Selection of steam cooling technology for high-temperature rotor areas at t-250-240 cogeneration steam turbine

O. A. Samoilov, Yu. A. Sachnin, V. N. Golochumova, Yu. A. Brodov

Abstract


The authors of the paper propose a way for automation of start-up and transient modes of the power units completed with Т-250/300-240 steam turbines based on control of thermal stresses within the HPC body because temperature-profiling rotors being critical turbine elements cannot be ensured with available methods.
At this, the forced-steam cooling system of high and intermediate pressure rotors shall be implemented for all operation modes to reduce temperature differences, thus, their criticality. The paper provides a review of patents received for schemes and methods of preparation of cooling steam for the forced cooling system of high-temperature rotors of powerful steam turbines with reheat. It also specifies the best of them. The methods of
the passive steam cooling of rotors and the limits of their application are discussed too. These schemes and solutions are estimated.


Keywords


forced steam-cooling system; automation of startup modes; steam turbine; Т-250/300-240; steam-cooling systems of turbine rotors

References


Goloshumova V.N., Brodov Y.M., Klyaynrok I.Y., Smirnov A.A. [Management of Start-up Mode of Co-generation Steam Turbine in a Combined Cycle]. Thermal Engineering, 2012, no. 12, pp. 56–64 (in Russ.)

Ivanovskiy A.A., Pohoriler V.L., Goloshumova V.N. [Calculation of Thermal Stress State of the High and Medium Pressure Rotors of Turbine T-250/300-240 in the Labyrinth Seals Area]. Elektricheskie stantsii [Power Plants], 2008, no. 1, pp. 32–37. (in Russ)

Goloshumova V.N., Brodov Y.M., Smirnov A.A. [Simulation of the Temperature Field of the Steam Tur-bine Rotor for Thermostressed State Control Systems]. Safety and Reliability of Power Industry, 2013, no. 4 (23), pp. 65–70. (in Russ.)

Kulichikhin V.V. [Measurement of Metal Temperature of the Steam Turbines Rotor Bore in Variable Modes]. Safety and Reliability of Power Industry, 2013, no. 4 (23), pp. 71–73. (in Russ.)

Plotkin E.R., Leizerovich A.S. Puskovye rezhimy parovyh turbin energoblokov [Starting Mode of Steam Turbines Units]. Moscow, Energiya Publ., 1980. 192 p.

Khomenok L.A., Bozhko V.V., Leonova I.S. [Life Extension of Steam Turbines using Cooling Systems of Thermostressed Parts of HPC and IPC]. Thermal Engineering, 2012, no. 3, pp. 21–25. (in Russ.)

Shargorodskij V.S., Homenok V.S., Shilin V.L., Cherdnichenko V.V. Paroturbinnaja ustanovka [Steam Turbine Unit]. Patent RF, no. 2053377, 1996.

Homenok V.S., Leonova I.S., Bozhko V.V, Chikileva I.V., Zajcev I.V. Paroturbinnaja ustanovka [Steam Turbine Unit]. Patent RF, no. 2319843, 2009.

Chikileva I.V., Leonova I.S., Homenok V.S., Bozhko V.V, Zajcev I.V. Paroturbinnaja ustanovka [Steam Turbine Unit]. Patent RF, no. 2358122, 2009.

Safonov L.P., Ogurcov A.P., Bakuradze M.V., Kovalenko A.N., Vajnshtejn L.L., Gudkov N.N., Mitin V.N., Carev V.N. Kompleksnaja sistema ohlazhdenija rotorov vysokogo i srednego davlenij parovoj turbiny s promperegrevom [The Integrated Cooling System of High and Medium Pressure Rotors of the Steam Turbine with Reheat]. Patent RF, no. 2118461, 1998.


Refbacks

  • There are currently no refbacks.