmotki elektricheskoy mash-iny [Device for Measuring the Temperature of the Winding of an Electric Machine]. Patent USSR, no. 99887, 1981.

Bochkarev I.V., Ashmarin A.V. Ustroystvo dlya izmereniya temperatury obmotki elektricheskoy mash-iny peremennogo toka pod nagruzkoy [Device for Measuring the Winding Temperature of an AC Electrical Machine under Load]. Patent USSR, no. 1108337, 1984.

Bochkarev I.V. [Measuring the Winding Temperature of AC Machines under Load]. Russian Electric Engineering, 1999, vol. 70, no. 2, pp. 28–32.

Vlasov A.B. Modeli i metody termograficheskoy diagnostiki ob"yektov energetiki [Models and Meth-ods of Thermographic Diagnostics of Power Facilities]. Moscow, Kolos, 2006. 280 p.

Bazhanov S.A. Infrakrasnaya diagnostika elektrooborudovaniya raspredelitel'nykh ustroystv [Infrared

Diagnostics of Electrical Equipment Switchgear]. Moscow, NTF “Elektroprogress”, 2000. 76 p.

Bazhanov S.A. Teplovizionnyy kontrol' elektrooborudovaniya v ekspluatatsii. Chast' 2 [Thermal Con-trol of Electrical Equipment in Operation. Part 2]. Moscow, Energoprogress, 2005. 64 p.

Mukhin E.A., Vlasov A. B. [The Method of Calculating the Temperature of the Windings of an Elec-tric Machine Based on Quantitative Thermography]. Bulletin of MSTU: the works of Murmansk State Tech-nical University, 2011, vol. 14, no. 4, pp. 671–680. (in Russ.)

Mukhin E.A., Vlasov A. B. [Thermal Analysis of an Electrical Machine Based on Thermal Imaging].

Operation of Sea Transport, 2012, no. 1 (67), pp. 54–58. (in Russ.)

Ovcharov V.V. Ekspluatatsionnyye rezhimy raboty i nepreryvnaya diagno-stika elektricheskikh mashin v sel'skokhozyaystvennom proizvodstve [Operational Operating Modes and Continuous Diagnostics of Electrical Machines in Agricultural Production]. Kiev, USHA Publishing House, 1990. 168 p.

Bukhgolts Yu.G., Tyukov V. A., Chestyunina T. V. Osnovy aerodinamicheskikh i teplovykh raschetov v elektromekhanike [Fundamentals of Aerodynamic and Thermal Calculations in Electrical Engi-neering]. Novosibirsk, NSTU Publishing House, 2008. 201 p.

Sipailov A.G., Sannikov D.I., Zhadan V.A. Teplovyye, gidravlicheskiye i aerodinamicheskiye raschety v elektricheskikh mashinakh [Thermal, Hydraulic and Aerodynamic Calculations in Electrical Ma-chines]. Moscow, High school, 1989. 238 p.

Bespalov V.Ya., Moschinsky Yu.A., Tsukanov V.I. [Simplified Mathematical Model of Non-Stationary Heating and Cooling of the Stator Winding of an Induction Motor]. Elektrichestvo [Electricity], 2003, no. 4,

pp. 20– 26. (in Russ.)

Bugaev G.A., Erokhin Yu.V., Leontyev A.N., Shamis M.A. Sposob teplovoy zashchity dvigatelya i ustroystvo dlya yego osushchestvleniya [The Method of Thermal Protection of the Engine and Device for Its Implementation]. Patent RF 2227354, no. 2002108251/09; decl. 01.04.2002; publ. 20.04.2004, Bul. no. 11. 5 p.

Bulychev A.V., Efimov N.S., Kozlov V.N. Sposob zashchity elektroustanovki ot peregreva [Method of Protecting Electrical Installations from Overheating]. Patent RF 2586110, no. 2015113351/07; decl. 10.04.2015; publ. 10.06.2016, Bul. no. 16. 6 p.

Bochkarev I.V. [Development of the Device for Temperature Protection of AC Electrical Machines]. Problemy avtomatiki i upravleniya: nauchno-tekhnicheskiy zhurnal, NAN KR. Bishkek: Ilim [Problems of Au-tomation and Control: Scientific and Technical Journal, NAS KR. Bishkek: Ilim.], 2016, no. 2(31), pp. 84– 88. (in Russ.)

Bryakin I.V., Bochkarev I.V., Kelebaev K.K. [Diagnostics of Parameters of Electric Machines of Al-ternating Current]. Elektrotekhnicheskiye sistemy i kompleksy [Electrotechnical Systems and Complexes], 2017,

no. 4 (37), pp. 38– 44. (in Russ.) DOI: 10.18503/2311-8318-2017-4(37)-38-44

Bryakin I.V. [Adaptive Reduction Method]. Problemy avtomatiki i upravleniya: nauchno-tekhnicheskiy zhurnal, NAN KR. Bishkek: Ilim [Problems of Automation and Control: Scientific and Technical Journal, NAS KR. Bishkek: Ilim.], 2014, no. 1 (26), pp. 134– 143. (in Russ.)

Published

2019-04-12

Issue

Section

Elecromechanical systems