МАТЕМАТИЧЕСКОЕ МОДЕЛИРОВАНИЕ ПРОЦЕССОВ ДВИЖЕНИЯ ДИСПЕРСНЫХ ЧАСТИЦ В ПОТОКЕ ЖИДКОГО МЕТАЛЛА И ПРОГНОЗИРОВАНИЕ ИХ ЛОКАЛИЗАЦИИ ПРИ ЦЕНТРОБЕЖНОМ ЛИТЬЕ
Аннотация
Ключевые слова
Полный текст:
PDFЛитература
Alekseev I.A., Anikeev A.N. [Dispersed particles distribution model in centrifugal casting billet]. SUSU Science, Materials of 70th science conference, 2018, pp. 820–826. (in Russ.)
Kostenetskiy P.S., Safonov A.Y. SUSU Supercomputer Resources. Proceedings of the 10th Annual International Scientific Conference on Parallel Computing Technologies (PCT 2016). Arkhangelsk, Russia, March 29–31, 2016. CEUR Workshop Proceedings, 2016, vol. 1576, pp. 561–573.
Kiviö M., Holappa L., Louhenkilpi S. et.al. Studies on Interfacial Phenomena in Titanium Carbide/Liquid Steel Systems for Development of Functionally Graded Material. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 2016, vol. 47 (4), pp. 2114–2122. DOI: 10.1007/s11663-016-0658-1
Watanabe Y., Inaguma O., Sato H. et.al. Novel fabrication method for functionally graded materials under centrifugal force: the centrifugal mixed-powder method. Materials, 2009, vol. 2, iss. 4, pp. 2510–2525. DOI: 10.3390/ma2042510
El-Hadad S., Sato H., Miura-Fujiwara E. et.al. Fabrication of Al/Al3Ti functionally graded materials by reaction centrifugal mixed-powder method. Japanese Journal of Applied Physics, 2011, vol. 50, iss. 1, pp. 2. #01AJ02. DOI: 10.1143/JJAP.50.01AJ02
Anikeev A.N., Chumanov V.I., Kareva N.T., Okulov A.A. About influence of Disperse Particles of Carbides on Structure of Centrifugal-Cast Billets. Bulletin of the South Ural State University. Ser. Metallurgy, 2011, iss. 16, no. 14, pp. 48–50. (in Russ.)
Anikeev A.N. Polucheniye gradiyentnykh tsentrobezhno-litykh stal’nykh zagotovok putem vvedeniya v kristallizuyushchiysya rasplav dispersnykh chastits karbidov: avtoref. dis. kand. tekhn. nauk [Making gradient centrifugal casting billets by injection dispersed carbide particles to crystalizing melt. Dissertation abstract]. Chelyabinsk, 2013, pp. 16.
Anikeev A.N., Chumanov V.I., Chumanov I.V. Study of Wettability of WC with Iron Melt by Different Methods. Bulletin of the South Ural State University. Ser. Metallurgy, 2013, vol. 13, no. 2, pp. 44–46. (in Russ.)
Lee J.H., Shishidou T., Zhao Y.J. et.al. Strong interface adhesion in Fe/TiC // Philosophical Magazine, 2005, vol. 85, iss. 31, pp. 3683–3697. DOI: 10.1080/14786430500199278
Eustathopoulos N., Sobczak N., Passerone A. et.al. Measurement of contact angle and work of adhesion at high temperature. Journal of Materials Science, 2005, vol. 40 (9), pp. 2271–2280. DOI: 10.1007/s10853-005-1945-4
Wildeaj G., Perepezko H. Experimental study of particle incorporation during dendritic solidification. Materials Science and Engineering: A, 2000, vol. 283, iss. 1-2, pp. 25–37. (DOI: 10.1016/s0921-5093(00)00705-x
Wang Q., Zhang L. Detection of Non-metallic Inclusions in Centrifugal Continuous Casting Steel Billets. Metallurgical and Materials Transactions B, 2016, vol. 47, iss. 5, pp. 1594–1612. DOI: 10.1007/s11663-016-0721-y
Wang Q., Zhang L. Determination for the Entrapment Criterion of Non-metallic Inclusions by the Solidification Front During Steel Centrifugal Continuous Casting. Metallurgical and Materials Translations B, 2016, vol. 47, iss. 3, pp. 1933–1949. DOI: 10.1007/s11663-016-0661-6
Han Q., Hunt J. Particle pushing: critical flow rate required to put particles into motion. Journal of Crystal Growth, 1995, vol. 152, pp. 221–227. DOI: 10.1016/0022-0248(95)00085-2
Catalina A., Mukherjee S., Stefanescu D. A Dynamic Model for Interaction between a Solid Particle and an Advancing Solid/ Liquid Interface. Metallurgical and materials transactions A, 2000, vol. 31A, pp. 2559–2568. DOI: 10.1007/s11661-000-0200-5
DOI: http://dx.doi.org/10.14529/met200303
Ссылки
- На текущий момент ссылки отсутствуют.